version 0.8.1

* add options for wifi66

* rebase to 0.7.6 and upgrade version to 0.8.0-unstable0

* fix channel detection

* can_transmit_to_channel: fix 5GHz and 6GHz freq range

* can_transmit_to_channel: limit freq integer part to 4 digits

* enable wmm when wifi 6 is enabled

* lint remove stray spaces

* Revert "lint remove stray spaces"

This reverts commit 8830b95cff.

---------

Co-authored-by: garywill <garywill@disroot.org>
Co-authored-by: Phani Pavan K <kphanipavan+goose@gmail.com>

README.md

@@ -4,7 +4,7 @@ Set Linux as router in one command. Able to provide Internet, or create WiFi hot
 
 It wraps `iptables`, `dnsmasq` etc. stuff. Use in one command, restore in one command or by `control-c` (or even by closing terminal window).
 
-[Linux-Router News & Developer Notes 📰](https://github.com/garywill/linux-router/issues/28) | [More tools and projects 🛠️](https://garywill.github.io) | [🍻 Buy me a coffee ❤️](https://github.com/garywill/receiving/blob/master/receiving_methods.md)
+[More tools and projects 🛠️](https://garywill.github.io) | [🍻 Buy me a coffee ❤️](https://github.com/garywill/receiving/blob/master/receiving_methods.md)
 
 
 ## Features
@@ -19,13 +19,17 @@ Basic features:
   - Specify upstream DNS (kind of a plain DNS proxy)
 - IPv6 (behind NATed LAN, like IPv4)
 - Creating WiFi hotspot:
+  - Wifi 3/4/5/6
+  - 2.4GHz, 5GHz
   - Channel selecting
   - Choose encryptions: WPA2/WPA, WPA2, WPA, No encryption
-  - Create AP on the same interface you are getting Internet (usually require same channel)
+  - Create AP on the same interface you are getting Internet (Need hardware support. Usually require same channel)
 - Transparent proxy (redsocks)
 - Transparent DNS proxy (hijack port 53 packets)
-- Detect NetworkManager and make sure it won't interfere (handle interface (un)managed status)
-- You can run many instances, to create many different networks. Has instances managing feature.
+- Detect and prevent interference from following Linux system daemons:
+  - NetworkManager (handle interface (un)managed status)
+  - firewalld (use temporary `trusted` zone)
+- Instances managing. You can run multiple instances, to create different sub-networks.
 
 **For many other features, see below [CLI usage](#cli-usage-and-other-features)**
 
@@ -66,7 +70,7 @@ Internet----(eth0/wlan0)-Linux-(virtual interface)-----VM/container
 
 1-file-script. Release on [Linux-router repo on Github](https://github.com/garywill/linux-router). Just download and run the bash script (meet the dependencies). In this case use without installation.
 
-> I'm currently not packaging for any distro. If you do, open a PR and add the link (can be with a version badge) to list here
+I'm currently not packaging for any distro. If you do, open a PR and add the link (can be with a version badge) to list here
 
 | Linux distro |                                                                                                            |
 | ------------ | ---------------------------------------------------------------------------------------------------------- |
@@ -81,9 +85,9 @@ Internet----(eth0/wlan0)-Linux-(virtual interface)-----VM/container
 - iptables (or nftables with `iptables-nft` translation linked)
 - WiFi hotspot dependencies
   - hostapd
-  - iw
-  - iwconfig (you only need this if 'iw' can not recognize your adapter)
+  - iw (or iwconfig, when iw can not recognize adapter)
   - haveged (optional)
+  - crda and wireless-regdb (optional)
 
 
 
@@ -91,7 +95,7 @@ Internet----(eth0/wlan0)-Linux-(virtual interface)-----VM/container
 
 ### Provide Internet to an interface
 
-```
+```bash
 sudo lnxrouter -i eth1
 ```
 
@@ -99,7 +103,7 @@ no matter which interface (other than `eth1`) you're getting Internet from.
 
 ### Create WiFi hotspot
 
-```
+```bash
 sudo lnxrouter --ap wlan0 MyAccessPoint -p MyPassPhrase
 ```
 
@@ -111,16 +115,14 @@ Clients access Internet through only `isp5`
 
 <details>
 
-```
+```bash
 sudo lnxrouter -i eth1 -o isp5  --no-dns  --dhcp-dns 1.1.1.1  -6 --dhcp-dns6 [2606:4700:4700::1111]
 ```
 
 > In this case of usage, it's recommended to:
 > 
 > 1. Stop serving local DNS
-> 2. Tell clients which DNS to use ISP5's DNS. (Or, a safe public DNS, like above example)
-
-> Also, read *Notice 1*
+> 2. Tell clients which DNS to use (ISP5's DNS. Or, a safe public DNS, like above example)
 
 </details>
 
@@ -128,12 +130,13 @@ sudo lnxrouter -i eth1 -o isp5  --no-dns  --dhcp-dns 1.1.1.1  -6 --dhcp-dns6 [26
 
 <details>
 
-```
+```bash
 sudo lnxrouter -n -i eth1
-sudo lnxrouter -n --ap wlan0 MyAccessPoint -p MyPassPhrase
 ```
 
-> Read _Notice 1_
+```bash
+sudo lnxrouter -n --ap wlan0 MyAccessPoint -p MyPassPhrase
+```
 
 </details>
 
@@ -143,7 +146,7 @@ sudo lnxrouter -n --ap wlan0 MyAccessPoint -p MyPassPhrase
 
 Create a bridge
 
-```
+```bash
 sudo brctl addbr lxcbr5
 ```
 
@@ -156,7 +159,7 @@ lxc.network.link = lxcbr5
 lxc.network.hwaddr = xx:xx:xx:xx:xx:xx
 ```
 
-```
+```bash
 sudo lnxrouter -i lxcbr5
 ```
 
@@ -168,7 +171,7 @@ All clients' Internet traffic go through, for example, Tor (notice this example
 
 <details>
 
-```
+```bash
 sudo lnxrouter -i eth1 --tp 9040 --dns 9053 -g 192.168.55.1 -6 --p6 fd00:5:6:7::
 ```
 
@@ -193,7 +196,7 @@ To not give our infomation to clients. Clients can still access Internet.
 
 <details>
 
-```
+```bash
 sudo lnxrouter -i eth1 \
     --tp 9040 --dns 9053 \
     --random-mac \
@@ -211,13 +214,13 @@ sudo lnxrouter -i eth1 \
 
 Create a bridge
 
-```
+```bash
 sudo brctl addbr lxdbr5
 ```
 
 Create and add a new LXD profile overriding container's `eth0`
 
-```
+```bash
 lxc profile create profile5
 lxc profile edit profile5
 
@@ -235,13 +238,13 @@ name: profile5
 lxc profile add <container> profile5
 ```
 
-```
+```bash
 sudo lnxrouter -i lxdbr5 --tp 9040 --dns 9053
 ```
 
 To remove that new profile from container
 
-```
+```bash
 lxc profile remove <container> profile5
 ```
 
@@ -249,13 +252,13 @@ lxc profile remove <container> profile5
 
 Add new `eth0` to container overriding default `eth0`
 
-```
+```bash
 lxc config device add <container> eth0 nic name=eth0 nictype=bridged parent=lxdbr5
 ```
 
 To remove the customized `eth0` to restore default `eth0`
 
-```
+```bash
 lxc config device remove <container> eth0
 ```
 
@@ -267,7 +270,7 @@ lxc config device remove <container> eth0
 
 In VirtualBox's global settings, create a host-only network `vboxnet5` with DHCP disabled.
 
-```
+```bash
 sudo lnxrouter -i vboxnet5 --tp 9040 --dns 9053
 ```
 
@@ -279,11 +282,11 @@ sudo lnxrouter -i vboxnet5 --tp 9040 --dns 9053
 
 Create a bridge
 
-```
+```bash
 sudo brctl addbr firejail5
 ```
 
-```
+```bash
 sudo lnxrouter -i firejail5 -g 192.168.55.1 --tp 9040 --dns 9053 
 firejail --net=firejail5 --dns=192.168.55.1 --blacklist=/var/run/nscd
 ```
@@ -309,17 +312,16 @@ Options:
                             and to provide Internet to
                             (To create WiFi hotspot use '--ap' instead)
     -o <interface>          Specify an inteface to provide Internet from.
-                            (See Notice 1)
                             (Note using this with default DNS option may leak
                             queries to other interfaces)
-    -n                      Do not provide Internet (See Notice 1)
+    -n                      Do not provide Internet
     --ban-priv              Disallow clients to access my private network
 
     -g <ip>                 This host's IPv4 address in subnet (mask is /24)
                             (example: '192.168.5.1' or '5' shortly)
     -6                      Enable IPv6 (NAT)
-    --no4                   Disable IPv4 Internet (not forwarding IPv4)
-                            (See Notice 1). Usually used with '-6'
+    --no4                   Disable IPv4 Internet (not forwarding IPv4).
+                            Usually used with '-6'
 
     --p6 <prefix>           Set IPv6 LAN address prefix (length 64)
                             (example: 'fd00:0:0:5::' or '5' shortly)
@@ -328,7 +330,7 @@ Options:
     --dns <ip>|<port>|<ip:port>
                             DNS server's upstream DNS.
                             Use ',' to seperate multiple servers
-                            (default: use /etc/resolve.conf)
+                            (default: use /etc/resolv.conf)
                             (Note IPv6 addresses need '[]' around)
     --no-dns                Do not serve DNS
     --no-dnsmasq            Disable dnsmasq server (DHCP, DNS, RA)
@@ -382,19 +384,19 @@ Options:
                             (defaults to /etc/hostapd/hostapd.accept)
     --hostapd-debug <level> 1 or 2. Passes -d or -dd to hostapd
     --isolate-clients       Disable wifi communication between clients
+    --sta-timeout <seconds> Timeout to disconnect a no-signal client
     --no-haveged            Do not run haveged automatically when needed
     --hs20                  Enable Hotspot 2.0
 
-    WiFi 4 (802.11n) configs:
-    --wifi4                 Enable IEEE 802.11n (HT)
-    --req-ht                Require station HT (High Throughput) mode
-    --ht-capab <HT caps>    HT capabilities (default: [HT40+])
-
-    WiFi 5 (802.11ac) configs:
-    --wifi5                 Enable IEEE 802.11ac (VHT)
-    --req-vht               Require station VHT (Very High Thoughtput) mode
-    --vht-capab <VHT caps>  VHT capabilities
+  WiFi 4 (802.11n) configs (2.4G/5GHz):  (default: not enable)
+    --wifi4                 Enable IEEE 802.11n (HT, High Throughput)
+    --ht-capab <HT caps>    HT capabilities (example: '[HT40+][DSSS_CCK-40]')
+                            (default: '[HT40+]')
+    --req-wifi4             Only support Wifi>=4 clients
 
+  WiFi 5 (802.11ac) configs (5GHz):  (default: not enable)
+    --wifi5                 Enable IEEE 802.11ac (VHT, Very High Thoughtput)
+    --vht-capab <VHT caps>  VHT capabilities (example: '[VHT160][RXLDPC]')
     --vht-ch-width <index>  Index of VHT channel width:
                                 0 for 20MHz or 40MHz (default)
                                 1 for 80MHz
@@ -404,9 +406,32 @@ Options:
                             segment. Use with '--vht-ch-width'
     --vht-seg1-ch <channel> Channel index of VHT center frequency for secondary
                             (second 80MHz) segment. Use with '--vht-ch-width 3'
+    --req-wifi5             Only support Wifi>=5 clients
+
+  WiFi 6 (802.11ax) configs (2.4G/5GHz):  (default: not enable)
+    --wifi6                 Enable IEEE 802.11ax (HE, High Efficiency)
+    --he-ch-width <index>   Index of HE channel width:
+                                0 for 20MHz or 40MHz (default)
+                                1 for 80MHz
+                                2 for 160MHz
+                                3 for 80+80MHz (Non-contigous 160MHz)
+    --he-seg0-ch <channel>  Channel index of HE center frequency for primary
+                            segment. Use with '--he-ch-width'
+    --he-seg1-ch <channel>  Channel index of HE center frequency for secondary
+                            (second 80MHz) segment. Use with '--he-ch-width 3'
+    --he-su-bfe             HE Single User Beamformee support
+    --he-su-bfr             HE Single User Beamformer support
+    --he-mu-bfr             HE Multi User Beamformer support
+    --req-wifi6             Only support Wifi>=6 clients
+    --p2ptwt                Peer-to-Peer Target Wake Time support
+
+    Note: Some cutting-edge Wifi features strongly depends on hostapd built
+          with specific flags enabled and compatible hardware
 
   Instance managing:
     --daemon                Run in background
+    --keep-confdir          Don't delete the temporary config dir after exit
+
     -l, --list-running      Show running instances
     --lc, --list-clients <id|interface>
                             List clients of an instance. Or list neighbors of
@@ -415,12 +440,6 @@ Options:
     --stop <id>             Stop a running instance
         For <id> you can use PID or subnet interface name.
         You can get them with '--list-running'
-
-    Notice 1:   This script assume your host's default policy won't forward
-                packets, so the script won't explictly ban forwarding in any
-                mode. In some unexpected case (eg. mistaken configurations) may
-                cause unwanted packets leakage between 2 networks, which you
-                should be aware of if you want isolated network
 ```
 
 </details>
@@ -444,7 +463,7 @@ Visit [**my homepage** 🏡](https://garywill.github.io) to see **more tools and
 > 
 > 🥂 ( ^\_^) o自自o (^_^ ) 🍻
 
-🤝 Bisides, thank [create_ap](https://github.com/oblique/create_ap) by [oblique](https://github.com/oblique). This script was forked from create\_ap. Now they are quite different. (See `history` branch for how I modified create_ap). 🤝 Also thank those who contributed to that project.
+🤝 Bisides, thank [create_ap](https://github.com/oblique/create_ap) by [oblique](https://github.com/oblique). This script was forked from create\_ap. Now they are quite different. 🤝 Also thank those people who contributed to that project.
 
 👨‍💻 You can be contributor, too! 
 
@@ -452,30 +471,9 @@ Visit [**my homepage** 🏡](https://garywill.github.io) to see **more tools and
 - 🍃 Also some [unfulfilled enhancements in the Issues](https://github.com/garywill/linux-router/issues?q=is%3Aissue+is%3Aopen+label%3Aenhancement)
 - 🙋‍♂️ Contributions are not limited to coding. There're [some posts and questions](https://github.com/garywill/linux-router/issues) that need more people to answer
 
-## Notice
-
-<details>
-
-```
-    Notice 1:   This script assume your host's default policy won't forward
-                packets, so the script won't explictly ban forwarding in any
-                mode. In some unexpected case (eg. mistaken configurations) may
-                cause unwanted packets leakage between 2 networks, which you
-                should be aware of if you want isolated network
-```
-
-</details>
-
 ## TODO
-
-Sooner is better:
-- Detect firewalld and make sure it won't interfere our interface
-
-Future:
 - WPA3
 - Global IPv6
-- Explictly ban forwarding if not needed
-- Bring bridging method back
 
 ## License