riscv-openocd/tcl/board/renesas_silk.cfg

# SPDX-License-Identifier: GPL-2.0-or-later

# Renesas R-Car E2 Evaluation Board

set SOC E2
source [find target/renesas_rcar_gen2.cfg]
tcl/board: add SPDX tag For historical reasons, no license information was added to the tcl files. This makes trivial adding the SPDX tag through script: fgrep -rL SPDX tcl/board \| while read a;do \ sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n }' $a;done With no specific license information from the author, let's extend the OpenOCD project license GPL-2.0-or-later to the files. Change-Id: Ibcf7da62e842aafd036a78db9ea2b9f11f79af16 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7028 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> 2022-06-12 16:48:05 -05:00			`# SPDX-License-Identifier: GPL-2.0-or-later`

tcl/board: Add Renesas R-Car R8A7794 E2 Silk board Add configuration for the Renesas R-Car R8A7794 E2 based Silk evaluation board. Change-Id: I504b5630b1a2791ed6967c6c2af8851ceef9723f Signed-off-by: Marek Vasut <marek.vasut@gmail.com> --- NOTE: This requires SW7[1] in position 1 (default is 0) Reviewed-on: http://openocd.zylin.com/4532 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> 2018-04-21 08:59:23 -05:00			`# Renesas R-Car E2 Evaluation Board`

tcl/target: Switch Renesas R-Car Gen2 boards to new config Switch Renesas R-Car Gen2 boards which are currently supported from the old ad-hoc SoC configuration to the new unified configuration. Change-Id: I8a67bceb3ae92d840ae4dbac20868c75e83f7d58 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/5398 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> 2020-01-07 15:54:32 -06:00			`set SOC E2`
			`source [find target/renesas_rcar_gen2.cfg]`