* cmd, consensus, core, miner: instatx clique for --dev
* cmd, consensus, clique: support configurable --dev block times
* cmd, core: allow --dev to use persistent storage too
This commit introduces a network simulation framework which
can be used to run simulated networks of devp2p nodes. The
intention is to use this for testing protocols, performing
benchmarks and visualising emergent network behaviour.
* ethdb: add Putter interface and Has method
* ethdb: improve docs and add IdealBatchSize
* ethdb: remove memory batch lock
Batches are not safe for concurrent use.
* core: use ethdb.Putter for Write* functions
This covers the easy cases.
* core/state: simplify StateSync
* trie: optimize local node check
* ethdb: add ValueSize to Batch
* core: optimize HasHeader check
This avoids one random database read get the block number. For many uses
of HasHeader, the expectation is that it's actually there. Using Has
avoids a load + decode of the value.
* core: write fast sync block data in batches
Collect writes into batches up to the ideal size instead of issuing many
small, concurrent writes.
* eth/downloader: commit larger state batches
Collect nodes into a batch up to the ideal size instead of committing
whenever a node is received.
* core: optimize HasBlock check
This avoids a random database read to get the number.
* core: use numberCache in HasHeader
numberCache has higher capacity, increasing the odds of finding the
header without a database lookup.
* core: write imported block data using a batch
Restore batch writes of state and add blocks, tx entries, receipts to
the same batch. The change also simplifies the miner.
This commit also removes posting of logs when a forked block is imported.
* core: fix DB write error handling
* ethdb: use RLock for Has
* core: fix HasBlock comment
* cmd/evm: adds ability to run individual state test file
* cmd/evm: Fix statetest runner to be more json friendly
* cmd/evm, tests: minor polishes, dump state on fail
Previously, NewManifest was asynchronous so subsequent code which tried
to use the returned manifest could error as the manifest was not yet
persisted.
This patch updates the Address type in common/types.go so that the Hex
function provides an EIP55-compliant output string. The implementation is pretty lightweight;
on my laptop the benchmark gives 1100ns/op, with the majority of that value due to the Keccak hash.
* core: reduce txpool event loop goroutines and sync structs
* cmd, core, eth: journal local transactions to disk
* core: journal replacement pending transactions too
* core: separate transaction journal from pool
The previous attempt to use --ethapi as a fallback if --ens-api is not
set does not work because --ens-api has a default value, and also
setting --ens-api to "" is the suggested way to disable ENS lookups.
Signed-off-by: Lewis Marshall <lewis@lmars.net>
With this commit, core/state's access to the underlying key/value database is
mediated through an interface. Database errors are tracked in StateDB and
returned by CommitTo or the new Error method.
Motivation for this change: We can remove the light client's duplicated copy of
core/state. The light client now supports node iteration, so tracing and storage
enumeration can work with the light client (not implemented in this commit).
The error returned by client.Upload was previously being ignored due to becoming
out of scope outside the if statement. This has been fixed by instead defining a
function which returns the hash and error (rather than trying to set the hash in
each branch of the if statement).
Currently http cors and websocket origins are a comma separated string in the
config object. These are replaced with string arrays that are more expressive in
case of a config file.
* p2p/discover, p2p/discv5: add marshaling methods to Node
* p2p/netutil: make Netlist decodable from TOML
* common/math: encode nil HexOrDecimal256 as 0x0
* cmd/geth: add --config file flag
* cmd/geth: add missing license header
* eth: prettify Config again, fix tests
* eth: use gasprice.Config instead of duplicating its fields
* eth/gasprice: hide nil default from dumpconfig output
* cmd/geth: hide genesis block in dumpconfig output
* node: make tests compile
* console: fix tests
* cmd/geth: make TOML keys look exactly like Go struct fields
* p2p: use discovery by default
This makes the zero Config slightly more useful. It also fixes package
node tests because Node detects reuse of the datadir through the
NodeDatabase.
* cmd/geth: make ethstats URL settable through config file
* cmd/faucet: fix configuration
* cmd/geth: dedup attach tests
* eth: add comment for DefaultConfig
* eth: pass downloader.SyncMode in Config
This removes the FastSync, LightSync flags in favour of a more
general SyncMode flag.
* cmd/utils: remove jitvm flags
* cmd/utils: make mutually exclusive flag error prettier
It now reads:
Fatal: flags --dev, --testnet can't be used at the same time
* p2p: fix typo
* node: add DefaultConfig, use it for geth
* mobile: add missing NoDiscovery option
* cmd/utils: drop MakeNode
This exposed a couple of places that needed to be updated to use
node.DefaultConfig.
* node: fix typo
* eth: make fast sync the default mode
* cmd/utils: remove IPCApiFlag (unused)
* node: remove default IPC path
Set it in the frontends instead.
* cmd/geth: add --syncmode
* cmd/utils: make --ipcdisable and --ipcpath mutually exclusive
* cmd/utils: don't enable WS, HTTP when setting addr
* cmd/utils: fix --identity
This PR deprecates the file related RPC calls in favour of an improved HTTP API.
The main aim is to expose a simple to use API which can be consumed by thin
clients (e.g. curl and HTML forms) without the need for complex logic (e.g.
manipulating prefix trie manifests).
This adds a swarm ls command which lists files and directories stored in a
manifest. Rather than listing all files, it uses "directory prefixes" in case there are a
lot of files in a manifest but you just want to traverse it.
This also includes some refactoring to the tests and the introduction of a
swarm/api/client package to make things easier to test.
This commit adds pluggable consensus engines to go-ethereum. In short, it
introduces a generic consensus interface, and refactors the entire codebase to
use this interface.
This commit solves several issues concerning the genesis block:
* Genesis/ChainConfig loading was handled by cmd/geth code. This left
library users in the cold. They could specify a JSON-encoded
string and overwrite the config, but didn't get any of the additional
checks performed by geth.
* Decoding and writing of genesis JSON was conflated in
WriteGenesisBlock. This made it a lot harder to embed the genesis
block into the forthcoming config file loader. This commit changes
things so there is a single Genesis type that represents genesis
blocks. All uses of Write*Genesis* are changed to use the new type
instead.
* If the chain config supplied by the user was incompatible with the
current chain (i.e. the chain had already advanced beyond a scheduled
fork), it got overwritten. This is not an issue in practice because
previous forks have always had the highest total difficulty. It might
matter in the future though. The new code reverts the local chain to
the point of the fork when upgrading configuration.
The change to genesis block data removes compression library
dependencies from package core.
* accounts, cmd, eth, ethdb: port logs over to new system
* ethdb: drop concept of cache distribution between dbs
* eth: fix some log nitpicks to make them nicer
Added the ability to directly compile and run ethereum assembly using
the evm utility: `evm run <file>`. This is equivalant to `evm compile
<file> | evm run`.
* Improved the standard evm tracer output and renamed it to WriteTrace
which now takes an io.Writer to write the logs to.
* Added WriteLogs which writes logs to the given writer in a readable
format.
* evm utility now also prints logs generated during the execution.
* common: remove CurrencyToString
Move denomination values to params instead.
* common: delete dead code
* common: move big integer operations to common/math
This commit consolidates all big integer operations into common/math and
adds tests and documentation.
There should be no change in semantics for BigPow, BigMin, BigMax, S256,
U256, Exp and their behaviour is now locked in by tests.
The BigD, BytesToBig and Bytes2Big functions don't provide additional
value, all uses are replaced by new(big.Int).SetBytes().
BigToBytes is now called PaddedBigBytes, its minimum output size
parameter is now specified as the number of bytes instead of bits. The
single use of this function is in the EVM's MSTORE instruction.
Big and String2Big are replaced by ParseBig, which is slightly stricter.
It previously accepted leading zeros for hexadecimal inputs but treated
decimal inputs as octal if a leading zero digit was present.
ParseUint64 is used in places where String2Big was used to decode a
uint64.
The new functions MustParseBig and MustParseUint64 are now used in many
places where parsing errors were previously ignored.
* common: delete unused big integer variables
* accounts/abi: replace uses of BytesToBig with use of encoding/binary
* common: remove BytesToBig
* common: remove Bytes2Big
* common: remove BigTrue
* cmd/utils: add BigFlag and use it for error-checked integer flags
While here, remove environment variable processing for DirectoryFlag
because we don't use it.
* core: add missing error checks in genesis block parser
* common: remove String2Big
* cmd/evm: use utils.BigFlag
* common/math: check for 256 bit overflow in ParseBig
This is supposed to prevent silent overflow/truncation of values in the
genesis block JSON. Without this check, a genesis block that set a
balance larger than 256 bits would lead to weird behaviour in the VM.
* cmd/utils: fixup import
This command was meant as a hackish way to upgrade our chain database way back
when nobody cared for live updates and the size of the database along with its
import times was small. With the current database weighing hundreds of GBs and
processing times of many days, this command is just ludicrous.
All the state and block tests are ran as part of our CU builds internally, as
well as have been added to hive black-box tests. As such, there is no reason for
maintaining an extra standalone tool.
Only ethereum/rpc-tests used this command, which hasn't been maintained for over
a year now, a lot of tests failing. What's left of it was moved underneath hive,
which can run the entire test against a black-box geth without special commands.
Also a new RPC test suite is being added which is also based on black box tests,
not needing special commands any more.
* cmd/geth: added 'geth bug' command
Added bug command to geth, which will open a browser window
with an issue template and some additional system information.
* cmd/geth: update bug with better infos
* cmd/geth: added browser fallback
* cmd/geth: govet yo momma
* whisper: mailserver test introduced, refactoring
* whisper: validation test updated
* whisper: max number of peers fixed
* whisper: verification bug fixed
* whisper: esthetic fix
* whisper: interface changed to simplify the transition to v5
* whisper: preparation for version switch
Reworked the EVM gas instructions to use 64bit integers rather than
arbitrary size big ints. All gas operations, be it additions,
multiplications or divisions, are checked and guarded against 64 bit
integer overflows.
In additon, most of the protocol paramaters in the params package have
been converted to uint64 and are now constants rather than variables.
* common/math: added overflow check ops
* core: vmenv, env renamed to evm
* eth, internal/ethapi, les: unmetered eth_call and cancel methods
* core/vm: implemented big.Int pool for evm instructions
* core/vm: unexported intPool methods & verification methods
* core/vm: added memoryGasCost overflow check and test
* swarm/network: integrity on incoming known chunks
* swarm/network: fix integrity check for incoming chunks
* swarm/storage: imrpoved integrity checking on chunks
* dbstore panics on corrupt chunk entry an prompts user to run cleandb
* memstore adds logging for garbage collection
* dbstore refactor item delete. correct partial deletes in Get
* cmd/swarm: added cleandb subcommand
- Handle a data race where a Ledger drops between list and open
- Prolong Ledger tx confirmation window to 30 days from 1 minute
- Simplify Ledger chainid-signature calculation and validation
- Simplify Ledger USB APDU request chunking algorithm
- Silence keystore account cache notifications for manual actions
- Only enable self derivations if wallet open succeeds
Reworked the EVM gas instructions to use 64bit integers rather than
arbitrary size big ints. All gas operations, be it additions,
multiplications or divisions, are checked and guarded against 64 bit
integer overflows.
In additon, most of the protocol paramaters in the params package have
been converted to uint64 and are now constants rather than variables.
* common/math: added overflow check ops
* core: vmenv, env renamed to evm
* eth, internal/ethapi, les: unmetered eth_call and cancel methods
* core/vm: implemented big.Int pool for evm instructions
* core/vm: unexported intPool methods & verification methods
* core/vm: added memoryGasCost overflow check and test
fixes#3444fixes#3494
networkid override
Added comments to explain why test against 0 appears twice
* Command line overrides saved config, saved config overrides system default
---
fixes#3476
bzzr get with path
Finally a hopefully clean commit for this PR
Added check for empty path to avoid SIGSEGV in path parser and resolver
Added requested tests for empty path and non-existing manifest.
However signature for StartHTTPServer had changed.
Now it's hacked as so:
StartHttpServer(api.API, &Server{Addr: "127.0.0.1:8504", CorsString: ""})
* Parse url before resolve when path and ENS is supplied, example
* swarm/api/http proxy server test for retrieval of subpath through get
* Removed nil entry assignment on subtrie leaf in recursive key retrieval
* Cleaned up path-or-no-path condition in proxy server get handler
* swarm: processed with gofmt refers to lash/go-ethereum@90daa7a
* swarm: Added public access method Parse alias to parse
* swarm: processed with gofmt References nolash/go-ethereum@2ec3fd7
* Rename parse to Parse, removed alias
This significantly reduces the dependency closure of ethclient, which no
longer depends on core/vm as of this change.
All uses of vm.Logs are replaced by []*types.Log. NewLog is gone too,
the constructor simply returned a literal.
The run loop, which previously contained custom opcode executes have been
removed and has been simplified to a few checks.
Each operation consists of 4 elements: execution function, gas cost function,
stack validation function and memory size function. The execution function
implements the operation's runtime behaviour, the gas cost function implements
the operation gas costs function and greatly depends on the memory and stack,
the stack validation function validates the stack and makes sure that enough
items can be popped off and pushed on and the memory size function calculates
the memory required for the operation and returns it.
This commit also allows the EVM to go unmetered. This is helpful for offline
operations such as contract calls.
Environment is now a struct (not an interface). This
reduces a lot of tech-debt throughout the codebase where a virtual
machine environment had to be implemented in order to test or run it.
The new environment is suitable to be used en the json tests, core
consensus and light client.
* cmd/bzzd: add missing p2p/discovery flags
* cmd/bzzd: fix two bugs crashing bzzd if bootnodes flag given
* cmd/bzzd: make no swap default, renamed flag bzznoswap->bzzswap
* internal/web3ext: correct methods for bzz IPC module
* cmd/bzzd: ethapi param not mandatory. Warning if no blockchain
* cmd/bzzd: correct default IPC modules in help string
* cmd/utils: fix help description for networkId - add Ropsten
* cmd/bzz, swarm/api, swarm/network: add swarm networkId flag
* cmd/bzzd: change nosync flag to sync and BootTFlag
* core, core/types: refactored tx chain id checking
Refactored explicit chain id checking in to the Sender deriviation method
* cmd/utils, params: define chain ids
This commit implements EIP158 part 1, 2, 3 & 4
1. If an account is empty it's no longer written to the trie. An empty
account is defined as (balance=0, nonce=0, storage=0, code=0).
2. Delete an empty account if it's touched
3. An empty account is redefined as either non-existent or empty.
4. Zero value calls and zero value suicides no longer consume the 25k
reation costs.
params: moved core/config to params
Signed-off-by: Jeffrey Wilcke <jeffrey@ethereum.org>
whisper: project restructured, version 5 introduced
This commits adds a draft version of the new shh v5 protocol.
The new version is not on by default, --shh still selects version 2.
This commit converts the dependency management from Godeps to the vendor
folder, also switching the tool from godep to trash. Since the upstream tool
lacks a few features proposed via a few PRs, until those PRs are merged in
(if), use github.com/karalabe/trash.
You can update dependencies via trash --update.
All dependencies have been updated to their latest version.
Parts of the build system are reworked to drop old notions of Godeps and
invocation of the go vet command so that it doesn't run against the vendor
folder, as that will just blow up during vetting.
The conversion drops OpenCL (and hence GPU mining support) from ethash and our
codebase. The short reasoning is that there's noone to maintain and having
opencl libs in our deps messes up builds as go install ./... tries to build
them, failing with unsatisfied link errors for the C OpenCL deps.
golang.org/x/net/context is not vendored in. We expect it to be fetched by the
user (i.e. using go get). To keep ci.go builds reproducible the package is
"vendored" in build/_vendor.
This implements 1b & 1c of EIP150 by adding a new GasTable which must be
returned from the RuleSet config method. This table is used to determine
the gas prices for the current epoch.
Please note that when the CreateBySuicide gas price is set it is assumed
that we're in the new epoch phase.
In addition this PR will serve as temporary basis while refactorisation
in being done in the EVM64 PR, which will substentially overhaul the gas
price code.
This commit replaces the deep-copy based state revert mechanism with a
linear complexity journal. This commit also hides several internal
StateDB methods to limit the number of ways in which calling code can
use the journal incorrectly.
As usual consultation and bug fixes to the initial implementation were
provided by @karalabe, @obscuren and @Arachnid. Thank you!
The redirect check did not work on Go 1.6 and below because Stat
returned an error for stdout and stderr. In Go 1.7 Stat works on stdout
but doesn't return anything meaningful, causing cmd/geth test failures
because the message is printed to stderr only. Fix it by printing to
stdout only.
This change also deletes generator.go, moving the only interesting line
in it into release.go. The binding has been regenerated with abigen from
develop and solc v0.3.6.
As per GNU GPL requirement I've added the copyright and the license
information as a subcommand as well as a copyright notice when
displaying the help command.
This CL makes several refactors:
- Define a Tracer interface, implementing the `CaptureState` method
- Add the VM environment as the first argument of
`Tracer.CaptureState`
- Rename existing functionality `StructLogger` an make it an
implementation of `Tracer`
- Delete `StructLogCollector` and make `StructLogger` collect the logs
directly
- Change all callers to use the new `StructLogger` where necessary and
extract logs from that.
- Deletes the apparently obsolete and likely nonfunctional 'TraceCall'
from the eth API.
Callers that only wish accumulated logs can use the `StructLogger`
implementation straightforwardly. Callers that wish to efficiently
capture VM traces and operate on them without excessive copying can now
implement the `Tracer` interface to receive VM state at each step and
do with it as they wish.
This CL also removes the accumulation of logs from the vm.Environment;
this was necessary as part of the refactor, but also simplifies it by
removing a responsibility that doesn't directly belong to the
Environment.
Support for legacy version 0.9.x is gone. The compiler version is no
longer cached. Compilation results (and the version) are read directly
from stdout using the --combined-json flag. As a workaround for
ethereum/solidity#651, source code is written to a temporary file before
compilation.
Integration of solc in package ethapi and cmd/abigen is now much simpler
because the compiler wrapper is no longer passed around as a pointer.
Fixes#2806, accidentally
The account manager was previously created by packge cmd/utils as part
of flag processing and then passed down into eth.Ethereum through its
config struct. Since we are starting to create nodes which do not have
eth.Ethereum as a registered service, the code was rearranged to
register the account manager as its own service. Making it a service is
ugly though and it doesn't really fix the root cause: creating nodes
without eth.Ethereum requires duplicating lots of code.
This commit splits utils.MakeSystemNode into three functions, making
creation of other node/service configurations easier. It also moves the
account manager into Node so it can be used by those configurations
without requiring package eth.
This implements a generic approach to enabling soft forks by allowing
anyone to put in hashes of contracts that should not be interacted from.
This will help "The DAO" in their endevour to stop any whithdrawals from
any DAO contract by convincing the mining community to accept their code
hash.
This fixes an issue if you wanted to test out code deployment rather
than running a piece of code with an argument. This solves it by adding
a --create flag that indicates the Create function should be used rather
than the Call function.
This also adds a statedb.commit call so that the proper state can be
dumped when requested using the --dump flag.
We used to have reporting of bad blocks, but it was disabled
before the Frontier release. We need it back because users
are usually unable to provide the full RLP data of a bad
block when it occurs.
A shortcoming of this particular implementation is that the
origin peer is not tracked for blocks received during eth/63
sync. No origin peer info is still better than no report at
all though.
Calls to 'personal' API should be excluded from console history because
they can be called with an account passphrase as argument. The check for
such calls was inverted and didn't work.
geth js stopped the JS runtime after running the first input file
and blocked for pending callbacks. This commit makes it process
all files and enables quitting with Ctrl-C regardless of callbacks.
Error reporting is also improved. If a script fails to load, the error
is printed and includes the backtrace. package jsre now ensures that
otto is aware of the filename, the backtrace will contain them.
Before:
$ geth js bad.js; echo "exit $?"
... log messages ...
exit 0
After:
$ geth js bad.js; echo "exit $?"
... log messages ...
Fatal: JavaScript Error: Invalid number of input parameters
at web3.js:3109:20
at web3.js:4917:15
at web3.js:4960:5
at web3.js:4984:23
at checkWork (bad.js:11:9)
at bad.js:19:1
exit 1
In order to avoid disk thrashing for Accounts and HasAccount,
address->key file mappings are now cached in memory. This makes it no
longer necessary to keep the key address in the file name. The address
of each key is derived from file content instead.
There are minor user-visible changes:
- "geth account list" now reports key file paths alongside the address.
- If multiple keys are present for an address, unlocking by address is
not possible. Users are directed to remove the duplicate files
instead. Unlocking by index is still possible.
- Key files are overwritten written in place when updating the password.
- Manager.Accounts no longer returns an error.
- Manager methods take Account instead of common.Address.
- All uses of Account with unkeyed fields are converted.
The account management API was originally implemented as a thin layer
around crypto.KeyStore, on the grounds that several kinds of key stores
would be implemented later on. It turns out that this won't happen so
KeyStore is a superflous abstraction.
In this commit crypto.KeyStore and everything related to it moves to
package accounts and is unexported.
These changes make prompting behave consistently on all platforms:
* The input buffer is now global.
Buffering was previously set up for each prompt, which can cause weird
behaviour, e.g. when running "geth account update <input.txt" where
input.txt contains three lines. In this case, the first password
prompt would fill up the buffer with all lines and then use only the
first one.
* Print the "unsupported terminal" warning only once.
Now that stdin prompting has global state, we can use it to track
the warning there.
* Work around small liner issues, particularly on Windows.
Prompting didn't work under most of the third-party terminal emulators
on Windows because liner assumes line editing is always available.
rpc: be less restrictive on the request id
rpc: improved documentation
console: upgrade web3.js to version 0.16.0
rpc: cache http connections
rpc: rename wsDomains parameter to wsOrigins
This PR introduces a 10% probability that you'll run the client with the
JIT enabled testing the new client and helps us potentially catch
errors when reported.
This feature is **disabled** for miners (disabling the JIT completely).
The JIT can however be force for miners if they enable both --jitvm and
--forcejit.
Added chain configuration options and write out during genesis database
insertion. If no "config" was found, nothing is written to the database.
Configurations are written on a per genesis base. This means
that any chain (which is identified by it's genesis hash) can have their
own chain settings.
The EVM was previously initialised and created for every CALL, CALLCODE,
DELEGATECALL and CREATE. This PR changes this behaviour so that the same
EVM can be used through the session and beyond as long as the
Environment sticks around.
When attempting to paste very long lines of text the REPL goes
completely fubar, never completing the paste. Removing the multiline
support "fixes" this.
Long lines of text are usually pasted when deploying contracts and as it
stands right now makes creating new contracts from the REPL impossible.
* change gas cost for contract creating txs
* invalidate signature with s value greater than secp256k1 N / 2
* OOG contract creation if not enough gas to store code
* new difficulty adjustment algorithm
* new DELEGATECALL op code
The debug package provides an RPC wrapper for glog settings and the
debugging facilities of the Go runtime. They can be triggered through
both command line flags and the IPC listener.
This removes the burden on a single object to take care of all
validation and state processing. Now instead the validation is done by
the `core.BlockValidator` (`types.Validator`) that takes care of both
header and uncle validation through the `ValidateBlock` method and state
validation through the `ValidateState` method. The state processing is
done by a new object `core.StateProcessor` (`types.Processor`) and
accepts a new state as input and uses that to process the given block's
transactions (and uncles for rewords) to calculate the state root for
the next block (P_n + 1).
There are a bunch of changes required to make this work:
- in miner: allow unregistering agents, fix RemoteAgent.Stop
- in eth/filters: make FilterSystem.Stop not crash
- in rpc/comms: move listen loop to platform-independent code
Fixes#1930. I ran the shell loop there for a few minutes and didn't see
any changes in the memory profile.
* xeth, rpc: implement eth_getNatSpec for tx confirmations
* rename silly docserver -> httpclient
* eth/backend: httpclient now accessible via eth.Ethereum init-d via config.DocRoot
* cmd: introduce separate CLI flag for DocRoot (defaults to homedir)
* common/path: delete unused assetpath func, separate HomeDir func
* lines with leading space are ommitted from history
* exit processed even with whitespace around
* all whitespace lines (not only empty ones) are ignored
add 7 missing commands to admin api autocomplete
registrar: methods now return proper error if reg addresses are not set. fixes#1457
rpc/console: fix personal.newAccount() regression. Now all comms accept interactive password
registrar: add registrar tests for errors
crypto: catch AES decryption error on presale wallet import + fix error msg format. fixes#1580
CLI: improve error message when starting a second instance of geth. fixes#1564
cli/accounts: unlock multiple accounts. fixes#1785
* make unlocking multiple accounts work with inline <() fd
* passwdfile now correctly read only once
* improve logs
* fix CLI help text for unlocking
fix regression with docRoot / admin API
* docRoot/jspath passed to rpc/api ParseApis, which passes onto adminApi
* docRoot field for JS console in order to pass when RPC is (re)started
* improve flag desc for jspath
common/docserver: catch http errors from response
fix rpc/api tests
common/natspec: fix end to end test (skipped because takes 8s)
registrar: fix major regression:
* deploy registrars on frontier
* register HashsReg and UrlHint in GlobalRegistrar.
* set all 3 contract addresses in code
* zero out addresses first in tests
* Moved `vm.Transfer` to `core` package and changed execution to call
`env.Transfer` instead of `core.Transfer` directly.
* core/vm: byte code VM moved to jump table instead of switch
* Moved `vm.Transfer` to `core` package and changed execution to call
`env.Transfer` instead of `core.Transfer` directly.
* Byte code VM now shares the same code as the JITVM
* Renamed Context to Contract
* Changed initialiser of state transition & unexported methods
* Removed the Execution object and refactor `Call`, `CallCode` &
`Create` in to their own functions instead of being methods.
* Removed the hard dep on the state for the VM. The VM now
depends on a Database interface returned by the environment. In the
process the core now depends less on the statedb by usage of the env
* Moved `Log` from package `core/state` to package `core/vm`.
The test genesis block was not written properly, block insertion failed
immediately.
While here, fix the panic when shutting down "geth blocktest" with
Ctrl+C. The signal handler is now installed automatically, causing
ethereum.Stop to crash because everything is already stopped.
Added a `Difference` method to `types.Transactions` which sets the
receiver to the difference of a to b (NOTE: not a **and** b).
Transaction pool subscribes to RemovedTransactionEvent adding back to
those potential missing from the chain.
When a chain re-org occurs remove any transactions that were removed
from the canonical chain during the re-org as well as the receipts that
were generated in the process.
Closes#1746
Changed the version number of geth to 1.2.0 so that dev builds are now properly build (instead of master). Note to self; increase version number to 1.2.1 for our next actual release.
Dev mode enabled some debugging flags such as:
* VM debugging mode
* Simpler proof of work
* Whisper enabled by default
* Datadir to a tmp datadir
* Maxpeers set to 0
* Gas price of 0
* Random listen port
PR #856 broke command line editing by wrapping stdout with a filter that
interprets ANSI escape sequences to fix colored printing on windows.
Implement the printer in Go instead so it can do its own
platform-dependent coloring.
As a nice side effect, the JS console is now noticeably more responsive
when printing results.
Fixes#1608Fixes#1612
* resolver -> common/registrar
* global registrar name registry interface
* add Call to resolver backend interface
* the hashReg and UrlHing contracts now initialised from global registry
* initialization of contracts uniform
* improve errors and more econsistent method names
* common/registrar/ethreg: versioned registrar
* integrate new naming and registrar in natspec
* js console api: setGlobalRegistrar, setHashReg, setUrlHint
* js test TestContract uses mining - tests fixed all pass
* eth/backend: allow PoW test mode (small ethash DAG)
* console jsre refers to resolver.abi/addr,
* cmd/geth/contracts.go moved to common/registrar
* resolver -> common/registrar
* global registrar name registry interface
* add Call to resolver backend interface
* the hashReg and UrlHing contracts now initialised from global registry
* initialization of contracts uniform
* improve errors and more econsistent method names
* common/registrar/ethreg: versioned registrar
* integrate new naming and registrar in natspec
* js console api: setGlobalRegistrar, setHashReg, setUrlHint
* js test TestContract uses mining - tests fixed all pass
* eth/backend: allow PoW test mode (small ethash DAG)
* console jsre refers to resolver.abi/addr,
* cmd/geth/contracts.go moved to common/registrar
The new strategy for interrupts is to handle them explicitly.
Ethereum.Stop is now only called once, even if multiple interrupts
are sent. Interrupting ten times in a row forces a panic.
Fixes#869Fixes#1359
* Miners do now verify their own header, not their state.
* Changed old putTx and putReceipts to be exported
* Moved writing of transactions and receipts out of the block processer
in to the chain manager. Closes#1386
* Miner post ChainHeadEvent & ChainEvent. Closes#1388
* multiple passwords allowed in password file
* split on "\n", sideeffect: chop trailing slashes. fixes common mistake <(echo 'pass')
* remove accounts.Primary method
* do not fall back to primary account for mining
You can set the nonce of the block with `--genesisnonce`. When the
genesis nonce changes and it doesn't match with the first block in your
database it will fail. A new `datadir` must be given if the nonce of the
genesis block changes.
Interrupting import with Ctrl-C could cause database corruption
because the signal wasn't handled. utils.ImportChain now checks
for a queued interrupt on every batch.
This fix applies mostly to unsupported terminals that do not trigger the
special interrupt handling in liner. Supported terminals were covered
because liner.Prompt returns an error if Ctrl-C is pressed.
Some JSRE methods (PrettyPrint, ToVal) bypassed the event loop. All
calls to the JS VM are now wrapped. In order to make this somewhat more
foolproof, the otto VM is now a local variable inside the event loop.
- backend: AutoDAG bool flag passed from cli/eth.Config to ethereum, autoDAG loop started if true
- backend: autoDAG loop start/stop, remove previous DAG
- cli: AutoDAG bool flag, off by default, but automatically ON if mining
- admin jsre: add startAutoDAG stopAutoDAG and makeDAG in miner section
- switch on/off DAG autogeneration when miner started/stopped on console
Péter Szilágyi
Martin Holst Swende
Kurkó Mihály
Bo
ferhat elmas
Jim McDonald
Nick Johnson
ayeowch
Lewis Marshall
cdetrio
Felix Lange
Oli Bye
Miya Chen
Maximilian Meister
Egon Elbre
Felix Lange
Bas van Kervel
necaremus
Jeffrey Wilcke
gluk256
holisticode
bas-vk
Victor Farazdagi
Felföldi Zsolt
Louis Holbrook
Zahoor Mohamed
Valentin Wüstholz
zelig
Shintaro Kaneko
nolash
Maran
Luca Zeug
Aron Fischer
Kenji Siu
xiekeyang
Jeffrey Wilcke
Hellsegga
Matthew Di Ferrante
Yohann LEON
Tosh Camille
Bas van Kervel
Gustav Simonsson
Ramesh Nair
Kobi Gurkan
Ricardo Catalinas Jiménez
Isidoro Ghezzi
Drake Burroughs
caktux
Taylor Gerring
Bas van Kervel