interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/board/stm32ldiscovery.cfg

14 lines
323 B
INI
Raw Normal View History

tcl/board: add SPDX tag For historical reasons, no license information was added to the tcl files. This makes trivial adding the SPDX tag through script: fgrep -rL SPDX tcl/board | while read a;do \ sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n }' $a;done With no specific license information from the author, let's extend the OpenOCD project license GPL-2.0-or-later to the files. Change-Id: Ibcf7da62e842aafd036a78db9ea2b9f11f79af16 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7028 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2022-06-12 16:48:05 -05:00
# SPDX-License-Identifier: GPL-2.0-or-later
cfg: add stm32ldiscovery board config Change-Id: I392fdc4c588783fda1c7d4d6413b86ae9aa3f6b9 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/442 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-10 05:04:11 -06:00
# This is an STM32L discovery board with a single STM32L152RBT6 chip.
# http://www.st.com/internet/evalboard/product/250990.jsp
jtag: drivers: stlink: handle all versions with single config Extend HLA interface to allow multiple VID/PID pairs and use it to autodetect the connected stlink version. Change-Id: I35cd895b2260e23cf0e8fcb1fc11a78c2b99c69b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3961 Tested-by: jenkins Reviewed-by: Karl Palsson <karlp@tweak.net.au> Reviewed-by: Andreas Bolsch <hyphen0break@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2017-01-26 14:41:40 -06:00
source [find interface/stlink.cfg]
cfg: add stm32ldiscovery board config Change-Id: I392fdc4c588783fda1c7d4d6413b86ae9aa3f6b9 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/442 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-10 05:04:11 -06:00
stlink: deprecate HLA support The STLink API that supports dap-direct is available from STLink firmware v2j24, published in early 2015. We can reasonably expect that any old STLink still in use today has got at least one firmware update during the last 10 years. Most of the board files in upstream OpenOCD still use the STLink in HLA mode. This limits the test coverage of the dap-direct code, which was introduced in OpenOCD v0.11.0. - Rename interface/stlink.cfg as interface/stlink-hla.cfg to still provide support for HLA, adding a deprecated message. - Rename interface/stlink-dap.cfg as interface/stlink.cfg to make dap-direct the default trasport. - Add a redirect file interface/stlink-dap.cfg for users that have out-of-tree custom board files. - Update all the board files to the new setup. - Remove STLink HLA mentions from the documentation, while adding a reference to interface/stlink-hla.cfg Checkpatch-ignore: LONG_LINE Change-Id: I99366bb03cd3b83f8f408514e657f30e59813063 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/8523 Tested-by: jenkins Reviewed-by: Andrzej Sierżęga <asier70@gmail.com>
2024-10-12 04:48:05 -05:00
transport select dapdirect_swd
Allow transports to override the selected target (hla configs unification) This should allow to share common configs for both regular access and high-level adapters. Use the newly-added functionality in stlink and icdi drivers, amend the configs accordingly. Runtime-tested with a TI tm4c123g board. Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad Signed-off-by: Paul Fertser <fercerpav@gmail.com> [gus@projectgus.com: context-specific deprecation warnings] Signed-off-by: Angus Gratton <gus@projectgus.com> [andrew.smirnov@gmail.com: additional nrf51.cfg mods] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Reviewed-on: http://openocd.zylin.com/1664 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-28 05:23:15 -05:00
cfg: increase stm32l-discovery working area This part has 16k ram so make it all available. Change-Id: Ifeb7bc850bfe4f68d0affb8f6a0931b4327e7257 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1006 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-12-06 09:43:39 -06:00
set WORKAREASIZE 0x4000
stm32l: split l0/l1 support no jtag, different HSI settings L0 is cortex m0+, so different id codes, SWD only, different addresses for the clock speedup. It has no endian options, no boundary scan. Removed all L0 specific portions from L1 files, and renamed files to clarify their purpose. The deprecated stm32lx_stlink.cfg is kept as is, as it is only around for backwards compatibility with prior releases. Tested on STM32L053 Discovery and STM32L151 Discovery. Has _not_ been tested with jtag on L1. Change-Id: I8eea890d2f92a302d9e9c8a8832d218ee1b6bcfc Signed-off-by: Karl Palsson <karlp@tweak.net.au> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2405 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Juha Niskanen <juha.niskanen@haltian.com>
2014-11-21 16:14:57 -06:00
source [find target/stm32l1.cfg]
Use hardware reset and connect under reset on boards with ST-LINK/V2, as now it is supported. Change-Id: Id3b2ca9a2270974a5f453323f9057ecece400c94 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/609 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-01 12:47:28 -05:00
cfg: add srst_nogate to the supported targets, remove from board configs It depends on the particular target whether it can work with SRST asserted or not, so this belongs to the target config rather than the board config. Also, this allows for simple openocd -f myboard.cfg -c "reset_config connect_assert_srst" command to be used whenever a user feels a need to connect to an unresponsive target. Change-Id: I3d8da9ae47088fc0c75a20bfdd20074be1014de0 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2459 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-10 04:19:26 -06:00
reset_config srst_only