interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/board/stm32h7x3i_eval.cfg

16 lines
487 B
INI
Raw Permalink Normal View History

tcl/board: add SPDX tag For historical reasons, no license information was added to the tcl files. This makes trivial adding the SPDX tag through script: fgrep -rL SPDX tcl/board | while read a;do \ sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n }' $a;done With no specific license information from the author, let's extend the OpenOCD project license GPL-2.0-or-later to the files. Change-Id: Ibcf7da62e842aafd036a78db9ea2b9f11f79af16 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7028 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2022-06-12 16:48:05 -05:00
# SPDX-License-Identifier: GPL-2.0-or-later
Add STM32H7 config files Add 2 target files: -stm32h7x.cfg -stm32h7x_dual_bank.cfg Add 2 config files for: -STM32H743zi-nucleo bord -STM32H743i and STM32H753i eval boards. Change-Id: I2aae2c5acff4f3ff8e1bf232fda5a11a87f71703 Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Reviewed-on: http://openocd.zylin.com/4182 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2017-11-13 10:00:58 -06:00
# STM32H7[4|5]3I-EVAL: this is for the H7 eval boards.
# This is an ST EVAL-H743XI board with single STM32H743XI chip.
# http://www.st.com/en/evaluation-tools/stm32h743i-eval.html
# This is an ST EVAL-H753XI board with single STM32H753XI chip.
# http://www.st.com/en/evaluation-tools/stm32h753i-eval.html
tcl/board: update all uses of interface/stlink-v2-1 to interface/stlink Change-Id: I5e27e84d022f73101376e8b4a1bdc65f58fd348a Signed-off-by: Cody P Schafer <openocd@codyps.com> Reviewed-on: http://openocd.zylin.com/4456 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-03-07 10:29:45 -06:00
source [find interface/stlink.cfg]
Add STM32H7 config files Add 2 target files: -stm32h7x.cfg -stm32h7x_dual_bank.cfg Add 2 config files for: -STM32H743zi-nucleo bord -STM32H743i and STM32H753i eval boards. Change-Id: I2aae2c5acff4f3ff8e1bf232fda5a11a87f71703 Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Reviewed-on: http://openocd.zylin.com/4182 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2017-11-13 10:00:58 -06:00
stlink: deprecate HLA support The STLink API that supports dap-direct is available from STLink firmware v2j24, published in early 2015. We can reasonably expect that any old STLink still in use today has got at least one firmware update during the last 10 years. Most of the board files in upstream OpenOCD still use the STLink in HLA mode. This limits the test coverage of the dap-direct code, which was introduced in OpenOCD v0.11.0. - Rename interface/stlink.cfg as interface/stlink-hla.cfg to still provide support for HLA, adding a deprecated message. - Rename interface/stlink-dap.cfg as interface/stlink.cfg to make dap-direct the default trasport. - Add a redirect file interface/stlink-dap.cfg for users that have out-of-tree custom board files. - Update all the board files to the new setup. - Remove STLink HLA mentions from the documentation, while adding a reference to interface/stlink-hla.cfg Checkpatch-ignore: LONG_LINE Change-Id: I99366bb03cd3b83f8f408514e657f30e59813063 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/8523 Tested-by: jenkins Reviewed-by: Andrzej Sierżęga <asier70@gmail.com>
2024-10-12 04:48:05 -05:00
transport select dapdirect_swd
Add STM32H7 config files Add 2 target files: -stm32h7x.cfg -stm32h7x_dual_bank.cfg Add 2 config files for: -STM32H743zi-nucleo bord -STM32H743i and STM32H753i eval boards. Change-Id: I2aae2c5acff4f3ff8e1bf232fda5a11a87f71703 Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Reviewed-on: http://openocd.zylin.com/4182 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2017-11-13 10:00:58 -06:00
source [find target/stm32h7x_dual_bank.cfg]
reset_config srst_only