riscv-openocd/tcl/board/nxp_frdm-ls1012a.cfg

# SPDX-License-Identifier: GPL-2.0-or-later

#
# NXP FRDM-LS1012A (Freedom)
#

#
# NXP Kinetis K20
#
source [find interface/cmsis-dap.cfg]
transport select jtag

# Also offers a 10-pin 0.05" CoreSight JTAG connector.

source [find target/ls1012a.cfg]

reset_config srst_only
tcl/board: add SPDX tag For historical reasons, no license information was added to the tcl files. This makes trivial adding the SPDX tag through script: fgrep -rL SPDX tcl/board \| while read a;do \ sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n }' $a;done With no specific license information from the author, let's extend the OpenOCD project license GPL-2.0-or-later to the files. Change-Id: Ibcf7da62e842aafd036a78db9ea2b9f11f79af16 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7028 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> 2022-06-12 16:48:05 -05:00			`# SPDX-License-Identifier: GPL-2.0-or-later`

tcl: board: Add NXP Freedom FRDM-LS1012A config An update for the K20 CMSIS-DAP firmware can be found here: https://community.nxp.com/thread/387080?commentID=840141#comment-840141 Change-Id: I149d7f8610aa56daf1aeb95f14ee1bf88f7cb647 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/4595 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> 2018-07-08 17:37:51 -05:00			`#`
			`# NXP FRDM-LS1012A (Freedom)`
			`#`

			`#`
			`# NXP Kinetis K20`
			`#`
			`source [find interface/cmsis-dap.cfg]`
			`transport select jtag`

			`# Also offers a 10-pin 0.05" CoreSight JTAG connector.`

			`source [find target/ls1012a.cfg]`

			`reset_config srst_only`