interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/board/ti_tmdx570ls20susb.cfg

17 lines
422 B
INI
Raw Permalink Normal View History

TI TMS570 USB Kit board config Split TMS570 target into LS31/LS21 and LS20/LS10 targets. Board for the TMS570LS20SUSB Kit, which uses the TMS570 Cortex-R4 MCU from TI. Tested attaching. Change-Id: I1a69ac1ed800d0d6b7f9860c19cbd149e3e47620 Signed-off-by: Alex Ray <a@machinaut.com> Reviewed-on: http://openocd.zylin.com/2089 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-04-04 01:14:37 -05:00
# TMS570 Microcontroller USB Kit
# http://www.ti.com/tool/TMDX570LS20SUSB
tcl/board: Add TI TMDX570LS20SUSB board config It is derived from ti_tmdx570ls31usb.cfg, using a different TAP ID. Change-Id: I2d911995c76ea4f75a780cc230d61f4959825809 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2440 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-12-15 09:28:06 -06:00
TI TMS570 USB Kit board config Split TMS570 target into LS31/LS21 and LS20/LS10 targets. Board for the TMS570LS20SUSB Kit, which uses the TMS570 Cortex-R4 MCU from TI. Tested attaching. Change-Id: I1a69ac1ed800d0d6b7f9860c19cbd149e3e47620 Signed-off-by: Alex Ray <a@machinaut.com> Reviewed-on: http://openocd.zylin.com/2089 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-04-04 01:14:37 -05:00
# Board uses a FT2232H to emulate an XDS100v2 JTAG debugger
# TODO: board also supports an SCI UART on the 2232's B Bus
tcl/board: Add TI TMDX570LS20SUSB board config It is derived from ti_tmdx570ls31usb.cfg, using a different TAP ID. Change-Id: I2d911995c76ea4f75a780cc230d61f4959825809 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2440 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-12-15 09:28:06 -06:00
source [find interface/ftdi/xds100v2.cfg]
TI TMS570 USB Kit board config Split TMS570 target into LS31/LS21 and LS20/LS10 targets. Board for the TMS570LS20SUSB Kit, which uses the TMS570 Cortex-R4 MCU from TI. Tested attaching. Change-Id: I1a69ac1ed800d0d6b7f9860c19cbd149e3e47620 Signed-off-by: Alex Ray <a@machinaut.com> Reviewed-on: http://openocd.zylin.com/2089 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-04-04 01:14:37 -05:00
# Processor is TMS570LS20216
source [find target/ti_tms570ls20xxx.cfg]
tcl/board: Add TI TMDX570LS20SUSB board config It is derived from ti_tmdx570ls31usb.cfg, using a different TAP ID. Change-Id: I2d911995c76ea4f75a780cc230d61f4959825809 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2440 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-12-15 09:28:06 -06:00
reset_config trst_only
TI TMS570 USB Kit board config Split TMS570 target into LS31/LS21 and LS20/LS10 targets. Board for the TMS570LS20SUSB Kit, which uses the TMS570 Cortex-R4 MCU from TI. Tested attaching. Change-Id: I1a69ac1ed800d0d6b7f9860c19cbd149e3e47620 Signed-off-by: Alex Ray <a@machinaut.com> Reviewed-on: http://openocd.zylin.com/2089 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-04-04 01:14:37 -05:00
# xds100v2 config says add this to the end
init
ftdi_set_signal PWR_RST 1
jtag arp_init