interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/board/omap2420_h4.cfg

15 lines
467 B
INI
Raw Permalink Normal View History

tcl/board: add SPDX tag For historical reasons, no license information was added to the tcl files. This makes trivial adding the SPDX tag through script: fgrep -rL SPDX tcl/board | while read a;do \ sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n }' $a;done With no specific license information from the author, let's extend the OpenOCD project license GPL-2.0-or-later to the files. Change-Id: Ibcf7da62e842aafd036a78db9ea2b9f11f79af16 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7028 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2022-06-12 16:48:05 -05:00
# SPDX-License-Identifier: GPL-2.0-or-later
David Brownell <david-b@pacbell.net>: Add another board ... OMAP2420 "H4" board. This won't be very widely used with OpenOCD, but with mainline support in both U-Boot and Linux it at least makes for a more complete set (and another testcase). This is incomplete support in several respects. The ARM11 support is not very deep yet; most registers aren't available, and the ETM can't be hooked up. Plus, there's no script for OMAP-specific stuff like setting up the SDRAM controller. Eventually the same NAND controller driver should work with OMAP2 and OMAP3. git-svn-id: svn://svn.berlios.de/openocd/trunk@2242 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-15 18:54:09 -05:00
# OMAP2420 SDP board ("H4")
source [find target/omap2420.cfg]
# NOTE: this assumes you're *NOT* using a TI-14 connector.
reset_config trst_and_srst separate
# Board configs can vary a *LOT* ... parts, jumpers, etc.
# This GP board boots from cs0 using NOR (2x32M), and also
# has 64M NAND on cs6.
board configs -- unique names for flash chips Don't give the same names to both flash chips on two OMAP boards. For OSK, enable DCC downloads (removing a warning). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-20 12:46:53 -06:00
flash bank h4.u10 cfi 0x04000000 0x02000000 2 2 $_TARGETNAME
flash bank h4.u11 cfi 0x06000000 0x02000000 2 2 $_TARGETNAME