interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/target/cc2538.cfg

46 lines
1.2 KiB
INI
Raw Normal View History

tcl/target: add CC2538 and CC26xx target files (with cJTAG procedure) Added support for the Cortex-M3 based TI low power RF SoC CC2538 and the CC26xx family. These chips need a start sequence for switching from cJTAG to JTAG before being used with OpenOCD, this is done in the tcl proc ti_cjtag_to_4pin_jtag in the ti-cjtag.cfg config. The configs for CC2538 and CC26xx run the start sequence on post-reset event and set the ICEPick IDCODE in the data register for OpenOCD to read, this is done so that every time OpenOCD resets the device, it will enable JTAG. Change-Id: I7db620211c0e7e03fad59d24fe31d23a9cdcfedc Signed-off-by: Jacob Palsson <jaaacke@gmail.com> Reviewed-on: http://openocd.zylin.com/2232 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-07-29 07:36:40 -05:00
# Config for Texas Instruments low power RF SoC CC2538
# http://www.ti.com/lit/pdf/swru319
flash/nor: update CC26xx/CC13xx support Added fixes found in additional code reviews. Remove inappropriate use of bank_number field and updated documentation to reflect the change. Restored functionality to cc2538.cfg file because previous change removed the cc26xx.cfg file because the flash support changes made it obsolete. Rolled the previous cc26xx.cfg file into cc2538.cfg and updated it to work with other recent changes. Tested using a SmartRF06 Evaluation board with embedded XDS100v3 and external XDs110. Change-Id: Ia19d00cf8055c5c0f1acc53aa23fd06a80fd2ebc Signed-off-by: Edward Fewell <efewell@ti.com> Reviewed-on: http://openocd.zylin.com/4787 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-12-05 16:05:00 -06:00
adapter_khz 100
source [find target/icepick.cfg]
source [find target/ti-cjtag.cfg]
tcl/target: add CC2538 and CC26xx target files (with cJTAG procedure) Added support for the Cortex-M3 based TI low power RF SoC CC2538 and the CC26xx family. These chips need a start sequence for switching from cJTAG to JTAG before being used with OpenOCD, this is done in the tcl proc ti_cjtag_to_4pin_jtag in the ti-cjtag.cfg config. The configs for CC2538 and CC26xx run the start sequence on post-reset event and set the ICEPick IDCODE in the data register for OpenOCD to read, this is done so that every time OpenOCD resets the device, it will enable JTAG. Change-Id: I7db620211c0e7e03fad59d24fe31d23a9cdcfedc Signed-off-by: Jacob Palsson <jaaacke@gmail.com> Reviewed-on: http://openocd.zylin.com/2232 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-07-29 07:36:40 -05:00
if { [info exists CHIPNAME] } {
flash/nor: update CC26xx/CC13xx support Added fixes found in additional code reviews. Remove inappropriate use of bank_number field and updated documentation to reflect the change. Restored functionality to cc2538.cfg file because previous change removed the cc26xx.cfg file because the flash support changes made it obsolete. Rolled the previous cc26xx.cfg file into cc2538.cfg and updated it to work with other recent changes. Tested using a SmartRF06 Evaluation board with embedded XDS100v3 and external XDs110. Change-Id: Ia19d00cf8055c5c0f1acc53aa23fd06a80fd2ebc Signed-off-by: Edward Fewell <efewell@ti.com> Reviewed-on: http://openocd.zylin.com/4787 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-12-05 16:05:00 -06:00
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME cc2538
}
#
# Main DAP
#
if { [info exists DAP_TAPID] } {
set _DAP_TAPID $DAP_TAPID
tcl/target: add CC2538 and CC26xx target files (with cJTAG procedure) Added support for the Cortex-M3 based TI low power RF SoC CC2538 and the CC26xx family. These chips need a start sequence for switching from cJTAG to JTAG before being used with OpenOCD, this is done in the tcl proc ti_cjtag_to_4pin_jtag in the ti-cjtag.cfg config. The configs for CC2538 and CC26xx run the start sequence on post-reset event and set the ICEPick IDCODE in the data register for OpenOCD to read, this is done so that every time OpenOCD resets the device, it will enable JTAG. Change-Id: I7db620211c0e7e03fad59d24fe31d23a9cdcfedc Signed-off-by: Jacob Palsson <jaaacke@gmail.com> Reviewed-on: http://openocd.zylin.com/2232 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-07-29 07:36:40 -05:00
} else {
flash/nor: update CC26xx/CC13xx support Added fixes found in additional code reviews. Remove inappropriate use of bank_number field and updated documentation to reflect the change. Restored functionality to cc2538.cfg file because previous change removed the cc26xx.cfg file because the flash support changes made it obsolete. Rolled the previous cc26xx.cfg file into cc2538.cfg and updated it to work with other recent changes. Tested using a SmartRF06 Evaluation board with embedded XDS100v3 and external XDs110. Change-Id: Ia19d00cf8055c5c0f1acc53aa23fd06a80fd2ebc Signed-off-by: Edward Fewell <efewell@ti.com> Reviewed-on: http://openocd.zylin.com/4787 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-12-05 16:05:00 -06:00
set _DAP_TAPID 0x8B96402F
tcl/target: add CC2538 and CC26xx target files (with cJTAG procedure) Added support for the Cortex-M3 based TI low power RF SoC CC2538 and the CC26xx family. These chips need a start sequence for switching from cJTAG to JTAG before being used with OpenOCD, this is done in the tcl proc ti_cjtag_to_4pin_jtag in the ti-cjtag.cfg config. The configs for CC2538 and CC26xx run the start sequence on post-reset event and set the ICEPick IDCODE in the data register for OpenOCD to read, this is done so that every time OpenOCD resets the device, it will enable JTAG. Change-Id: I7db620211c0e7e03fad59d24fe31d23a9cdcfedc Signed-off-by: Jacob Palsson <jaaacke@gmail.com> Reviewed-on: http://openocd.zylin.com/2232 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-07-29 07:36:40 -05:00
}
flash/nor: update CC26xx/CC13xx support Added fixes found in additional code reviews. Remove inappropriate use of bank_number field and updated documentation to reflect the change. Restored functionality to cc2538.cfg file because previous change removed the cc26xx.cfg file because the flash support changes made it obsolete. Rolled the previous cc26xx.cfg file into cc2538.cfg and updated it to work with other recent changes. Tested using a SmartRF06 Evaluation board with embedded XDS100v3 and external XDs110. Change-Id: Ia19d00cf8055c5c0f1acc53aa23fd06a80fd2ebc Signed-off-by: Edward Fewell <efewell@ti.com> Reviewed-on: http://openocd.zylin.com/4787 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-12-05 16:05:00 -06:00
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_DAP_TAPID -disable
jtag configure $_CHIPNAME.cpu -event tap-enable "icepick_c_tapenable $_CHIPNAME.jrc 0"
tcl/target: add CC2538 and CC26xx target files (with cJTAG procedure) Added support for the Cortex-M3 based TI low power RF SoC CC2538 and the CC26xx family. These chips need a start sequence for switching from cJTAG to JTAG before being used with OpenOCD, this is done in the tcl proc ti_cjtag_to_4pin_jtag in the ti-cjtag.cfg config. The configs for CC2538 and CC26xx run the start sequence on post-reset event and set the ICEPick IDCODE in the data register for OpenOCD to read, this is done so that every time OpenOCD resets the device, it will enable JTAG. Change-Id: I7db620211c0e7e03fad59d24fe31d23a9cdcfedc Signed-off-by: Jacob Palsson <jaaacke@gmail.com> Reviewed-on: http://openocd.zylin.com/2232 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-07-29 07:36:40 -05:00
flash/nor: update CC26xx/CC13xx support Added fixes found in additional code reviews. Remove inappropriate use of bank_number field and updated documentation to reflect the change. Restored functionality to cc2538.cfg file because previous change removed the cc26xx.cfg file because the flash support changes made it obsolete. Rolled the previous cc26xx.cfg file into cc2538.cfg and updated it to work with other recent changes. Tested using a SmartRF06 Evaluation board with embedded XDS100v3 and external XDs110. Change-Id: Ia19d00cf8055c5c0f1acc53aa23fd06a80fd2ebc Signed-off-by: Edward Fewell <efewell@ti.com> Reviewed-on: http://openocd.zylin.com/4787 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-12-05 16:05:00 -06:00
#
# ICEpick-C (JTAG route controller)
#
tcl/target: add CC2538 and CC26xx target files (with cJTAG procedure) Added support for the Cortex-M3 based TI low power RF SoC CC2538 and the CC26xx family. These chips need a start sequence for switching from cJTAG to JTAG before being used with OpenOCD, this is done in the tcl proc ti_cjtag_to_4pin_jtag in the ti-cjtag.cfg config. The configs for CC2538 and CC26xx run the start sequence on post-reset event and set the ICEPick IDCODE in the data register for OpenOCD to read, this is done so that every time OpenOCD resets the device, it will enable JTAG. Change-Id: I7db620211c0e7e03fad59d24fe31d23a9cdcfedc Signed-off-by: Jacob Palsson <jaaacke@gmail.com> Reviewed-on: http://openocd.zylin.com/2232 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-07-29 07:36:40 -05:00
if { [info exists JRC_TAPID] } {
flash/nor: update CC26xx/CC13xx support Added fixes found in additional code reviews. Remove inappropriate use of bank_number field and updated documentation to reflect the change. Restored functionality to cc2538.cfg file because previous change removed the cc26xx.cfg file because the flash support changes made it obsolete. Rolled the previous cc26xx.cfg file into cc2538.cfg and updated it to work with other recent changes. Tested using a SmartRF06 Evaluation board with embedded XDS100v3 and external XDs110. Change-Id: Ia19d00cf8055c5c0f1acc53aa23fd06a80fd2ebc Signed-off-by: Edward Fewell <efewell@ti.com> Reviewed-on: http://openocd.zylin.com/4787 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-12-05 16:05:00 -06:00
set _JRC_TAPID $JRC_TAPID
tcl/target: add CC2538 and CC26xx target files (with cJTAG procedure) Added support for the Cortex-M3 based TI low power RF SoC CC2538 and the CC26xx family. These chips need a start sequence for switching from cJTAG to JTAG before being used with OpenOCD, this is done in the tcl proc ti_cjtag_to_4pin_jtag in the ti-cjtag.cfg config. The configs for CC2538 and CC26xx run the start sequence on post-reset event and set the ICEPick IDCODE in the data register for OpenOCD to read, this is done so that every time OpenOCD resets the device, it will enable JTAG. Change-Id: I7db620211c0e7e03fad59d24fe31d23a9cdcfedc Signed-off-by: Jacob Palsson <jaaacke@gmail.com> Reviewed-on: http://openocd.zylin.com/2232 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-07-29 07:36:40 -05:00
} else {
flash/nor: update CC26xx/CC13xx support Added fixes found in additional code reviews. Remove inappropriate use of bank_number field and updated documentation to reflect the change. Restored functionality to cc2538.cfg file because previous change removed the cc26xx.cfg file because the flash support changes made it obsolete. Rolled the previous cc26xx.cfg file into cc2538.cfg and updated it to work with other recent changes. Tested using a SmartRF06 Evaluation board with embedded XDS100v3 and external XDs110. Change-Id: Ia19d00cf8055c5c0f1acc53aa23fd06a80fd2ebc Signed-off-by: Edward Fewell <efewell@ti.com> Reviewed-on: http://openocd.zylin.com/4787 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-12-05 16:05:00 -06:00
set _JRC_TAPID 0x8B96402F
tcl/target: add CC2538 and CC26xx target files (with cJTAG procedure) Added support for the Cortex-M3 based TI low power RF SoC CC2538 and the CC26xx family. These chips need a start sequence for switching from cJTAG to JTAG before being used with OpenOCD, this is done in the tcl proc ti_cjtag_to_4pin_jtag in the ti-cjtag.cfg config. The configs for CC2538 and CC26xx run the start sequence on post-reset event and set the ICEPick IDCODE in the data register for OpenOCD to read, this is done so that every time OpenOCD resets the device, it will enable JTAG. Change-Id: I7db620211c0e7e03fad59d24fe31d23a9cdcfedc Signed-off-by: Jacob Palsson <jaaacke@gmail.com> Reviewed-on: http://openocd.zylin.com/2232 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-07-29 07:36:40 -05:00
}
flash/nor: update CC26xx/CC13xx support Added fixes found in additional code reviews. Remove inappropriate use of bank_number field and updated documentation to reflect the change. Restored functionality to cc2538.cfg file because previous change removed the cc26xx.cfg file because the flash support changes made it obsolete. Rolled the previous cc26xx.cfg file into cc2538.cfg and updated it to work with other recent changes. Tested using a SmartRF06 Evaluation board with embedded XDS100v3 and external XDs110. Change-Id: Ia19d00cf8055c5c0f1acc53aa23fd06a80fd2ebc Signed-off-by: Edward Fewell <efewell@ti.com> Reviewed-on: http://openocd.zylin.com/4787 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-12-05 16:05:00 -06:00
jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f -expected-id $_JRC_TAPID -ignore-version
# A start sequence is needed to change from cJTAG (Compact JTAG) to
# 4-pin JTAG before talking via JTAG commands
jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.cpu"
jtag configure $_CHIPNAME.jrc -event post-reset "ti_cjtag_to_4pin_jtag $_CHIPNAME.jrc"
tcl/target: add CC2538 and CC26xx target files (with cJTAG procedure) Added support for the Cortex-M3 based TI low power RF SoC CC2538 and the CC26xx family. These chips need a start sequence for switching from cJTAG to JTAG before being used with OpenOCD, this is done in the tcl proc ti_cjtag_to_4pin_jtag in the ti-cjtag.cfg config. The configs for CC2538 and CC26xx run the start sequence on post-reset event and set the ICEPick IDCODE in the data register for OpenOCD to read, this is done so that every time OpenOCD resets the device, it will enable JTAG. Change-Id: I7db620211c0e7e03fad59d24fe31d23a9cdcfedc Signed-off-by: Jacob Palsson <jaaacke@gmail.com> Reviewed-on: http://openocd.zylin.com/2232 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-07-29 07:36:40 -05:00
flash/nor: update CC26xx/CC13xx support Added fixes found in additional code reviews. Remove inappropriate use of bank_number field and updated documentation to reflect the change. Restored functionality to cc2538.cfg file because previous change removed the cc26xx.cfg file because the flash support changes made it obsolete. Rolled the previous cc26xx.cfg file into cc2538.cfg and updated it to work with other recent changes. Tested using a SmartRF06 Evaluation board with embedded XDS100v3 and external XDs110. Change-Id: Ia19d00cf8055c5c0f1acc53aa23fd06a80fd2ebc Signed-off-by: Edward Fewell <efewell@ti.com> Reviewed-on: http://openocd.zylin.com/4787 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-12-05 16:05:00 -06:00
#
# Cortex-M3 target
#
set _TARGETNAME $_CHIPNAME.cpu
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap