interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/board/ti_tmdx570ls20susb.cfg

19 lines
467 B
INI
Raw Permalink Normal View History

tcl/board: add SPDX tag For historical reasons, no license information was added to the tcl files. This makes trivial adding the SPDX tag through script: fgrep -rL SPDX tcl/board | while read a;do \ sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n }' $a;done With no specific license information from the author, let's extend the OpenOCD project license GPL-2.0-or-later to the files. Change-Id: Ibcf7da62e842aafd036a78db9ea2b9f11f79af16 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7028 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2022-06-12 16:48:05 -05:00
# SPDX-License-Identifier: GPL-2.0-or-later
TI TMS570 USB Kit board config Split TMS570 target into LS31/LS21 and LS20/LS10 targets. Board for the TMS570LS20SUSB Kit, which uses the TMS570 Cortex-R4 MCU from TI. Tested attaching. Change-Id: I1a69ac1ed800d0d6b7f9860c19cbd149e3e47620 Signed-off-by: Alex Ray <a@machinaut.com> Reviewed-on: http://openocd.zylin.com/2089 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-04-04 01:14:37 -05:00
# TMS570 Microcontroller USB Kit
# http://www.ti.com/tool/TMDX570LS20SUSB
tcl/board: Add TI TMDX570LS20SUSB board config It is derived from ti_tmdx570ls31usb.cfg, using a different TAP ID. Change-Id: I2d911995c76ea4f75a780cc230d61f4959825809 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2440 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-12-15 09:28:06 -06:00
TI TMS570 USB Kit board config Split TMS570 target into LS31/LS21 and LS20/LS10 targets. Board for the TMS570LS20SUSB Kit, which uses the TMS570 Cortex-R4 MCU from TI. Tested attaching. Change-Id: I1a69ac1ed800d0d6b7f9860c19cbd149e3e47620 Signed-off-by: Alex Ray <a@machinaut.com> Reviewed-on: http://openocd.zylin.com/2089 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-04-04 01:14:37 -05:00
# Board uses a FT2232H to emulate an XDS100v2 JTAG debugger
# TODO: board also supports an SCI UART on the 2232's B Bus
tcl/board: Add TI TMDX570LS20SUSB board config It is derived from ti_tmdx570ls31usb.cfg, using a different TAP ID. Change-Id: I2d911995c76ea4f75a780cc230d61f4959825809 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2440 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-12-15 09:28:06 -06:00
source [find interface/ftdi/xds100v2.cfg]
TI TMS570 USB Kit board config Split TMS570 target into LS31/LS21 and LS20/LS10 targets. Board for the TMS570LS20SUSB Kit, which uses the TMS570 Cortex-R4 MCU from TI. Tested attaching. Change-Id: I1a69ac1ed800d0d6b7f9860c19cbd149e3e47620 Signed-off-by: Alex Ray <a@machinaut.com> Reviewed-on: http://openocd.zylin.com/2089 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-04-04 01:14:37 -05:00
# Processor is TMS570LS20216
source [find target/ti_tms570ls20xxx.cfg]
tcl/board: Add TI TMDX570LS20SUSB board config It is derived from ti_tmdx570ls31usb.cfg, using a different TAP ID. Change-Id: I2d911995c76ea4f75a780cc230d61f4959825809 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2440 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-12-15 09:28:06 -06:00
reset_config trst_only
TI TMS570 USB Kit board config Split TMS570 target into LS31/LS21 and LS20/LS10 targets. Board for the TMS570LS20SUSB Kit, which uses the TMS570 Cortex-R4 MCU from TI. Tested attaching. Change-Id: I1a69ac1ed800d0d6b7f9860c19cbd149e3e47620 Signed-off-by: Alex Ray <a@machinaut.com> Reviewed-on: http://openocd.zylin.com/2089 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-04-04 01:14:37 -05:00
# xds100v2 config says add this to the end
init
tcl: Adapt config files to new ftdi command syntax The patch was created automatically using the following script: %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF ftdi_device_desc ftdi device_desc ftdi_serial ftdi serial ftdi_channel ftdi channel ftdi_layout_init ftdi layout_init ftdi_layout_signal ftdi layout_signal ftdi_set_signal ftdi set_signal ftdi_get_signal ftdi get_signal ftdi_vid_pid ftdi vid_pid ftdi_tdo_sample_edge ftdi tdo_sample_edge EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6333 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-06-23 13:54:49 -05:00
ftdi set_signal PWR_RST 1
TI TMS570 USB Kit board config Split TMS570 target into LS31/LS21 and LS20/LS10 targets. Board for the TMS570LS20SUSB Kit, which uses the TMS570 Cortex-R4 MCU from TI. Tested attaching. Change-Id: I1a69ac1ed800d0d6b7f9860c19cbd149e3e47620 Signed-off-by: Alex Ray <a@machinaut.com> Reviewed-on: http://openocd.zylin.com/2089 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-04-04 01:14:37 -05:00
jtag arp_init