riscv-openocd/contrib/99-openocd.rules

135 lines
5.4 KiB
Plaintext
Raw Normal View History

# Copy this file to /etc/udev/rules.d/
ACTION!="add|change", GOTO="openocd_rules_end"
SUBSYSTEM!="usb|tty|hidraw", GOTO="openocd_rules_end"
# Please keep this list sorted by VID:PID
# opendous and estick
ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="204f", MODE="664", GROUP="plugdev"
# Original FT232/FT245 VID:PID
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", MODE="664", GROUP="plugdev"
# Original FT2232 VID:PID
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6010", MODE="664", GROUP="plugdev"
# Original FT4232 VID:PID
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6011", MODE="664", GROUP="plugdev"
# Original FT232H VID:PID
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6014", MODE="664", GROUP="plugdev"
# DISTORTEC JTAG-lock-pick Tiny 2
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8220", MODE="664", GROUP="plugdev"
# TUMPA, TUMPA Lite
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8a98", MODE="664", GROUP="plugdev"
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8a99", MODE="664", GROUP="plugdev"
# XDS100v2
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="a6d0", MODE="664", GROUP="plugdev"
# Xverve Signalyzer Tool (DT-USB-ST), Signalyzer LITE (DT-USB-SLITE)
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bca0", MODE="664", GROUP="plugdev"
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bca1", MODE="664", GROUP="plugdev"
# TI/Luminary Stellaris Evaluation Board FTDI (several)
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bcd9", MODE="664", GROUP="plugdev"
# TI/Luminary Stellaris In-Circuit Debug Interface FTDI (ICDI) Board
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bcda", MODE="664", GROUP="plugdev"
# egnite Turtelizer 2
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bdc8", MODE="664", GROUP="plugdev"
# Section5 ICEbear
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="c140", MODE="664", GROUP="plugdev"
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="c141", MODE="664", GROUP="plugdev"
# Amontec JTAGkey and JTAGkey-tiny
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="cff8", MODE="664", GROUP="plugdev"
# TI ICDI
ATTRS{idVendor}=="0451", ATTRS{idProduct}=="c32a", MODE="664", GROUP="plugdev"
# STLink v1
ATTRS{idVendor}=="0483", ATTRS{idProduct}=="3744", MODE="664", GROUP="plugdev"
# STLink v2
ATTRS{idVendor}=="0483", ATTRS{idProduct}=="3748", MODE="664", GROUP="plugdev"
# STLink v2-1
ATTRS{idVendor}=="0483", ATTRS{idProduct}=="374b", MODE="664", GROUP="plugdev"
# Hilscher NXHX Boards
ATTRS{idVendor}=="0640", ATTRS{idProduct}=="0028", MODE="664", GROUP="plugdev"
# Hitex STR9-comStick
ATTRS{idVendor}=="0640", ATTRS{idProduct}=="002c", MODE="664", GROUP="plugdev"
# Hitex STM32-PerformanceStick
ATTRS{idVendor}=="0640", ATTRS{idProduct}=="002d", MODE="664", GROUP="plugdev"
# Altera USB Blaster
ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6001", MODE="664", GROUP="plugdev"
# Amontec JTAGkey-HiSpeed
ATTRS{idVendor}=="0fbb", ATTRS{idProduct}=="1000", MODE="664", GROUP="plugdev"
Improve J-Link driver and introduce libjaylink. This patch uses libjaylink which is a library to access J-Link devices. As other tools which are not in the scope of OpenOCD also need to access J-Link devices a library is used. A firmware upgrade tool and an advanced configuration tool for J-Link devices are under development. Further versions of libjaylink will support additional features OpenOCD could benefit from. This includes TCP/IP as additional possibility to connect to J-Link devices as well as power tracing and device internal communication. The latter is used to access peripherals on some development boards (e.g EFM32 STK and DVK). Integration of libjaylink is realized with a git submodule like jimtcl. As libjaylink depends on libusb-1.0 only, no additional dependency is introduced for OpenOCD. All low-level JTAG and SWD implementations of the current driver are left untouched and therefore no incompabilities are to be expected. Improvements of this patch: * Support for more USB Product IDs, including those with the new scheme (0x10xx). The corresponding udev rules are also updated. * Device selection with serial number and USB address. * Adaptive clocking is now correctly implemented and only usable for devices with the corresponding capability. * The target power supply can now be switched without the need for changing configuration and power cycling the device. * Device configuration is more restrictive and only allowed if the required capabilities are available. * Device configuration now shows the changes between the current configuration of the device and the values that will be applied. * Device configuration is verified after it is written to the device exactly as the vendor software does. * Connection registration is now handled properly and checks if the maximum number of connections on a device is reached. This is also necessary for devices which are attached via USB to OpenOCD as some device models also support connections on TCP/IP. * Serial Wire Output (SWO) can now be captured. This feature is not documented by SEGGER however it is completely supported by libjaylink. This patch and libjaylink were tested on Ubuntu 14.04 (i386), Debian 7 (amd64), FreeBSD 10.0 (amd64) and Windows XP SP3 (32-bit) with the following device and target configurations: * JTAG: J-Link v8.0, v9.0 and v9.3 with AT91SAM7S256 * SWD: SiLabs EFM32 STK 3700 (EFM32GG990F1024) * SWD: J-Link v8.0, v9.0 and v9.3 with EFM32GG990F1024 * SWD: XMC 2Go (XMC1100) * SWD: XMC1100 Boot Kit (XMC1100) * SWD: IAR Systems / Olimex Eval Board (LPC1343F) * SWD: Nordic Semiconductor nRF51 Dongle (nRF51422) * SWD: SiLabs EZR32 WSTK 6220A (EZR32WG330FG60G) Except for Windows XP all builds are tested with Clang in addition to GCC. This patch and libjaylink are not tested on OSX yet. Change-Id: I8476c57d37c6091c4b892b183da682c548ca1786 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/2598 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-10-20 12:18:38 -05:00
# SEGGER J-Link
ATTRS{idVendor}=="1366", ATTRS{idProduct}=="0101", MODE="664", GROUP="plugdev"
ATTRS{idVendor}=="1366", ATTRS{idProduct}=="0102", MODE="664", GROUP="plugdev"
ATTRS{idVendor}=="1366", ATTRS{idProduct}=="0103", MODE="664", GROUP="plugdev"
ATTRS{idVendor}=="1366", ATTRS{idProduct}=="0104", MODE="664", GROUP="plugdev"
ATTRS{idVendor}=="1366", ATTRS{idProduct}=="0105", MODE="664", GROUP="plugdev"
Improve J-Link driver and introduce libjaylink. This patch uses libjaylink which is a library to access J-Link devices. As other tools which are not in the scope of OpenOCD also need to access J-Link devices a library is used. A firmware upgrade tool and an advanced configuration tool for J-Link devices are under development. Further versions of libjaylink will support additional features OpenOCD could benefit from. This includes TCP/IP as additional possibility to connect to J-Link devices as well as power tracing and device internal communication. The latter is used to access peripherals on some development boards (e.g EFM32 STK and DVK). Integration of libjaylink is realized with a git submodule like jimtcl. As libjaylink depends on libusb-1.0 only, no additional dependency is introduced for OpenOCD. All low-level JTAG and SWD implementations of the current driver are left untouched and therefore no incompabilities are to be expected. Improvements of this patch: * Support for more USB Product IDs, including those with the new scheme (0x10xx). The corresponding udev rules are also updated. * Device selection with serial number and USB address. * Adaptive clocking is now correctly implemented and only usable for devices with the corresponding capability. * The target power supply can now be switched without the need for changing configuration and power cycling the device. * Device configuration is more restrictive and only allowed if the required capabilities are available. * Device configuration now shows the changes between the current configuration of the device and the values that will be applied. * Device configuration is verified after it is written to the device exactly as the vendor software does. * Connection registration is now handled properly and checks if the maximum number of connections on a device is reached. This is also necessary for devices which are attached via USB to OpenOCD as some device models also support connections on TCP/IP. * Serial Wire Output (SWO) can now be captured. This feature is not documented by SEGGER however it is completely supported by libjaylink. This patch and libjaylink were tested on Ubuntu 14.04 (i386), Debian 7 (amd64), FreeBSD 10.0 (amd64) and Windows XP SP3 (32-bit) with the following device and target configurations: * JTAG: J-Link v8.0, v9.0 and v9.3 with AT91SAM7S256 * SWD: SiLabs EFM32 STK 3700 (EFM32GG990F1024) * SWD: J-Link v8.0, v9.0 and v9.3 with EFM32GG990F1024 * SWD: XMC 2Go (XMC1100) * SWD: XMC1100 Boot Kit (XMC1100) * SWD: IAR Systems / Olimex Eval Board (LPC1343F) * SWD: Nordic Semiconductor nRF51 Dongle (nRF51422) * SWD: SiLabs EZR32 WSTK 6220A (EZR32WG330FG60G) Except for Windows XP all builds are tested with Clang in addition to GCC. This patch and libjaylink are not tested on OSX yet. Change-Id: I8476c57d37c6091c4b892b183da682c548ca1786 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/2598 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-10-20 12:18:38 -05:00
ATTRS{idVendor}=="1366", ATTRS{idProduct}=="0107", MODE="664", GROUP="plugdev"
ATTRS{idVendor}=="1366", ATTRS{idProduct}=="0108", MODE="664", GROUP="plugdev"
ATTRS{idVendor}=="1366", ATTRS{idProduct}=="1010", MODE="664", GROUP="plugdev"
ATTRS{idVendor}=="1366", ATTRS{idProduct}=="1011", MODE="664", GROUP="plugdev"
ATTRS{idVendor}=="1366", ATTRS{idProduct}=="1012", MODE="664", GROUP="plugdev"
ATTRS{idVendor}=="1366", ATTRS{idProduct}=="1013", MODE="664", GROUP="plugdev"
ATTRS{idVendor}=="1366", ATTRS{idProduct}=="1014", MODE="664", GROUP="plugdev"
ATTRS{idVendor}=="1366", ATTRS{idProduct}=="1015", MODE="664", GROUP="plugdev"
Improve J-Link driver and introduce libjaylink. This patch uses libjaylink which is a library to access J-Link devices. As other tools which are not in the scope of OpenOCD also need to access J-Link devices a library is used. A firmware upgrade tool and an advanced configuration tool for J-Link devices are under development. Further versions of libjaylink will support additional features OpenOCD could benefit from. This includes TCP/IP as additional possibility to connect to J-Link devices as well as power tracing and device internal communication. The latter is used to access peripherals on some development boards (e.g EFM32 STK and DVK). Integration of libjaylink is realized with a git submodule like jimtcl. As libjaylink depends on libusb-1.0 only, no additional dependency is introduced for OpenOCD. All low-level JTAG and SWD implementations of the current driver are left untouched and therefore no incompabilities are to be expected. Improvements of this patch: * Support for more USB Product IDs, including those with the new scheme (0x10xx). The corresponding udev rules are also updated. * Device selection with serial number and USB address. * Adaptive clocking is now correctly implemented and only usable for devices with the corresponding capability. * The target power supply can now be switched without the need for changing configuration and power cycling the device. * Device configuration is more restrictive and only allowed if the required capabilities are available. * Device configuration now shows the changes between the current configuration of the device and the values that will be applied. * Device configuration is verified after it is written to the device exactly as the vendor software does. * Connection registration is now handled properly and checks if the maximum number of connections on a device is reached. This is also necessary for devices which are attached via USB to OpenOCD as some device models also support connections on TCP/IP. * Serial Wire Output (SWO) can now be captured. This feature is not documented by SEGGER however it is completely supported by libjaylink. This patch and libjaylink were tested on Ubuntu 14.04 (i386), Debian 7 (amd64), FreeBSD 10.0 (amd64) and Windows XP SP3 (32-bit) with the following device and target configurations: * JTAG: J-Link v8.0, v9.0 and v9.3 with AT91SAM7S256 * SWD: SiLabs EFM32 STK 3700 (EFM32GG990F1024) * SWD: J-Link v8.0, v9.0 and v9.3 with EFM32GG990F1024 * SWD: XMC 2Go (XMC1100) * SWD: XMC1100 Boot Kit (XMC1100) * SWD: IAR Systems / Olimex Eval Board (LPC1343F) * SWD: Nordic Semiconductor nRF51 Dongle (nRF51422) * SWD: SiLabs EZR32 WSTK 6220A (EZR32WG330FG60G) Except for Windows XP all builds are tested with Clang in addition to GCC. This patch and libjaylink are not tested on OSX yet. Change-Id: I8476c57d37c6091c4b892b183da682c548ca1786 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/2598 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-10-20 12:18:38 -05:00
ATTRS{idVendor}=="1366", ATTRS{idProduct}=="1016", MODE="664", GROUP="plugdev"
ATTRS{idVendor}=="1366", ATTRS{idProduct}=="1017", MODE="664", GROUP="plugdev"
ATTRS{idVendor}=="1366", ATTRS{idProduct}=="1018", MODE="664", GROUP="plugdev"
# Raisonance RLink
ATTRS{idVendor}=="138e", ATTRS{idProduct}=="9000", MODE="664", GROUP="plugdev"
# Debug Board for Neo1973
ATTRS{idVendor}=="1457", ATTRS{idProduct}=="5118", MODE="664", GROUP="plugdev"
# Olimex ARM-USB-OCD
ATTRS{idVendor}=="15ba", ATTRS{idProduct}=="0003", MODE="664", GROUP="plugdev"
# Olimex ARM-USB-OCD-TINY
ATTRS{idVendor}=="15ba", ATTRS{idProduct}=="0004", MODE="664", GROUP="plugdev"
# Olimex ARM-JTAG-EW
ATTRS{idVendor}=="15ba", ATTRS{idProduct}=="001e", MODE="664", GROUP="plugdev"
# Olimex ARM-USB-OCD-TINY-H
ATTRS{idVendor}=="15ba", ATTRS{idProduct}=="002a", MODE="664", GROUP="plugdev"
# Olimex ARM-USB-OCD-H
ATTRS{idVendor}=="15ba", ATTRS{idProduct}=="002b", MODE="664", GROUP="plugdev"
# USBprog with OpenOCD firmware
ATTRS{idVendor}=="1781", ATTRS{idProduct}=="0c63", MODE="664", GROUP="plugdev"
# TI/Luminary Stellaris In-Circuit Debug Interface (ICDI) Board
ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", MODE="664", GROUP="plugdev"
# Marvell Sheevaplug
ATTRS{idVendor}=="9e88", ATTRS{idProduct}=="9e8f", MODE="664", GROUP="plugdev"
# Keil Software, Inc. ULink
ATTRS{idVendor}=="c251", ATTRS{idProduct}=="2710", MODE="664", GROUP="plugdev"
# CMSIS-DAP compatible adapters
ATTRS{product}=="*CMSIS-DAP*", MODE="664", GROUP="plugdev"
LABEL="openocd_rules_end"