interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/board/stm32mp15x_dk2.cfg

14 lines
312 B
INI
Raw Permalink Normal View History

tcl/board: add SPDX tag For historical reasons, no license information was added to the tcl files. This makes trivial adding the SPDX tag through script: fgrep -rL SPDX tcl/board | while read a;do \ sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n }' $a;done With no specific license information from the author, let's extend the OpenOCD project license GPL-2.0-or-later to the files. Change-Id: Ibcf7da62e842aafd036a78db9ea2b9f11f79af16 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7028 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2022-06-12 16:48:05 -05:00
# SPDX-License-Identifier: GPL-2.0-or-later
tcl: stm32mp15x: add target and board config files The stm32mp15x has one or two Cortex-A7 (depending on the P/N) and one Cortex-M4. The second core is automatically detected by the target script. In "engineering boot" all the cores are accessible. In "production boot" the Cortex-M4 is kept in reset state after power-on or NRST. The board DK2 includes a ST-Link/V2, but only SWD is connected. Change-Id: Ib6ebefcc696b1716e0f98694cadf0b04fd7d11d6 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5454 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-02-14 09:49:45 -06:00
# board MB1272B
# http://www.st.com/en/evaluation-tools/stm32mp157a-dk1.html
# http://www.st.com/en/evaluation-tools/stm32mp157c-dk2.html
stlink: deprecate HLA support The STLink API that supports dap-direct is available from STLink firmware v2j24, published in early 2015. We can reasonably expect that any old STLink still in use today has got at least one firmware update during the last 10 years. Most of the board files in upstream OpenOCD still use the STLink in HLA mode. This limits the test coverage of the dap-direct code, which was introduced in OpenOCD v0.11.0. - Rename interface/stlink.cfg as interface/stlink-hla.cfg to still provide support for HLA, adding a deprecated message. - Rename interface/stlink-dap.cfg as interface/stlink.cfg to make dap-direct the default trasport. - Add a redirect file interface/stlink-dap.cfg for users that have out-of-tree custom board files. - Update all the board files to the new setup. - Remove STLink HLA mentions from the documentation, while adding a reference to interface/stlink-hla.cfg Checkpatch-ignore: LONG_LINE Change-Id: I99366bb03cd3b83f8f408514e657f30e59813063 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/8523 Tested-by: jenkins Reviewed-by: Andrzej Sierżęga <asier70@gmail.com>
2024-10-12 04:48:05 -05:00
source [find interface/stlink.cfg]
tcl: stm32mp15x: add target and board config files The stm32mp15x has one or two Cortex-A7 (depending on the P/N) and one Cortex-M4. The second core is automatically detected by the target script. In "engineering boot" all the cores are accessible. In "production boot" the Cortex-M4 is kept in reset state after power-on or NRST. The board DK2 includes a ST-Link/V2, but only SWD is connected. Change-Id: Ib6ebefcc696b1716e0f98694cadf0b04fd7d11d6 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5454 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-02-14 09:49:45 -06:00
transport select dapdirect_swd
source [find target/stm32mp15x.cfg]
reset_config srst_only