Ticket #23273 found a flaw where we were unable to sign legacy-transactions
using the external signer, even if we're still on non-london network. That's
fixed in this PR.
Additionally, I found that even when supplying all parameters, it was impossible
to sign a london-transaction on an unsynched node. It's a pretty common usecase
that someone wants to sign a transaction using an unsynced 'vanilla' node,
providing all necessary data. Our setDefaults, however, insisted on checking the
current block against the config. This PR therefore adds a case, so that if both
MaxPriorityFeePerGas and MaxFeePerGas are provided, we accept them as given.
OBS This PR fixes a regression -- on current master, we are unable to sign a
london-transaction unless the node is synched, which may break scenarios where
geth (or clef) is used as a cold wallet.
Fixes#23273
* internal/ethapi: revert + fix properly in al tracer
* internal/ethapi: use toMessage instead of creating new message
* internal/ethapi: remove ineffassign
* core: fix invalid unmarshalling, fix test
Co-authored-by: Martin Holst Swende <martin@swende.se>
* internal/ethapi/api: use hexutil.uint for blockCount parameter instead of int for feeHistory
* return hex value for oldestBlock instead of number
* return uint64 from oracle.resolveBlockRange
* eth/gasprice: fixed test
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
* internal/ethapi: add baseFee to RPCMarshalHeader
* internal/ethapi: add FeeCap, Tip and correct GasPrice to EIP-1559 RPCTransaction results
* core,eth,les,internal: add support for tip estimation in gas price oracle
* internal/ethapi,eth/gasprice: don't suggest tip larger than fee cap
* core/types,internal: use correct eip1559 terminology for json marshalling
* eth, internal/ethapi: fix rebase problems
* internal/ethapi: fix rpc name of basefee
* internal/ethapi: address review concerns
* core, eth, internal, les: simplify gasprice oracle (#25)
* core, eth, internal, les: simplify gasprice oracle
* eth/gasprice: fix typo
* internal/ethapi: minor tweak in tx args
* internal/ethapi: calculate basefee for pending block
* internal/ethapi: fix panic
* internal/ethapi, eth/tracers: simplify txargs ToMessage
* internal/ethapi: remove unused param
* core, eth, internal: fix regressions wrt effective gas price in the evm
* eth/gasprice: drop weird debug println
* internal/jsre/deps: hack in 1559 gas conversions into embedded web3
* internal/jsre/deps: hack basFee to decimal conversion
* internal/ethapi: init feecap and tipcap for legacy txs too
* eth, graphql, internal, les: fix gas price suggestion on all combos
* internal/jsre/deps: handle decimal tipcap and feecap
* eth, internal: minor review fixes
* graphql, internal: export max fee cap RPC endpoint
* internal/ethapi: fix crash in transaction_args
* internal/ethapi: minor refactor to make the code safer
Co-authored-by: Ryan Schneider <ryanleeschneider@gmail.com>
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: gary rong <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
There are two transaction parameter structures defined in
the codebase, although for different purposes. But most of
the parameters are shared. So it's nice to reduce the code
duplication by merging them together.
Co-authored-by: Martin Holst Swende <martin@swende.se>
This is the initial implementation of EIP-1559 in packages core/types and core.
Mining, RPC, etc. will be added in subsequent commits.
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR cleans up the CI build system and fixes a couple of issues.
- The go tool launcher code has been moved to internal/build. With the new
toolchain functions, the environment of the host Go (i.e. the one that built
ci.go) and the target Go (i.e. the toolchain downloaded by -dlgo) are isolated
more strictly. This is important to make cross compilation and -dlgo work
correctly in more cases.
- The -dlgo option now skips the download and uses the host Go if the running Go
version matches dlgoVersion exactly.
- The 'test' command now supports -dlgo, -cc and -arch. Running unit tests with
foreign GOARCH is occasionally useful. For example, it can be used to run
32-bit tests on Windows. It can also be used to run darwin/amd64 tests on
darwin/arm64 using Rosetta 2.
- The 'aar', 'xcode' and 'xgo' commands now use a slightly different method to
install external tools. They previously used `go get`, but this comes with the
annoying side effect of modifying go.mod. They now use `go install` instead,
which is the recommended way of installing tools without modifying the local
module.
- The old build warning about outdated Go version has been removed because we're
much better at keeping backwards compatibility now.
* core/vm: implement AccessListTracer
* eth: implement debug.createAccessList
* core/vm: fixed nil panics in accessListTracer
* eth: better error messages for createAccessList
* eth: some fixes on CreateAccessList
* eth: allow for provided accesslists
* eth: pass accesslist by value
* eth: remove created acocunt from accesslist
* core/vm: simplify access list tracer
* core/vm: unexport accessListTracer
* eth: return best guess if al iteration times out
* eth: return best guess if al iteration times out
* core: docstring, unexport methods
* eth: typo
* internal/ethapi: move createAccessList to eth package
* internal/ethapi: remove reexec from createAccessList
* internal/ethapi: break if al is equal to last run, not if gas is equal
* internal/web3ext: fixed arguments
* core/types: fixed equality check for accesslist
* core/types: no hardcoded vals
* core, internal: simplify access list generation, make it precise
* core/vm: fix typo
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
This change adds support for logging JSON records when the --log.json flag is
given. The --debug and --backtrace flags are deprecated and replaced by
--log.debug and --log.backtrace.
While changing this, it was noticed that the --memprofilerate and
--blockprofilerate were ineffective (they were always overridden even if
--pprof.memprofilerate was not set). This is also fixed.
Co-authored-by: Felix Lange <fjl@twurst.com>
This removes the duplicated definition of eth_chainID
in package eth and updates the definition in internal/ethapi
to treat chain ID as a bigint.
Co-authored-by: Felix Lange <fjl@twurst.com>
* les: move serverPool to les/vflux/client
* les: add metrics
* les: moved ValueTracker inside ServerPool
* les: protect against node registration before server pool is started
* les/vflux/client: fixed tests
* les: make peer registration safe
This adds support for EIP-2718 typed transactions as well as EIP-2930
access list transactions (tx type 1). These EIPs are scheduled for the
Berlin fork.
There very few changes to existing APIs in core/types, and several new APIs
to deal with access list transactions. In particular, there are two new
constructor functions for transactions: types.NewTx and types.SignNewTx.
Since the canonical encoding of typed transactions is not RLP-compatible,
Transaction now has new methods for encoding and decoding: MarshalBinary
and UnmarshalBinary.
The existing EIP-155 signer does not support the new transaction types.
All code dealing with transaction signatures should be updated to use the
newer EIP-2930 signer. To make this easier for future updates, we have
added new constructor functions for types.Signer: types.LatestSigner and
types.LatestSignerForChainID.
This change also adds support for the YoloV3 testnet.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Ryan Schneider <ryanleeschneider@gmail.com>
This PR prevents users from submitting transactions without EIP-155 enabled. This behaviour can be overridden by specifying the flag --rpc.allow-unprotected-txs=true.
This PR introduces:
- db.put to put a value into the database
- db.get to read a value from the database
- db.delete to delete a value from the database
- db.stats to check compaction info from the database
- db.compact to trigger a db compaction
It also moves inspectdb to db.inspect.
During the snap and eth refactor, the net_version rpc call was falsely deprecated.
This restores the net_version RPC handler as most eth2 nodes and other software
depend on it.
This commit splits the eth package, separating the handling of eth and snap protocols. It also includes the capability to run snap sync (https://github.com/ethereum/devp2p/blob/master/caps/snap.md) , but does not enable it by default.
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* trie: fix tests to work on 32-bit systems
* les: make test work on 32-bit platform
* cmd/geth: fix windows-issues on tests
* trie: improve balance
* cmd/geth: make account tests less verbose + less mem intense
* rpc: make debug-level log output less verbose
* cmd/geth: lint
This new flag downloads a known version of Go and builds with it. This
is meant for environments where we can't easily upgrade the installed Go
version.
* .travis.yml: remove install step for PR test builders
We added this step originally to avoid re-building everything
for every test. go test has become much smarter in recent go
releases, so we no longer need to install anything here.
TAP is a text format for test results. Parsers for it are available in many languages,
making it easy to consume. I want TAP output from our protocol tests because the
Hive wrapper around them needs to know about the test names and their individual
results and logs. It would also be possible to just write this info as JSON, but I don't
want to invent a new format.
This also improves the normal console output for tests (when running without --tap).
It now prints -- RUN lines before any output from the test, and indents the log output
by one space.
ToHex was deprecated a couple years ago. The last remaining use
was in ToHexArray, which itself only had a single call site.
This just moves ToHexArray near its only remaining call site and
implements it using hexutil.Encode. This changes the default behaviour
of ToHexArray and with it the behaviour of eth_getProof. Previously we
encoded an empty slice as 0, now the empty slice is encoded as 0x.
This allows users to estimate gas on top of arbitrary blocks as well as pending and latest.
Tracing on pending is useful for most users as it takes into account the current txpool while
tracing on latest might be useful for users that have little to know knowledge of the current
transactions in the network.
If blockNrOrHash is not specified, estimateGas defaults to pending
This PR significantly changes the APIs for instantiating Ethereum nodes in
a Go program. The new APIs are not backwards-compatible, but we feel that
this is made up for by the much simpler way of registering services on
node.Node. You can find more information and rationale in the design
document: https://gist.github.com/renaynay/5bec2de19fde66f4d04c535fd24f0775.
There is also a new feature in Node's Go API: it is now possible to
register arbitrary handlers on the user-facing HTTP server. In geth, this
facility is used to enable GraphQL.
There is a single minor change relevant for geth users in this PR: The
GraphQL API is no longer available separately from the JSON-RPC HTTP
server. If you want GraphQL, you need to enable it using the
./geth --http --graphql flag combination.
The --graphql.port and --graphql.addr flags are no longer available.
This change introduces garbage collection for the light client. Historical
chain data is deleted periodically. If you want to disable the GC, use
the --light.nopruning flag.
This adds a test suite for discovery v4. The test suite is a port of the Hive suite for
discovery, and will replace the current suite on Hive soon-ish. The tests can be
run locally with this command:
devp2p discv4 test -remote enode//...
Co-authored-by: Felix Lange <fjl@twurst.com>
Exposing /debug/metrics and /debug/metrics/prometheus was dependent
on --pprof, which also exposes other HTTP APIs. This change makes it possible
to run the metrics server on an independent endpoint without enabling pprof.
* internal/ethapi: return revert reason for eth_call
* internal/ethapi: moved revert reason logic to doCall
* accounts/abi/bind/backends: added revert reason logic to simulated backend
* internal/ethapi: fixed linting error
* internal/ethapi: check if require reason can be unpacked
* internal/ethapi: better error logic
* internal/ethapi: simplify logic
* internal/ethapi: return vmError()
* internal/ethapi: move handling of revert out of docall
* graphql: removed revert logic until spec change
* rpc: internal/ethapi: added custom error types
* graphql: use returndata instead of return
Return() checks if there is an error. If an error is found, we return nil.
For most use cases it can be beneficial to return the output even if there
was an error. This code should be changed anyway once the spec supports
error reasons in graphql responses
* accounts/abi/bind/backends: added tests for revert reason
* internal/ethapi: add errorCode to revert error
* internal/ethapi: add errorCode of 3 to revertError
* internal/ethapi: unified estimateGasErrors, simplified logic
* internal/ethapi: unified handling of errors in DoEstimateGas
* rpc: print error data field
* accounts/abi/bind/backends: unify simulatedBackend and RPC
* internal/ethapi: added binary data to revertError data
* internal/ethapi: refactored unpacking logic into newRevertError
* accounts/abi/bind/backends: fix EstimateGas
* accounts, console, internal, rpc: minor error interface cleanups
* Revert "accounts, console, internal, rpc: minor error interface cleanups"
This reverts commit 2d3ef53c53.
* re-apply the good parts of 2d3ef53c53
* rpc: add test for returning server error data from client
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
* accounts/abi/bind/backend, internal/ethapi: recap gas limit with balance
* accounts, internal: address comment and fix lint
* accounts, internal: extend log message
* tiny nits to format hexutil.Big and nil properly
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* rpc flags related to starting http server renamed to http
* old rpc flags aliased and still functional
* pprof flags fixed
* renames gpo related flags
* linted
* renamed rpc flags for consistency and clarity
* added warn logs
* added more warn logs for all deprecated flags for consistency
* moves legacy flags to separate file, hides older flags under show-deprecated-flags command
* legacy prefix and moved some more legacy flags to legacy file
* fixed circular import
* added docs
* fixed imports lint error
* added notes about when flags were deprecated
* cmd/utils: group flags by deprecation date + reorder by date,
* modified deprecated comments for consistency, added warn log for --rpc
* making sure deprecated flags are still functional
* show-deprecated-flags command cleaned up
* fixed lint errors
* corrected merge conflict
* IsSet --> GlobalIsSet
* uncategorized flags, if not deprecated, displayed under misc
Co-authored-by: Martin Holst Swende <martin@swende.se>
* all: seperate consensus error and evm internal error
There are actually two types of error will be returned when
a tranaction/message call is executed: (a) consensus error
(b) evm internal error. The former should be converted to
a consensus issue, e.g. The sender doesn't enough asset to
purchase the gas it specifies. The latter is allowed since
evm itself is a blackbox and internal error is allowed to happen.
This PR emphasizes the difference by introducing a executionResult
structure. The evm error is embedded inside. So if any error
returned, it indicates consensus issue happens.
And also this PR improve the `EstimateGas` API to return the concrete
revert reason if the transaction always fails
* all: polish
* accounts/abi/bind/backends: add tests
* accounts/abi/bind/backends, internal: cleanup error message
* all: address comments
* core: fix lint
* accounts, core, eth, internal: address comments
* accounts, internal: resolve revert reason if possible
* accounts, internal: address comments
This PR adds service value measurement statistics to the light client. It
also adds a private API that makes these statistics accessible. A follow-up
PR will add the new server pool which uses these statistics to select
servers with good performance.
This document describes the function of the new components:
https://gist.github.com/zsfelfoldi/3c7ace895234b7b345ab4f71dab102d4
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
ToMessage is used to convert between ethapi.CallArgs and types.Message.
It reduces the length of the DoCall method by about half by abstracting out
the conversion between the CallArgs and the Message. This should improve the
code's maintainability and reusability.
Prior to this change, eth_call changed the balance of the sender account in the
EVM environment to 2^256 wei to cover the gas cost of the call execution.
We've had this behavior for a long time even though it's super confusing.
This commit sets the default call gasprice to zero instead of updating the balance,
which is better because it makes eth_call semantics less surprising. Removing
the built-in balance assignment also makes balance overrides work as expected.
This makes eth_call and eth_estimateGas use the zero address
as sender when the "from" parameter is not supplied.
Co-authored-by: Felix Lange <fjl@twurst.com>
This replaces the JavaScript interpreter used by the console with goja,
which is actively maintained and a lot faster than otto. Clef still uses otto
and eth/tracers still uses duktape, so we are currently dependent on three
different JS interpreters. We're looking to replace the remaining uses of otto
soon though.
* log: delete RotatingFileHandler
We added this for the dashboard, which is gone now. The
handler never really worked well and had data race and file
handling issues.
* internal/debug: remove unused RotatingFileHandler setup code
* build: remove env.sh
This removes the dirty symlink-to-self hack we've had for years. The
script was added to enable building without GOPATH and did that job
reliably for all this time. We can remove the workaround because modern
Go supports building without GOPATH natively.
* Makefile: add GO111MODULE=on to environment
* internal/testlog: print file+line number of log call in test log
This changes the unit test logger to print the actual file and line
number of the logging call instead of "testlog.go:44".
Output of 'go test -v -run TestServerListen ./p2p' before this change:
=== RUN TestServerListen
--- PASS: TestServerListen (0.00s)
testlog.go:44: DEBUG[01-08|15:16:31.651] UDP listener up addr=127.0.0.1:62678
testlog.go:44: DEBUG[01-08|15:16:31.651] TCP listener up addr=127.0.0.1:62678
testlog.go:44: TRACE[01-08|15:16:31.652] Accepted connection addr=127.0.0.1:62679
And after:
=== RUN TestServerListen
--- PASS: TestServerListen (0.00s)
server.go:868: DEBUG[01-08|15:25:35.679] TCP listener up addr=127.0.0.1:62712
server.go:557: DEBUG[01-08|15:25:35.679] UDP listener up addr=127.0.0.1:62712
server.go:912: TRACE[01-08|15:25:35.680] Accepted connection addr=127.0.0.1:62713
* internal/testlog: document use of t.Helper
* build: use golangci-lint
This changes build/ci.go to download and run golangci-lint instead
of gometalinter.
* core/state: fix unnecessary conversion
* p2p/simulations: fix lock copying (found by go vet)
* signer/core: fix unnecessary conversions
* crypto/ecies: remove unused function cmpPublic
* core/rawdb: remove unused function print
* core/state: remove unused function xTestFuzzCutter
* core/vm: disable TestWriteExpectedValues in a different way
* core/forkid: remove unused function checksum
* les: remove unused type proofsData
* cmd/utils: remove unused functions prefixedNames, prefixFor
* crypto/bn256: run goimports
* p2p/nat: fix goimports lint issue
* cmd/clef: avoid using unkeyed struct fields
* les: cancel context in testRequest
* rlp: delete unreachable code
* core: gofmt
* internal/build: simplify DownloadFile for Go 1.11 compatibility
* build: remove go test --short flag
* .travis.yml: disable build cache
* whisper/whisperv6: fix ineffectual assignment in TestWhisperIdentityManagement
* .golangci.yml: enable goconst and ineffassign linters
* build: print message when there are no lint issues
* internal/build: refactor download a bit
* build: bump PPAs to Go 1.13 (via longsleep), keep Trusty on 1.11
* travis, build, vendor: use own Go bundle for PPA builds
* travis, build, internal, vendor: smarter Go bundler, own untar
* build: updated ci-notes with new Go bundling, only make, don't test
Most of these changes are related to the Go 1.13 changes to test binary
flag handling.
* cmd/geth: make attach tests more reliable
This makes the test wait for the endpoint to come up by polling
it instead of waiting for two seconds.
* tests: fix test binary flags for Go 1.13
Calling flag.Parse during package initialization is prohibited
as of Go 1.13 and causes test failures. Call it in TestMain instead.
* crypto/ecies: remove useless -dump flag in tests
* p2p/simulations: fix test binary flags for Go 1.13
Calling flag.Parse during package initialization is prohibited
as of Go 1.13 and causes test failures. Call it in TestMain instead.
* build: remove workaround for ./... vendor matching
This workaround was necessary for Go 1.8. The Go 1.9 release changed
the expansion rules to exclude vendored packages.
* Makefile: use relative path for GOBIN
This makes the "Run ./build/bin/..." line look nicer.
* les: fix test binary flags for Go 1.13
Calling flag.Parse during package initialization is prohibited
as of Go 1.13 and causes test failures. Call it in TestMain instead.
* graphql, internal/ethapi: extend eth_call
This PR offers the third option parameter for eth_call API.
Caller can specify a batch of contracts for overriding the
original account metadata(nonce, balance, code, state).
It has a few advantages:
* It's friendly for debugging
* It's can make on-chain contract lighter for getting rid of
state access functions
* core, internal: address comments
* accounts/mananger, internal/ethapi/api: Add new function AllAccounts on account manager to remove the duplication code on getting all wallets accounts
* Rename to Accounts
* Rename to AllAccounts
This change ensures 'blockHash', 'blockNumber' and 'transactionIndex'
are set to null for pending transactions. This behavior is required by
the Ethereum JSON-RPC spec.
* add-date-to unstable
* fields-insteadof-split
* internal/build: support building with missing git
* docker: add git history back to support commit date in version
* internal/build: use PR commits hashes for PR builds
* accounts: add note about backing up the keystore
* cmd, accounts: move the printout to accountCreate
* internal, signer: add info when new account is created via rpc
* cmd, internal, signer: split logs
* cmd/geth: make account new output a bit more verbose
* accounts, core, internal, node: Add support for smartcard wallets
* accounts, internal: Changes in response to review
* vendor: pull in missing go-echd library
* accounts/scwallet, console: user friendly card opening
* accounts/scwallet: ordered wallets, tighter events, derivation logs
* accounts, console: frendly card errors, support pin unblock
* accounts/scwallet: fix crypto API change
* accounts/scwallet: rebase and update
* Fix some linter issues
* Remove the direct dependency on libpcsclite
Instead, use a go library that communicates with pcscd over a socket.
Also update the changes introduced by @gravityblast since this PR's
inception
* Temporary fix to the ADBU status call
* fix wallet status update
This is a temporary fix, better checks need to
be performed once the whole process has been
validated.
* Fix key derivation
* Add some documentation
* Update a comment to reflect the workings of the updated system
* Vendor keycard-go/derivationpath
* Formatting fixes
* Add instructions on how to install the card
* Achieve full transaction signature+sending
* PK derivation has to be supported by the card
* Fix linter issues
* Upgrade to keycard app v2.1.1
* Set gballet as codeowner of the smartcard wallet dir
* fix unnecessary condition linter warning
* refuse to overwrite the master key of a previously initialized card
* refresh the account list when initializing the card
* Update the card preparation instructions based on review feedback
* 'sanitize' JSON input
Co-Authored-By: gballet <gballet@gmail.com>
* Apply suggestions from code review
Co-Authored-By: gballet <gballet@gmail.com>
* fix a serialization error
* more review feedback
* More review feedback
* Can now specify the number of empty accounts to derive
* Fix rebase error: include norm package
* Update bip-39 ref and remove ebfe/scard from vendor
* Add missing dependency
* signer/clef: make use of json-rpc notification
* signer: tidy up output of OnApprovedTx
* accounts/external, signer: implement remote signing of text, make accounts_sign take hexdata
* clef: added basic testscript
* signer, external, api: add clique signing test to debug rpc, fix clique signing in clef
* signer: fix clique interoperability between geth and clef
* clef: rename networkid switch to chainid
* clef: enable chainid flag
* clef, signer: minor changes from review
* clef: more tests for signer
* Initial work on a graphql API
* Added receipts, and more transaction fields.
* Finish receipts, add logs
* Add transactionCount to block
* Add types and .
* Update Block type to be compatible with ethql
* Rename nonce to transactionCount in Account, to be compatible with ethql
* Update transaction, receipt and log to match ethql
* Add query operator, for a range of blocks
* Added ommerCount to Block
* Add transactionAt and ommerAt to Block
* Added sendRawTransaction mutation
* Add Call and EstimateGas to graphQL API
* Refactored to use hexutil.Bytes instead of HexBytes
* Replace BigNum with hexutil.Big
* Refactor call and estimateGas to use ethapi struct type
* Replace ethgraphql.Address with common.Address
* Replace ethgraphql.Hash with common.Hash
* Converted most quantities to Long instead of Int
* Add support for logs
* Fix bug in runFilter
* Restructured Transaction to work primarily with headers, so uncle data is reported properly
* Add gasPrice API
* Add protocolVersion API
* Add syncing API
* Moved schema into its own source file
* Move some single use args types into anonymous structs
* Add doc-comments
* Fixed backend fetching to use context
* Added (very) basic tests
* Add documentation to the graphql schema
* Fix reversion for formatting of big numbers
* Correct spelling error
* s/BigInt/Long/
* Update common/types.go
* Fixes in response to review
* Fix lint error
* Updated calls on private functions
* Fix typo in graphql.go
* Rollback ethapi breaking changes for graphql support
Co-Authored-By: Arachnid <arachnid@notdot.net>
Until this commit, when sending an RPC request that called `NewEVM`, a blank `vm.Config`
would be taken so as to set some options, based on the default configuration. If some extra
configuration switches were passed to the blockchain, those would be ignored.
This PR adds a function to get the config from the blockchain, and this is what is now used
for RPC calls.
Some subsequent changes need to be made, see https://github.com/ethereum/go-ethereum/pull/17955#pullrequestreview-182237244
for the details of the discussion.
* first impl of eth_getProof
* fixed docu
* added comments and refactored based on comments from holiman
* created structs
* handle errors correctly
* change Value to *hexutil.Big in order to have the same output as parity
* use ProofList as return type
* consensus/ethash: start remote ggoroutine to handle remote mining
* consensus/ethash: expose remote miner api
* consensus/ethash: expose submitHashrate api
* miner, ethash: push empty block to sealer without waiting execution
* consensus, internal: add getHashrate API for ethash
* consensus: add three method for consensus interface
* miner: expose consensus engine running status to miner
* eth, miner: specify etherbase when miner created
* miner: commit new work when consensus engine is started
* consensus, miner: fix some logics
* all: delete useless interfaces
* consensus: polish a bit
* build: add support for different package and binary names
* build: bump up copyright date
* build: change default PackageName to empty string
* build, internal, swarm: enhance build/release process
* build: hack ethereum-swarm as a "depends" in deb package
* build/ci: remove redundant variables
* build, cmd, mobile, params, swarm: remove VERSION file; rename Version to VersionMeta;
* internal: remove VERSION() method which reads VERSION file
* build: fix VersionFilePath to Version
* Makefile: remove clean_go_build_cache.sh until it works
* Makefile: revert removal of clean_go_build_cache.sh
These RPC calls are analogous to Parity's parity_addReservedPeer and
parity_removeReservedPeer.
They are useful for adjusting the trusted peer set during runtime,
without requiring restarting the server.
* debug: Use pprof goroutine writer in debug.Stacks() to ensure all goroutines are captured.
* Up to 64MB limit, previous code only captured first 1MB of goroutines.
* internal/debug: simplify stacks handler
* fix typo
* fix pointer receiver
ToECDSAPub was unsafe because it returned a non-nil key with nil X, Y in
case of invalid input. This change replaces ToECDSAPub with
UnmarshalPubkey across the codebase.
Most of these methods did not contain all the relevant information
inside the object and were not using a similar formatting type.
Moreover, the existence of a suboptimal String method breaks usage
with more advanced data dumping tools like go-spew.
This commit:
- Adds a --msgfile option to read the message to sign from a file
instead of command line argument.
- Adds a unit test for signing subcommands.
- Removes some weird whitespace in the code.
* core/types, core/vm, eth, tests: regenerate gencodec files
* Makefile: update devtools target
Install protoc-gen-go and print reminders about npm, solc and protoc.
Also switch to github.com/kevinburke/go-bindata because it's more
maintained.
* contracts/ens: update contracts and regenerate with solidity v0.4.19
The newer upstream version of the FIFSRegistrar contract doesn't set the
resolver anymore. The resolver is now deployed separately.
* contracts/release: regenerate with solidity v0.4.19
* contracts/chequebook: fix fallback and regenerate with solidity v0.4.19
The contract didn't have a fallback function, payments would be rejected
when compiled with newer solidity. References to 'mortal' and 'owned'
use the local file system so we can compile without network access.
* p2p/discv5: regenerate with recent stringer
* cmd/faucet: regenerate
* dashboard: regenerate
* eth/tracers: regenerate
* internal/jsre/deps: regenerate
* dashboard: avoid sed -i because it's not portable
* accounts/usbwallet/internal/trezor: fix go generate warnings