interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/board/st_nucleo_l5.cfg

14 lines
308 B
INI
Raw Normal View History

flash/stm32l4x: STM32L55/L56xx basic support (non-secure mode) STM32L5 have 512 Kbytes of Flash memory with dual bank architecture. STM32L5 flash is quite similar to L4 flash, mainly register names and offsets and some bits are changed. NON-SECURE flash is located at 0x8000000 like L4 devices, so no big change is needed (secure flash will be subject of another change). Note: flash driver name is set stm32l5x, in order to extend the commands with specific L5 commands (to manage TZEN for example ...) Note: this works only when TZEN=0 Change-Id: Ie758abb4aa19a3f29eeb0702d7dcb43992e4c639 Signed-off-by: Michael Jung <mijung@gmx.net> Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5510 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-03-25 10:33:30 -05:00
# SPDX-License-Identifier: GPL-2.0-or-later
# This is for STM32L5 Nucleo Dev Boards.
# http://www.st.com/en/evaluation-tools/stm32-mcu-nucleo.html
stlink: deprecate HLA support The STLink API that supports dap-direct is available from STLink firmware v2j24, published in early 2015. We can reasonably expect that any old STLink still in use today has got at least one firmware update during the last 10 years. Most of the board files in upstream OpenOCD still use the STLink in HLA mode. This limits the test coverage of the dap-direct code, which was introduced in OpenOCD v0.11.0. - Rename interface/stlink.cfg as interface/stlink-hla.cfg to still provide support for HLA, adding a deprecated message. - Rename interface/stlink-dap.cfg as interface/stlink.cfg to make dap-direct the default trasport. - Add a redirect file interface/stlink-dap.cfg for users that have out-of-tree custom board files. - Update all the board files to the new setup. - Remove STLink HLA mentions from the documentation, while adding a reference to interface/stlink-hla.cfg Checkpatch-ignore: LONG_LINE Change-Id: I99366bb03cd3b83f8f408514e657f30e59813063 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/8523 Tested-by: jenkins Reviewed-by: Andrzej Sierżęga <asier70@gmail.com>
2024-10-12 04:48:05 -05:00
source [find interface/stlink.cfg]
flash/stm32l4x: STM32L55/L56xx basic support (non-secure mode) STM32L5 have 512 Kbytes of Flash memory with dual bank architecture. STM32L5 flash is quite similar to L4 flash, mainly register names and offsets and some bits are changed. NON-SECURE flash is located at 0x8000000 like L4 devices, so no big change is needed (secure flash will be subject of another change). Note: flash driver name is set stm32l5x, in order to extend the commands with specific L5 commands (to manage TZEN for example ...) Note: this works only when TZEN=0 Change-Id: Ie758abb4aa19a3f29eeb0702d7dcb43992e4c639 Signed-off-by: Michael Jung <mijung@gmx.net> Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5510 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-03-25 10:33:30 -05:00
transport select dapdirect_swd
source [find target/stm32l5x.cfg]
# use hardware reset
reset_config srst_only srst_nogate