interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/board/stm3220g_eval_stlink.cfg

22 lines
464 B
INI
Raw Permalink Normal View History

tcl/board: add SPDX tag For historical reasons, no license information was added to the tcl files. This makes trivial adding the SPDX tag through script: fgrep -rL SPDX tcl/board | while read a;do \ sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n }' $a;done With no specific license information from the author, let's extend the OpenOCD project license GPL-2.0-or-later to the files. Change-Id: Ibcf7da62e842aafd036a78db9ea2b9f11f79af16 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7028 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2022-06-12 16:48:05 -05:00
# SPDX-License-Identifier: GPL-2.0-or-later
cfg: add support for STM3220G-EVAL onboard STLINK Change-Id: Icd7a1baf6f2623e5b57d29c4602a2762af730936 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/541 Tested-by: jenkins
2012-03-26 11:22:27 -05:00
# STM3220G-EVAL: This is an STM32F2 eval board with a single STM32F207IGH6
# (128KB) chip.
# http://www.st.com/internet/evalboard/product/250374.jsp
#
# This is for using the onboard STLINK/V2
jtag: drivers: stlink: handle all versions with single config Extend HLA interface to allow multiple VID/PID pairs and use it to autodetect the connected stlink version. Change-Id: I35cd895b2260e23cf0e8fcb1fc11a78c2b99c69b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3961 Tested-by: jenkins Reviewed-by: Karl Palsson <karlp@tweak.net.au> Reviewed-by: Andreas Bolsch <hyphen0break@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2017-01-26 14:41:40 -06:00
source [find interface/stlink.cfg]
cfg: add support for STM3220G-EVAL onboard STLINK Change-Id: Icd7a1baf6f2623e5b57d29c4602a2762af730936 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/541 Tested-by: jenkins
2012-03-26 11:22:27 -05:00
stlink: deprecate HLA support The STLink API that supports dap-direct is available from STLink firmware v2j24, published in early 2015. We can reasonably expect that any old STLink still in use today has got at least one firmware update during the last 10 years. Most of the board files in upstream OpenOCD still use the STLink in HLA mode. This limits the test coverage of the dap-direct code, which was introduced in OpenOCD v0.11.0. - Rename interface/stlink.cfg as interface/stlink-hla.cfg to still provide support for HLA, adding a deprecated message. - Rename interface/stlink-dap.cfg as interface/stlink.cfg to make dap-direct the default trasport. - Add a redirect file interface/stlink-dap.cfg for users that have out-of-tree custom board files. - Update all the board files to the new setup. - Remove STLink HLA mentions from the documentation, while adding a reference to interface/stlink-hla.cfg Checkpatch-ignore: LONG_LINE Change-Id: I99366bb03cd3b83f8f408514e657f30e59813063 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/8523 Tested-by: jenkins Reviewed-by: Andrzej Sierżęga <asier70@gmail.com>
2024-10-12 04:48:05 -05:00
transport select dapdirect_swd
Allow transports to override the selected target (hla configs unification) This should allow to share common configs for both regular access and high-level adapters. Use the newly-added functionality in stlink and icdi drivers, amend the configs accordingly. Runtime-tested with a TI tm4c123g board. Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad Signed-off-by: Paul Fertser <fercerpav@gmail.com> [gus@projectgus.com: context-specific deprecation warnings] Signed-off-by: Angus Gratton <gus@projectgus.com> [andrew.smirnov@gmail.com: additional nrf51.cfg mods] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Reviewed-on: http://openocd.zylin.com/1664 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-28 05:23:15 -05:00
cfg: add support for STM3220G-EVAL onboard STLINK Change-Id: Icd7a1baf6f2623e5b57d29c4602a2762af730936 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/541 Tested-by: jenkins
2012-03-26 11:22:27 -05:00
# increase working area to 128KB
set WORKAREASIZE 0x20000
# chip name
set CHIPNAME STM32F207IGH6
Allow transports to override the selected target (hla configs unification) This should allow to share common configs for both regular access and high-level adapters. Use the newly-added functionality in stlink and icdi drivers, amend the configs accordingly. Runtime-tested with a TI tm4c123g board. Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad Signed-off-by: Paul Fertser <fercerpav@gmail.com> [gus@projectgus.com: context-specific deprecation warnings] Signed-off-by: Angus Gratton <gus@projectgus.com> [andrew.smirnov@gmail.com: additional nrf51.cfg mods] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Reviewed-on: http://openocd.zylin.com/1664 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-28 05:23:15 -05:00
source [find target/stm32f2x.cfg]
Use hardware reset and connect under reset on boards with ST-LINK/V2, as now it is supported. Change-Id: Id3b2ca9a2270974a5f453323f9057ecece400c94 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/609 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-01 12:47:28 -05:00
cfg: add srst_nogate to the supported targets, remove from board configs It depends on the particular target whether it can work with SRST asserted or not, so this belongs to the target config rather than the board config. Also, this allows for simple openocd -f myboard.cfg -c "reset_config connect_assert_srst" command to be used whenever a user feels a need to connect to an unresponsive target. Change-Id: I3d8da9ae47088fc0c75a20bfdd20074be1014de0 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2459 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-10 04:19:26 -06:00
reset_config srst_only