interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/interface/stlink-dap.cfg

21 lines
682 B
INI
Raw Normal View History

stlink: add DAP direct driver STLINK-V3 and the new firmware V2J24 for ST-LINK/V2 provide API to directly access the DAP registers. This mode permits to use the native target in cortex_m.c, with no need to override it with the target in hla_target.c. Other advantages wrt HLA are: support for Cortex-A cores, support for SoC multi-core and/or multi AP, support for OpenOCD commands "dap" thus including control of CSW. This obsoletes the existing HLA driver for ST-Link, that should anyway be kept for those cases where it's not possible to update the ST-Link firmware. This commit introduces the minimal implementation for direct DAP access. The implementation is much slower than the HLA because every memory transfer requires several USB packets. Further commits will close the performance gap. The whole ST-Link driver is compiled under BUILD_HLADAPTER, to remove the need to split the driver between the two modes. This has to be reworked, but it's quite invasive! A new interface file stlink-dap.cfg is added and should be used in place of stlink.cfg to enable the DAP mode. Documentation is updated and reports limitation on the maximum AP number that can be accessed by ST-Link for some firmware already tested. Change-Id: I932ffe16bc81d00b1fe489e2944fda13470cce9b Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4904 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2019-01-28 11:53:53 -06:00
#
swim: add new transport Add SWIM and STM8 to documentation and update TODO file. Introduce transport "swim" and command "swim newtap". Switch in swim.c from HLA API to the new SWIM API. Implement in stlink driver the SWIM APIs as wrappers of existing HLA functions. Remove any SWIM related reference from HLA files. Update stm8 config files and stlink-dap interface config file. Change-Id: I2bb9f58d52900f6eb4df05f979f7ef11fd439c24 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5530 Tested-by: jenkins
2020-01-27 11:45:10 -06:00
# STMicroelectronics ST-LINK/V1, ST-LINK/V2, ST-LINK/V2-1, STLINK-V3 in-circuit
stlink: add DAP direct driver STLINK-V3 and the new firmware V2J24 for ST-LINK/V2 provide API to directly access the DAP registers. This mode permits to use the native target in cortex_m.c, with no need to override it with the target in hla_target.c. Other advantages wrt HLA are: support for Cortex-A cores, support for SoC multi-core and/or multi AP, support for OpenOCD commands "dap" thus including control of CSW. This obsoletes the existing HLA driver for ST-Link, that should anyway be kept for those cases where it's not possible to update the ST-Link firmware. This commit introduces the minimal implementation for direct DAP access. The implementation is much slower than the HLA because every memory transfer requires several USB packets. Further commits will close the performance gap. The whole ST-Link driver is compiled under BUILD_HLADAPTER, to remove the need to split the driver between the two modes. This has to be reworked, but it's quite invasive! A new interface file stlink-dap.cfg is added and should be used in place of stlink.cfg to enable the DAP mode. Documentation is updated and reports limitation on the maximum AP number that can be accessed by ST-Link for some firmware already tested. Change-Id: I932ffe16bc81d00b1fe489e2944fda13470cce9b Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4904 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2019-01-28 11:53:53 -06:00
# debugger/programmer
#
swim: add new transport Add SWIM and STM8 to documentation and update TODO file. Introduce transport "swim" and command "swim newtap". Switch in swim.c from HLA API to the new SWIM API. Implement in stlink driver the SWIM APIs as wrappers of existing HLA functions. Remove any SWIM related reference from HLA files. Update stm8 config files and stlink-dap interface config file. Change-Id: I2bb9f58d52900f6eb4df05f979f7ef11fd439c24 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5530 Tested-by: jenkins
2020-01-27 11:45:10 -06:00
# This new interface driver creates a ST-Link wrapper for ARM-DAP named "dapdirect"
# Old ST-LINK/V1 and ST-LINK/V2 pre version V2J24 don't support "dapdirect"
#
# SWIM transport is natively supported
stlink: add DAP direct driver STLINK-V3 and the new firmware V2J24 for ST-LINK/V2 provide API to directly access the DAP registers. This mode permits to use the native target in cortex_m.c, with no need to override it with the target in hla_target.c. Other advantages wrt HLA are: support for Cortex-A cores, support for SoC multi-core and/or multi AP, support for OpenOCD commands "dap" thus including control of CSW. This obsoletes the existing HLA driver for ST-Link, that should anyway be kept for those cases where it's not possible to update the ST-Link firmware. This commit introduces the minimal implementation for direct DAP access. The implementation is much slower than the HLA because every memory transfer requires several USB packets. Further commits will close the performance gap. The whole ST-Link driver is compiled under BUILD_HLADAPTER, to remove the need to split the driver between the two modes. This has to be reworked, but it's quite invasive! A new interface file stlink-dap.cfg is added and should be used in place of stlink.cfg to enable the DAP mode. Documentation is updated and reports limitation on the maximum AP number that can be accessed by ST-Link for some firmware already tested. Change-Id: I932ffe16bc81d00b1fe489e2944fda13470cce9b Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4904 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2019-01-28 11:53:53 -06:00
#
tcl: fix remaining scripts after rework adapter commands Some script have been added or modified after the patches for reworking the adapter commands were pushed in gerrit. Such scripts use the old command syntax and trigger a "deprecated" warning at runtime. Fix them with the same sed commands used for the other scripts: sed -i 's/^interface /adapter driver /' $(find tcl/ -type f) sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f) Change-Id: I0824d6c506a9af3eb9129b74c02a92b4eb1b100d Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5424 Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Tested-by: jenkins
2020-01-30 11:11:54 -06:00
adapter driver st-link
swim: add new transport Add SWIM and STM8 to documentation and update TODO file. Introduce transport "swim" and command "swim newtap". Switch in swim.c from HLA API to the new SWIM API. Implement in stlink driver the SWIM APIs as wrappers of existing HLA functions. Remove any SWIM related reference from HLA files. Update stm8 config files and stlink-dap interface config file. Change-Id: I2bb9f58d52900f6eb4df05f979f7ef11fd439c24 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5530 Tested-by: jenkins
2020-01-27 11:45:10 -06:00
st-link vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483 0x3752 0x0483 0x3753
stlink: add DAP direct driver STLINK-V3 and the new firmware V2J24 for ST-LINK/V2 provide API to directly access the DAP registers. This mode permits to use the native target in cortex_m.c, with no need to override it with the target in hla_target.c. Other advantages wrt HLA are: support for Cortex-A cores, support for SoC multi-core and/or multi AP, support for OpenOCD commands "dap" thus including control of CSW. This obsoletes the existing HLA driver for ST-Link, that should anyway be kept for those cases where it's not possible to update the ST-Link firmware. This commit introduces the minimal implementation for direct DAP access. The implementation is much slower than the HLA because every memory transfer requires several USB packets. Further commits will close the performance gap. The whole ST-Link driver is compiled under BUILD_HLADAPTER, to remove the need to split the driver between the two modes. This has to be reworked, but it's quite invasive! A new interface file stlink-dap.cfg is added and should be used in place of stlink.cfg to enable the DAP mode. Documentation is updated and reports limitation on the maximum AP number that can be accessed by ST-Link for some firmware already tested. Change-Id: I932ffe16bc81d00b1fe489e2944fda13470cce9b Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4904 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2019-01-28 11:53:53 -06:00
# transport select dapdirect_jtag
# transport select dapdirect_swd
swim: add new transport Add SWIM and STM8 to documentation and update TODO file. Introduce transport "swim" and command "swim newtap". Switch in swim.c from HLA API to the new SWIM API. Implement in stlink driver the SWIM APIs as wrappers of existing HLA functions. Remove any SWIM related reference from HLA files. Update stm8 config files and stlink-dap interface config file. Change-Id: I2bb9f58d52900f6eb4df05f979f7ef11fd439c24 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5530 Tested-by: jenkins
2020-01-27 11:45:10 -06:00
# transport select swim
stlink: add DAP direct driver STLINK-V3 and the new firmware V2J24 for ST-LINK/V2 provide API to directly access the DAP registers. This mode permits to use the native target in cortex_m.c, with no need to override it with the target in hla_target.c. Other advantages wrt HLA are: support for Cortex-A cores, support for SoC multi-core and/or multi AP, support for OpenOCD commands "dap" thus including control of CSW. This obsoletes the existing HLA driver for ST-Link, that should anyway be kept for those cases where it's not possible to update the ST-Link firmware. This commit introduces the minimal implementation for direct DAP access. The implementation is much slower than the HLA because every memory transfer requires several USB packets. Further commits will close the performance gap. The whole ST-Link driver is compiled under BUILD_HLADAPTER, to remove the need to split the driver between the two modes. This has to be reworked, but it's quite invasive! A new interface file stlink-dap.cfg is added and should be used in place of stlink.cfg to enable the DAP mode. Documentation is updated and reports limitation on the maximum AP number that can be accessed by ST-Link for some firmware already tested. Change-Id: I932ffe16bc81d00b1fe489e2944fda13470cce9b Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4904 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2019-01-28 11:53:53 -06:00
# Optionally specify the serial number of usb device
# e.g.
# st-link serial "\xaa\xbc\x6e\x06\x50\x75\xff\x55\x17\x42\x19\x3f"