interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/target/max32620.cfg

29 lines
1.1 KiB
INI
Raw Permalink Normal View History

max32xxx: Support for MAX32XXX devices. Adding flash programming support for Maxim Integrated MAX32XXX devices. Change-Id: I5b0f57a885f9d813240e4bc2d9f765b743e1cfc3 Signed-off-by: Kevin Gillespie <kgills@gmail.com> Reviewed-on: http://openocd.zylin.com/3543 Tested-by: jenkins Reviewed-by: Ismail H. KOSE <ihkose@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-07-14 13:00:23 -05:00
# Maxim Integrated MAX32620 OpenOCD target configuration file
# www.maximintegrated.com
# adapter speed
tcl: replace the deprecated commands with "adapter ..." Avoid annoying "deprecated" messages while running the scripts distributed with OpenOCD code. Change automatically created with commands sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f) Minor indentation issue fixed manually in tcl/board/at91sam9g20-ek.cfg tcl/target/at91sam9260_ext_RAM_ext_flash.cfg Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5284 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2019-08-23 08:51:00 -05:00
adapter speed 4000
max32xxx: Support for MAX32XXX devices. Adding flash programming support for Maxim Integrated MAX32XXX devices. Change-Id: I5b0f57a885f9d813240e4bc2d9f765b743e1cfc3 Signed-off-by: Kevin Gillespie <kgills@gmail.com> Reviewed-on: http://openocd.zylin.com/3543 Tested-by: jenkins Reviewed-by: Ismail H. KOSE <ihkose@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-07-14 13:00:23 -05:00
# reset pin configuration
reset_config srst_only
if {[using_jtag]} {
jtag newtap max32620 cpu -irlen 4 -irmask 0xf -expected-id 0x4ba00477 -ignore-version
jtag newtap maxtest tap -irlen 4 -irmask 0xf -ircapture 0x1 -ignore-version
} else {
swd newdap max32620 cpu -irlen 4 -irmask 0xf -expected-id 0x2ba01477 -ignore-version
}
# target configuration
target create max32620.cpu cortex_m -chain-position max32620.cpu
max32620.cpu configure -work-area-phys 0x20005000 -work-area-size 0x2000
# Config Command: flash bank name driver base size chip_width bus_width target [driver_options]
# flash bank <name> max32xxx <base> <size> 0 0 <target> <flc base> <sector> <clk> <burst>
# max32620 flash base address 0x00000000
# max32620 flash size 0x200000 (2MB)
# max32620 FLC base address 0x40002000
# max32620 sector (page) size 0x2000 (8kB)
# max32620 clock speed 96 (MHz)
flash bank max32620.flash max32xxx 0x00000000 0x200000 0 0 max32620.cpu 0x40002000 0x2000 96