Linux-router

Set Linux as router in one command. Able to Provide Internet, or create Wifi hotspot. Support transparent proxy (redsocks). Also useful for routing VM/containers.

It wraps iptables, dnsmasq etc. stuff. Use in one command, restore in one command or by control-c.

Buy me a coffee

Features

Basic features:

• Create a NATed sub-network
• Provide Internet
• DHCP server and RA
• DNS server
• IPv6 (NAT only for now)
• Creating Wifi hotspot:
  • Channel selecting
  • Choose encryptions: WPA2/WPA, WPA2, WPA, No encryption
  • Hidden SSID
  • Create AP on the same interface you are getting Internet (require same channel)
• Transparent proxy (redsocks)
• DNS proxy
• Compatible with NetworkManager (automatically set interface as unmanaged)

For many other features, see below CLI usage

Useful in these situations

Internet----(eth0/wlan0)-Linux-(wlanX)AP
                                       |--client
                                       |--client

                                    Internet
Wifi AP(no DHCP)                        |
    |----(wlan1)-Linux-(eth0/wlan0)------
    |           (DHCP)
    |--client
    |--client

                                    Internet
 Switch                                 |
    |---(eth1)-Linux-(eth0/wlan0)--------
    |--client
    |--client

Internet----(eth0/wlan0)-Linux-(eth1)------Another PC

Internet----(eth0/wlan0)-Linux-(virtual interface)-----VM/container

Usage

Provide Internet to an interface

# lnxrouter -i eth1

Provide an interface's Internet to another interface

# lnxrouter -i eth1 -o vpn0 --dhcp-dns 1.1.1.1

Create Wifi hotspot

# lnxrouter --ap wlan0 MyAccessPoint --password MyPassPhrase

LAN without Internet

# lnxrouter -n -i eth1
# lnxrouter -n --ap wlan0 MyAccessPoint --password MyPassPhrase

Transparent proxy with Tor

# lnxrouter -i eth1 --tp 9040 --dns 9053

In torrc

TransPort 0.0.0.0:9040 
DNSPort 0.0.0.0:9053
TransPort [::]:9040 
DNSPort [::]:9053

Internet for LXC

Create a bridge

# brctl addbr lxcbr5

In LXC container config

lxc.network.type = veth
lxc.network.flags = up
lxc.network.link = lxcbr5
lxc.network.hwaddr = xx:xx:xx:xx:xx:xx

# lnxrouter -i lxcbr5

Use as transparent proxy for LXD

Create a bridge

# brctl addbr lxdbr5

Create and add LXD profile

$ lxc profile create profile5
$ lxc profile edit profile5

### profile content ###
config: {}
description: ""
devices:
  eth0:
    name: eth0
    nictype: bridged
    parent: lxdbr5
    type: nic
name: profile5

$ lxc profile add <container> profile5

That should make one container have 2 profiles. profile5 will override container'seth0.

# lnxrouter -i lxdbr5 --tp 9040 --dns 9053

To remove that new profile from container

$ lxc profile remove <container> profile5

To not use profile

Add device eth0 to container overriding default eth0

$ lxc config device add <container> eth0 nic name=eth0 nictype=bridged parent=lxdbr5

To remove the customized eth0 to restore default eth0

$ lxc config device remove <container> eth0

Use as transparent proxy for VirtualBox

On VirtualBox's global settings, create a host-only network vboxnet5 with DHCP disabled.

# lnxrouter -i vboxnet5 --tp 9040 --dns 9053

Use as transparent proxy for firejail

Create a bridge

# brctl addbr firejail5

# lnxrouter -i firejail5 -g 192.168.55.1 --tp 9040 --dns 9053 
$ firejail --net=firejail5 --dns=192.168.55.1 --blacklist=/var/run/nscd

CLI usage and other features

Usage: lnxrouter <options>

Options:
    -h, --help              Show this help
    --version               Print version number

    -i <interface>          Interface to make NATed sub-network,
                            and to provide Internet to
                            (To create Wifi hotspot use '--ap' instead)
    -o <interface>          Specify an inteface to provide Internet from.
                            (Note using this with default DNS option may leak
                            queries to other interfaces)
    -n                      Do not provide Internet (See Notice 1)
    --ban-priv              Disallow clients to access my private network
    
    -g <ip>                 Set this host's IPv4 address, netmask is 24 
    -6                      Enable IPv6 (NAT)
    --no4                   Disable IPv4 Internet (not forwarding IPv4).
                            Usually used with '-6'
                            (See Notice 1)
    --p6 <prefix>           Set IPv6 prefix (length 64) (example: fd00:1:2:3::)
                            
    --dns <ip>|<port>|<ip:port>
                            DNS server's upstream DNS.
                            Use ',' to seperate multiple servers
                            (default: use /etc/resolve.conf)
                            (Note IPv6 addresses need '[]' around)
    --no-dns                Do not serve DNS
    --no-dnsmasq            Disable dnsmasq server (DHCP, DNS, RA)
    --catch-dns             Transparent DNS proxy, redirect packets(TCP/UDP) 
                            whose destination port is 53 to this host
    --log-dns               Show DNS query log
    --dhcp-dns <IP1[,IP2]>|no
                            Set IPv4 DNS offered by DHCP (default: this host)
    --dhcp-dns6 <IP1[,IP2]>|no
                            Set IPv6 DNS offered by DHCP (RA) 
                            (default: this host)
                            (Note IPv6 addresses need '[]' around)
    --hostname <name>       DNS server associate this name with this host.
                            Use '-' to read name from /etc/hostname
    -d                      DNS server will take into account /etc/hosts
    -e <hosts_file>         DNS server will take into account additional 
                            hosts file
    
    --mac <MAC>             Set MAC address
 
    --tp <port>             Transparent proxy,
                            redirect non-LAN TCP and UDP traffic to port.
                            Usually used with '--dns'
    
  Wifi hotspot options:
    --ap <wifi interface> <SSID>
                            Create Wifi access point
    --password <password>   Wifi password
    
    --hidden                Hide access point (not broadcast SSID)
    --no-virt               Do not create virtual interface
                            Using this you can't use same wlan interface
                            for both Internet and AP
    -c <channel>            Channel number (default: 1)
    --country <code>        Set two-letter country code for regularity
                            (example: US)
    --freq-band <GHz>       Set frequency band: 2.4 or 5 (default: 2.4)
    --driver                Choose your WiFi adapter driver (default: nl80211)
    -w <WPA version>        Use 1 for WPA, use 2 for WPA2, use 1+2 for both
                            (default: 1+2)
    --psk                   Use 64 hex digits pre-shared-key instead of
                            passphrase
    --mac-filter            Enable Wifi hotspot MAC address filtering
    --mac-filter-accept     Location of Wifi hotspot MAC address filter list
                            (defaults to /etc/hostapd/hostapd.accept)
    --hostapd-debug <level> 1 or 2. Passes -d or -dd to hostapd
    --isolate-clients       Disable wifi communication between clients
    
    --ieee80211n            Enable IEEE 802.11n (HT)
    --ieee80211ac           Enable IEEE 802.11ac (VHT)
    --ht_capab <HT>         HT capabilities (default: [HT40+])
    --vht_capab <VHT>       VHT capabilities
    
    --no-haveged            Do not run haveged automatically when needed

  Instance managing:
    --daemon                Run in background
    --list-running          Show running instances
    --list-clients <id>     List clients of an instance
    --stop <id>             Stop a running instance
        For <id> you can use PID or subnet interface name.
        You can get them with '--list-running'

    Notice 1:   This script assume your host's default policy won't forward
                packets, so the script won't explictly ban forwarding in any
                mode. In some case may cause unwanted communication between 2
                networks, which you should check if you want isolated network

These changes to system will not be restored by script's cleanup:

1. /proc/sys/net/ipv4/ip_forward = 1 and /proc/sys/net/ipv6/conf/all/forwarding = 1, needed by NAT Internet sharing.
2. dnsmasq in Apparmor complain mode

Dependencies

• bash
• procps or procps-ng
• iproute2
• dnsmasq
• iptables

Wifi hotspot:

• hostapd
• iw
• iwconfig (you only need this if 'iw' can not recognize your adapter)
• haveged (optional)

TODO

• Option to randomize MAC

Donate

Buy me a coffee, or just give a star!

Thanks

Many thanks to project create_ap.