riscv-openocd/tcl/target/ngultra.cfg

52 lines
1.8 KiB
INI
Raw Permalink Normal View History

# SPDX-License-Identifier: BSD-3-Clause
# Copyright (C) 2022 by NanoXplore, France - all rights reserved
#
# configuration file for NG-Ultra SoC from NanoXplore.
# NG-Ultra is a quad-core Cortex-R52 SoC + an FPGA.
#
transport select jtag
adapter speed 10000
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME NGULTRA
}
if { [info exists CHIPCORES] } {
set _cores $CHIPCORES
} else {
set _cores 4
}
set DBGBASE {0x88210000 0x88310000 0x88410000 0x88510000}
set CTIBASE {0x88220000 0x88320000 0x88420000 0x88520000}
# Coresight access to the SoC
jtag newtap $_CHIPNAME.coresight cpu -irlen 4 -expected-id 0x6BA00477
# Misc TAP devices
jtag newtap $_CHIPNAME.soc cpu -irlen 7 -expected-id 0xFAAA0555
jtag newtap $_CHIPNAME.pmb unknown1 -irlen 5 -expected-id 0xBA20A005
jtag newtap $_CHIPNAME.fpga fpga -irlen 4 -ignore-version -ignore-bypass
# Create the Coresight DAP
dap create $_CHIPNAME.coresight.dap -chain-position $_CHIPNAME.coresight.cpu
for { set _core 0 } { $_core < $_cores } { incr _core } {
cti create cti.$_core -dap $_CHIPNAME.coresight.dap -ap-num 0 \
-baseaddr [lindex $CTIBASE $_core]
# Cores are armv8-r but works with aarch64 (since armv8-r not directly supported by openocd yet).
if { $_core == 0} {
target create core.$_core aarch64 -dap $_CHIPNAME.coresight.dap \
-ap-num 0 -dbgbase [lindex $DBGBASE $_core] -cti cti.$_core
} else {
target create core.$_core aarch64 -dap $_CHIPNAME.coresight.dap \
-ap-num 0 -dbgbase [lindex $DBGBASE $_core] -cti cti.$_core -defer-examine
}
}
# Create direct APB and AXI interfaces
target create APB mem_ap -dap $_CHIPNAME.coresight.dap -ap-num 0
target create AXI mem_ap -dap $_CHIPNAME.coresight.dap -ap-num 1