interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/target/lpc4370.cfg

90 lines
2.1 KiB
INI
Raw Permalink Normal View History

tcl/target: add SPDX tag For historical reasons, no license information was added to the tcl files. This makes trivial adding the SPDX tag through script: fgrep -rL SPDX tcl/ target| while read a;do \ sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n }' $a;done With no specific license information from the author, let's extend the OpenOCD project license GPL-2.0-or-later to the files. Change-Id: I7b2610300b24cccd07bfa6fb5f1266970d5d3a1b Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7027 Tested-by: jenkins
2022-06-12 16:42:27 -05:00
# SPDX-License-Identifier: GPL-2.0-or-later
tcl/target: Add configuration for NXP LPC4370 processor New configuration for NXP LPC4370 which consists of a Cortex-M4 and two Cortex-M0 cores. Change-Id: I9918e3ff33218a14a99e4bbab9dce2e7b45b4d96 Signed-off-by: Jim Norris <u17263@att.net> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2124 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-05-02 21:04:45 -05:00
#
# NXP LPC4370 - 1x ARM Cortex-M4 + 2x ARM Cortex-M0 @ up to 204 MHz each
#
tcl: replace the deprecated commands with "adapter ..." Avoid annoying "deprecated" messages while running the scripts distributed with OpenOCD code. Change automatically created with commands sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f) Minor indentation issue fixed manually in tcl/board/at91sam9g20-ek.cfg tcl/target/at91sam9260_ext_RAM_ext_flash.cfg Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5284 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2019-08-23 08:51:00 -05:00
adapter speed 500
tcl/target: Add configuration for NXP LPC4370 processor New configuration for NXP LPC4370 which consists of a Cortex-M4 and two Cortex-M0 cores. Change-Id: I9918e3ff33218a14a99e4bbab9dce2e7b45b4d96 Signed-off-by: Jim Norris <u17263@att.net> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2124 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-05-02 21:04:45 -05:00
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME lpc4370
}
#
# M4 JTAG mode TAP
#
if { [info exists M4_JTAG_TAPID] } {
set _M4_JTAG_TAPID $M4_JTAG_TAPID
} else {
set _M4_JTAG_TAPID 0x4ba00477
}
#
# M4 SWD mode TAP
#
if { [info exists M4_SWD_TAPID] } {
set _M4_SWD_TAPID $M4_SWD_TAPID
} else {
set _M4_SWD_TAPID 0x2ba01477
}
source [find target/swj-dp.tcl]
if { [using_jtag] } {
set _M4_TAPID $_M4_JTAG_TAPID
} else {
set _M4_TAPID $_M4_SWD_TAPID
}
#
# M0 TAP
#
if { [info exists M0_JTAG_TAPID] } {
set _M0_JTAG_TAPID $M0_JTAG_TAPID
} else {
set _M0_JTAG_TAPID 0x0ba01477
}
swj_newdap $_CHIPNAME m4 -irlen 4 -ircapture 0x1 -irmask 0xf \
-expected-id $_M4_TAPID
target: restructure dap support - add 'dap create' command to create dap instances - move all dap subcmmand into the dap instance commands - keep 'dap info' for convenience - change all armv7 and armv8 targets to take a dap instance instead of a jtag chain position - restructure tap/dap/target relations, jtag tap no longer references the dap, daps are now independently created and initialized. - clean up swd connect - re-initialize DAP also on JTAG errors (e.g. after reset, power cycle) - update documentation - update target files Change-Id: I322cf3969b5407c25d1d3962f9d9b9bc1df067d9 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4468 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-03-23 15:17:29 -05:00
dap create $_CHIPNAME.m4.dap -chain-position $_CHIPNAME.m4
target create $_CHIPNAME.m4 cortex_m -dap $_CHIPNAME.m4.dap
tcl/target: Add configuration for NXP LPC4370 processor New configuration for NXP LPC4370 which consists of a Cortex-M4 and two Cortex-M0 cores. Change-Id: I9918e3ff33218a14a99e4bbab9dce2e7b45b4d96 Signed-off-by: Jim Norris <u17263@att.net> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2124 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-05-02 21:04:45 -05:00
# LPC4370 has 96+32 KB contiguous SRAM
if { [info exists WORKAREASIZE] } {
set _WORKAREASIZE $WORKAREASIZE
} else {
set _WORKAREASIZE 0x20000
}
$_CHIPNAME.m4 configure -work-area-phys 0x10000000 \
-work-area-size $_WORKAREASIZE -work-area-backup 0
if { [using_jtag] } {
jtag newtap $_CHIPNAME m0app -irlen 4 -ircapture 0x1 -irmask 0xf \
-expected-id $_M0_JTAG_TAPID
jtag newtap $_CHIPNAME m0sub -irlen 4 -ircapture 0x1 -irmask 0xf \
-expected-id $_M0_JTAG_TAPID
target: restructure dap support - add 'dap create' command to create dap instances - move all dap subcmmand into the dap instance commands - keep 'dap info' for convenience - change all armv7 and armv8 targets to take a dap instance instead of a jtag chain position - restructure tap/dap/target relations, jtag tap no longer references the dap, daps are now independently created and initialized. - clean up swd connect - re-initialize DAP also on JTAG errors (e.g. after reset, power cycle) - update documentation - update target files Change-Id: I322cf3969b5407c25d1d3962f9d9b9bc1df067d9 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4468 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-03-23 15:17:29 -05:00
dap create $_CHIPNAME.m0app.dap -chain-position $_CHIPNAME.m0app
dap create $_CHIPNAME.m0sub.dap -chain-position $_CHIPNAME.m0sub
target create $_CHIPNAME.m0app cortex_m -dap $_CHIPNAME.m0app.dap
target create $_CHIPNAME.m0sub cortex_m -dap $_CHIPNAME.m0sub.dap
tcl/target: Add configuration for NXP LPC4370 processor New configuration for NXP LPC4370 which consists of a Cortex-M4 and two Cortex-M0 cores. Change-Id: I9918e3ff33218a14a99e4bbab9dce2e7b45b4d96 Signed-off-by: Jim Norris <u17263@att.net> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2124 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-05-02 21:04:45 -05:00
# 32+8+32 KB SRAM
$_CHIPNAME.m0app configure -work-area-phys 0x10080000 \
-work-area-size 0x92000 -work-area-backup 0
# 16+2 KB M0 subsystem SRAM
$_CHIPNAME.m0sub configure -work-area-phys 0x18000000 \
-work-area-size 0x4800 -work-area-backup 0
# Default to the Cortex-M4
targets $_CHIPNAME.m4
}
if { ![using_hla] } {
cortex_m reset_config vectreset
}