Commit Graph

370 Commits

Author SHA1 Message Date
Felföldi Zsolt c2003ed63b les, les/flowcontrol: improved request serving and flow control (#18230)
This change

- implements concurrent LES request serving even for a single peer.
- replaces the request cost estimation method with a cost table based on
  benchmarks which gives much more consistent results. Until now the
  allowed number of light peers was just a guess which probably contributed
  a lot to the fluctuating quality of available service. Everything related
  to request cost is implemented in a single object, the 'cost tracker'. It
  uses a fixed cost table with a global 'correction factor'. Benchmark code
  is included and can be run at any time to adapt costs to low-level
  implementation changes.
- reimplements flowcontrol.ClientManager in a cleaner and more efficient
  way, with added capabilities: There is now control over bandwidth, which
  allows using the flow control parameters for client prioritization.
  Target utilization over 100 percent is now supported to model concurrent
  request processing. Total serving bandwidth is reduced during block
  processing to prevent database contention.
- implements an RPC API for the LES servers allowing server operators to
  assign priority bandwidth to certain clients and change prioritized
  status even while the client is connected. The new API is meant for
  cases where server operators charge for LES using an off-protocol mechanism.
- adds a unit test for the new client manager.
- adds an end-to-end test using the network simulator that tests bandwidth
  control functions through the new API.
2019-02-26 12:32:48 +01:00
Matthew Halpern fa87929a2f cmd: prefer nil slices over zero-length slices (#19077) 2019-02-15 01:02:11 +02:00
Martin Holst Swende f48da43bae common/fdlimit: cap on MacOS file limits, fixes #18994 (#19035)
* common/fdlimit: cap on MacOS file limits, fixes #18994

* common/fdlimit: fix Maximum-check to respect OPEN_MAX

* common/fdlimit: return error if OPEN_MAX is exceeded in Raise()

* common/fdlimit: goimports

* common/fdlimit: check value after setting fdlimit

* common/fdlimit: make comment a bit more descriptive

* cmd/utils: make fdlimit happy path a bit cleaner
2019-02-12 12:29:05 +02:00
Péter Szilágyi d6225ab846
cmd/utils, eth: relinquish GC cache to read cache in archive mode 2019-02-07 14:36:25 +02:00
Martin Holst Swende 43e8efe895
accounts, eth, clique, signer: support for external signer API (#18079)
* accounts, eth, clique: implement external backend + move sighash calc to backend

* signer: implement account_Version on external API

* accounts/external: enable ipc, add copyright

* accounts, internal, signer: formatting

* node: go fmt

* flags: disallow --dev in combo with --externalsigner

* accounts: remove clique-specific signing method, replace with more generic

* accounts, consensus: formatting + fix error in tests

* signer/core: remove (test-) import cycle

* clique: remove unused import

* accounts: remove CliqueHash and avoid dependency on package crypto

* consensus/clique: unduplicate header encoding
2019-02-05 11:23:57 +01:00
Péter Szilágyi b0ed083ead
cmd, core, params: add support for Goerli 2019-02-04 14:53:12 +02:00
lhendre d88441025f cmd,eth: 16400 Add an option to stop geth once in sync. WIP for light mode (#17321)
* cmd, eth: Added in the flag to step geth once sync based on input

* cmd, eth: 16400 Add an option to stop geth once in sync.

* cmd: 16400 Add an option to stop geth once in sync. WIP

* cmd/geth/main, les/fletcher: added in light mode support

* cmd/geth/main, les/fletcher: Cleaned Comments and code for light mode

* cmd: 16400 Fixed formatting issue and cleaned code

* cmd, eth, les: 16400 Fixed formatting issues

* cmd, eth, les: Performed gofmt to update formatting

* cmd, eth, les: Fixed bugs resulting formatting

* cmd/geth, eth/, les: switched to downloader event

* eth: Fixed styling and gen_config

* eth/: Fix nil error in config file

* cmd/geth: Updated countdown log

* les/fetcher.go: Removed depcreated channel

* eth/downloader.go: Removed deprecated select

* cmd/geth, cmd/utils: Fixed minor issues

* eth: Reverted config files to proper format

* eth: Fixed typo in config file

* cmd/geth, eth/down: Updated code to use header time stamp

* eth/downloader: Changed the time threshold to 10 minutes

* cmd/geth, eth/downloader: Updated downloading event to pass latest header

* cmd/geth: Updated main to use right timer object

* cmd/geth: Removed unused failed event

* cmd/geth: added in correct time field with type assertion

* cmd/geth, cmd/utils: Updated flag to use boolean

* cmd/geth, cmd/utils, eth/downloader: Cleaned up code based on recommendations

* cmd/geth: Removed unneeded import

* cmd/geth, eth/downloader: fixed event field and suggested changes

* cmd/geth, cmd/utils: Updated flag and linting issue
2019-01-30 08:40:36 +01:00
Anton Evangelatov 21acf0bc8d cmd/utils: allow for multiple influxdb tags (#18520)
This PR is replacing the metrics.influxdb.host.tag cmd-line flag with metrics.influxdb.tags - a comma-separated key/value tags, that are passed to the InfluxDB reporter, so that we can index measurements with multiple tags, and not just one host tag.

This will be useful for Swarm, where we want to index measurements not just with the host tag, but also with bzzkey and git commit version (for long-running deployments).
2019-01-29 09:14:24 +01:00
Anton Evangelatov 0a454554ae cmd/utils: allow empty bootnodes flag override (#18509) 2019-01-24 13:02:30 +01:00
b00ris 769657060e les: implement ultralight client (#16904)
For more information about this light client mode, read
https://hackmd.io/s/HJy7jjZpm
2019-01-24 12:18:26 +01:00
Kris Shinn f91312dbdb GraphQL master FF for review (#18445)
* Initial work on a graphql API

* Added receipts, and more transaction fields.

* Finish receipts, add logs

* Add transactionCount to block

* Add types  and .

* Update Block type to be compatible with ethql

* Rename nonce to transactionCount in Account, to be compatible with ethql

* Update transaction, receipt and log to match ethql

* Add  query operator, for a range of blocks

* Added ommerCount to Block

* Add transactionAt and ommerAt to Block

* Added sendRawTransaction mutation

* Add Call and EstimateGas to graphQL API

* Refactored to use hexutil.Bytes instead of HexBytes

* Replace BigNum with hexutil.Big

* Refactor call and estimateGas to use ethapi struct type

* Replace ethgraphql.Address with common.Address

* Replace ethgraphql.Hash with common.Hash

* Converted most quantities to Long instead of Int

* Add support for logs

* Fix bug in runFilter

* Restructured Transaction to work primarily with headers, so uncle data is reported properly

* Add gasPrice API

* Add protocolVersion API

* Add syncing API

* Moved schema into its own source file

* Move some single use args types into anonymous structs

* Add doc-comments

* Fixed backend fetching to use context

* Added (very) basic tests

* Add documentation to the graphql schema

* Fix reversion for formatting of big numbers

* Correct spelling error

* s/BigInt/Long/

* Update common/types.go

* Fixes in response to review

* Fix lint error

* Updated calls on private functions

* Fix typo in graphql.go

* Rollback ethapi breaking changes for graphql support
Co-Authored-By: Arachnid <arachnid@notdot.net>
2019-01-21 15:38:13 +01:00
Martin Holst Swende 83a9a73b89 cmd/geth, core, eth: implement Constantinople override flag (#18273)
* geth/core/eth: implement constantinople override flag

* les: implemnent constantinople override flag for les clients

* cmd/geth, eth, les: fix typo, move flag to experimentals
2018-12-11 14:19:03 +02:00
Péter Szilágyi 31b3334922
cmd/utils, eth: minor polishes on whitelist code 2018-12-10 14:47:01 +02:00
Ryan Schneider 48b70ecff1
cmd, eth: Add support for `--whitelist <blocknum>=<hash>,...` flag
* Rejects peers that respond with a different hash for any of the passed in block numbers.
* Meant for emergency situations when the network forks unexpectedly.
2018-12-10 14:30:06 +02:00
Péter Szilágyi cf62bd2e88
cmd/utils: max out the OS file allowance, don't cap to 2K 2018-11-29 12:47:29 +02:00
Ferenc Szabo 76f5f662cc cmd/swarm: FUSE do not require --ipcpath (#18112)
- Have `${DataDir}/bzzd.ipc` as IPC path default.
- Respect the `--datadir` flag.
- Keep only the global `--ipcpath` flag and drop the local `--ipcpath` flag
  as flags might overwrite each other. (Note: before global `--ipcpath`
  was ignored even if it was set)

fixes ethersphere#795
2018-11-23 01:32:34 +01:00
Péter Szilágyi 434dd5bc00
cmd, core, eth, light, trie: add trie read caching layer 2018-11-15 12:22:13 +02:00
Ryan Schneider cfcc47529d cmd/utils: fix bug when checking for flag value conflicts (#17803) 2018-10-08 17:08:56 +03:00
Felix Lange 30cd5c1854
all: new p2p node representation (#17643)
Package p2p/enode provides a generalized representation of p2p nodes
which can contain arbitrary information in key/value pairs. It is also
the new home for the node database. The "v4" identity scheme is also
moved here from p2p/enr to remove the dependency on Ethereum crypto from
that package.

Record signature handling is changed significantly. The identity scheme
registry is removed and acceptable schemes must be passed to any method
that needs identity. This means records must now be validated explicitly
after decoding.

The enode API is designed to make signature handling easy and safe: most
APIs around the codebase work with enode.Node, which is a wrapper around
a valid record. Going from enr.Record to enode.Node requires a valid
signature.

* p2p/discover: port to p2p/enode

This ports the discovery code to the new node representation in
p2p/enode. The wire protocol is unchanged, this can be considered a
refactoring change. The Kademlia table can now deal with nodes using an
arbitrary identity scheme. This requires a few incompatible API changes:

  - Table.Lookup is not available anymore. It used to take a public key
    as argument because v4 protocol requires one. Its replacement is
    LookupRandom.
  - Table.Resolve takes *enode.Node instead of NodeID. This is also for
    v4 protocol compatibility because nodes cannot be looked up by ID
    alone.
  - Types Node and NodeID are gone. Further commits in the series will be
    fixes all over the the codebase to deal with those removals.

* p2p: port to p2p/enode and discovery changes

This adapts package p2p to the changes in p2p/discover. All uses of
discover.Node and discover.NodeID are replaced by their equivalents from
p2p/enode.

New API is added to retrieve the enode.Node instance of a peer. The
behavior of Server.Self with discovery disabled is improved. It now
tries much harder to report a working IP address, falling back to
127.0.0.1 if no suitable address can be determined through other means.
These changes were needed for tests of other packages later in the
series.

* p2p/simulations, p2p/testing: port to p2p/enode

No surprises here, mostly replacements of discover.Node, discover.NodeID
with their new equivalents. The 'interesting' API changes are:

 - testing.ProtocolSession tracks complete nodes, not just their IDs.
 - adapters.NodeConfig has a new method to create a complete node.

These changes were needed to make swarm tests work.

Note that the NodeID change makes the code incompatible with old
simulation snapshots.

* whisper/whisperv5, whisper/whisperv6: port to p2p/enode

This port was easy because whisper uses []byte for node IDs and
URL strings in the API.

* eth: port to p2p/enode

Again, easy to port because eth uses strings for node IDs and doesn't
care about node information in any way.

* les: port to p2p/enode

Apart from replacing discover.NodeID with enode.ID, most changes are in
the server pool code. It now deals with complete nodes instead
of (Pubkey, IP, Port) triples. The database format is unchanged for now,
but we should probably change it to use the node database later.

* node: port to p2p/enode

This change simply replaces discover.Node and discover.NodeID with their
new equivalents.

* swarm/network: port to p2p/enode

Swarm has its own node address representation, BzzAddr, containing both
an overlay address (the hash of a secp256k1 public key) and an underlay
address (enode:// URL).

There are no changes to the BzzAddr format in this commit, but certain
operations such as creating a BzzAddr from a node ID are now impossible
because node IDs aren't public keys anymore.

Most swarm-related changes in the series remove uses of
NewAddrFromNodeID, replacing it with NewAddr which takes a complete node
as argument. ToOverlayAddr is removed because we can just use the node
ID directly.
2018-09-25 00:59:00 +02:00
gary rong d6254f827b all: protect self-mined block during reorg (#17656) 2018-09-20 15:09:30 +03:00
Guillaume Ballet da29332c5f core/vm: add switches to select evm+ewasm interpreters (#17687)
Interpreter initialization is left to the PRs implementing them.
Options for external interpreters are passed after a colon in the
`--vm.ewasm` and `--vm.evm` switches.
2018-09-20 10:44:35 +03:00
TColl 0e32989a08 cmd/utils: typos in {Miner, MinerLegacy}GasPriceFlag (#17588) 2018-09-10 15:22:34 +03:00
b00ris 8711e2b636 whisper: add light mode check to handshake (#16725) 2018-09-05 10:57:45 +02:00
Péter Szilágyi e8f229b82e
cmd, core, eth, miner, params: configurable gas floor and ceil 2018-08-29 12:40:12 +03:00
gary rong c1c003e4ff consensus, miner: stale block mining support (#17506)
* consensus, miner: stale block supporting

* consensus, miner: refactor seal signature

* cmd, consensus, eth: add miner noverify flag

* cmd, consensus, miner: polish
2018-08-28 16:59:05 +03:00
Péter Szilágyi 92381ee009
cmd, eth: clean up miner startup API, drop noop config field 2018-08-23 14:09:45 +03:00
gary rong af85d8e2b3 cmd, eth: apply default miner recommit setting (#17479) 2018-08-22 09:47:50 +03:00
Péter Szilágyi e0d0e64ce2
cmd, core, miner: add --txpool.locals and priority mining 2018-08-22 09:43:57 +03:00
gary rong b2c644ffb5 cmd, eth, miner: make recommit configurable (#17444)
* cmd, eth, miner: make recommit configurable

* cmd, eth, les, miner: polish a bit

* miner: filter duplicate sealing work

* cmd: remove uncessary conversion

* miner: avoid microptimization in favor of cleaner code
2018-08-21 22:56:54 +03:00
Péter Szilágyi 2a17fe2561
cmd: polish miner flags, deprecate olds, add upgrade path 2018-08-15 11:41:23 +03:00
Péter Szilágyi f0998415ba
cmd, consensus/ethash, eth: miner push notifications 2018-08-10 09:06:59 +03:00
Anton Evangelatov a5d5609e38 build: rename swarm deb package to ethereum-swarm; change swarm deb version from 1.8.x to 0.3.x (#16988)
* build: add support for different package and binary names

* build: bump up copyright date

* build: change default PackageName to empty string

* build, internal, swarm: enhance build/release process

* build: hack ethereum-swarm as a "depends" in deb package

* build/ci: remove redundant variables

* build, cmd, mobile, params, swarm: remove VERSION file; rename Version to VersionMeta;

* internal: remove VERSION() method which reads VERSION file

* build: fix VersionFilePath to Version

* Makefile: remove clean_go_build_cache.sh until it works

* Makefile: revert removal of clean_go_build_cache.sh
2018-07-30 11:56:40 +03:00
a e r t h 021d6fbbbb cmd: prevent accidental invalid commands (#17248)
* cmd: stop parsing bootnodes if one is invalid

* cmd/geth: require valid command as argument (or no arg)
2018-07-26 13:57:20 +03:00
Sarlor 6c412e313c cmd/utils: fix comment typo (#17249)
cmd: Comment error
2018-07-26 10:59:05 +03:00
Kurkó Mihály a9835c1816 cmd, dashboard, log: log collection and exploration (#17097)
* cmd, dashboard, internal, log, node: logging feature

* cmd, dashboard, internal, log: requested changes

* dashboard, vendor: gofmt, govendor, use vendored file watcher

* dashboard, log: gofmt -s -w, goimports

* dashboard, log: gosimple
2018-07-11 10:59:04 +03:00
Wenbiao Zheng 2eedbe799f cmd: typo fixed, isntance -> instance (#17149) 2018-07-09 17:34:59 +03:00
Anton Evangelatov 1990c9e621 cmd/geth: export metrics to InfluxDB (#16979)
* cmd/geth: add flags for metrics export

* cmd/geth: update usage fields for metrics flags

* metrics/influxdb: update reporter logger to adhere to geth logging convention
2018-07-02 15:51:02 +03:00
Jeremy Schlatter 3fb5f3ae11 cmd/utils: fix NetworkId default when -dev is set (#16833)
Prior to this change, when geth was started with `geth -dev -rpc`,
it would report a network id of `1` in response to the `net_version` RPC
request. But the actual network id it used to verify transactions
was `1337`.

This change causes geth instead respond with `1337` to the `net_version`
RPC when geth is started with `geth -dev -rpc`.
2018-06-14 12:31:31 +03:00
Martin Klepsch 852aa143ac cmd/utils: point users to --syncmode under DEPRECATED (#16572)
Indicate that --light and --fast options are replaced by --syncmode
2018-04-27 12:32:06 +03:00
Zhenguo Niu 661f5f3dac cmd/utils: fix help template issue for subcommands (#16351) 2018-04-18 01:50:25 +02:00
Guillaume Ballet 3d013c1939 whisper: some components are still using v5, switch to v6 2018-03-22 15:48:52 +01:00
Felföldi Zsolt 1488fdaf19 cmd/utils: fix maxpeers vs lightpeers logic (#16125) 2018-03-09 11:55:03 +02:00
Kurkó Mihály 704840a8ad cmd, dashboard: use webpack dev server, remove custom assets (#16263)
* cmd, dashboard: remove custom assets, webpack dev server

* dashboard: yarn commands, small fixes
2018-03-08 10:22:21 +02:00
Martin Holst Swende 478143d69a utils: fix #16138 by checking if vhosts flag is set (#16141)
* utils: fix #16138 by checking if vhosts flag is set

* utils,node: fix defaults for rpcvhosts

* node,utils: address review concerns
2018-03-05 13:02:32 +02:00
Martin Holst Swende 589b603a9b rpc: dns rebind protection (#15962)
* cmd,node,rpc: add allowedHosts to prevent dns rebinding attacks

* p2p,node: Fix bug with dumpconfig introduced in r54aeb8e4c0bb9f0e7a6c67258af67df3b266af3d

* rpc: add wildcard support for rpcallowedhosts + go fmt

* cmd/geth, cmd/utils, node, rpc: ignore direct ip(v4/6) addresses in rpc virtual hostnames check

* http, rpc, utils: make vhosts into map, address review concerns

* node: change log messages to use geth standard (not sprintf)

* rpc: fix spelling
2018-02-12 14:52:07 +02:00
Péter Szilágyi 55599ee95d core, trie: intermediate mempool between trie and database (#15857)
This commit reduces database I/O by not writing every state trie to disk.
2018-02-05 17:40:32 +01:00
Felföldi Zsolt c3f238dd53 les: limit LES peer count and improve peer configuration logic (#16010)
* les: limit number of LES connections

* eth, cmd/utils: light vs max peer configuration logic
2018-02-05 15:41:53 +02:00
Martin Holst Swende ec28a58cc1
utils: fix #16006 by not lowering OS ulimit 2018-02-02 09:33:33 +01:00
Felföldi Zsolt c335821479 cmd, params: update discovery v5 bootnodes (#15954) 2018-01-25 12:25:00 +02:00
Felföldi Zsolt 92580d69d3 p2p, p2p/discover, p2p/discv5: implement UDP port sharing (#15200)
This commit affects p2p/discv5 "topic discovery" by running it on
the same UDP port where the old discovery works. This is realized
by giving an "unhandled" packet channel to the old v4 discovery
packet handler where all invalid packets are sent. These packets
are then processed by v5. v5 packets are always invalid when
interpreted by v4 and vice versa. This is ensured by adding one
to the first byte of the packet hash in v5 packets.

DiscoveryV5Bootnodes is also changed to point to new bootnodes
that are implementing the changed packet format with modified
hash. Existing and new v5 bootnodes are both running on different
ports ATM.
2018-01-22 13:38:34 +01:00
Kurkó Mihály 938cf4528a dashboard: deep state update, version in footer (#15837)
* dashboard: footer, deep state update

* dashboard: resolve asset path

* dashboard: remove bundle.js

* dashboard: prevent state update on every reconnection

* dashboard: fix linter issue

* dashboard, cmd: minor UI fix, include commit hash

* remove geth binary

* dashboard: gitCommit renamed to commit

* dashboard: move the geth version to the right, make commit optional

* dashboard: commit limited to 7 characters

* dashboard: limit commit length on client side

* dashboard: run go generate
2018-01-15 11:20:00 +02:00
Ricardo Domingos 56152b31ac common/fdlimit: Move fdlimit files to separate package (#15850)
* common/fdlimit: Move fdlimit files to separate package

When go-ethereum is used as a library the calling program need to set
the FD limit.

This commit extract fdlimit files to a separate package so it can be
used outside of go-ethereum.

* common/fdlimit: Remove FdLimit from functions signature

* common/fdlimit: Rename fdlimit functions
2018-01-11 22:55:21 +02:00
Evangelos Pappas 7a59a9380e cmd/utils: handle git commit a bit safer for user specified strings (#15790)
* cmd/utils/flags.go: Applying a String len guard for the gitCommit param of the NewApp()

* cmd/utils: remove redundant clause in if condition
2018-01-03 18:18:53 +02:00
Péter Szilágyi 6f69cdd109
all: switch gas limits from big.Int to uint64 2018-01-03 14:45:35 +02:00
Péter Szilágyi 46e5583993 cmd/utils, eth: init etherbase from within eth (#15528) 2017-12-09 23:42:23 +01:00
Maximilian Meister 62dc530773 cmd/utils: bootstrap nodes in config file were not respected
Signed-off-by: Maximilian Meister <mmeister@suse.de>
2017-11-26 12:42:51 +01:00
Paul Litvak e4c9fd29a3 cmd/utils: disallow --lightserv in light mode (#15514)
* Disallow --lightserv in light mode

* Reformatted

* cmd/utils: reduce nesting levels a bit
2017-11-24 17:07:21 +02:00
gary rong f14047dae5 cmd, consensus, eth: split ethash related config to it own (#15520)
* cmd, consensus, eth: split ethash related config to it own

* eth, consensus: minor polish

* eth, consenus, console: compress pow testing config field to single one

* consensus, eth: document pow mode
2017-11-24 16:10:27 +02:00
Kurkó Mihály ba62215d9e cmd, dashboard: dashboard using React, Material-UI, Recharts (#15393)
* cmd, dashboard: dashboard using React, Material-UI, Recharts

* cmd, dashboard, metrics: initial proof of concept dashboard

* dashboard: delete blobs

* dashboard: gofmt -s -w .

* dashboard: minor text and code polishes
2017-11-14 19:34:00 +02:00
Péter Szilágyi 6d6a5a9337 cmd, consensus, core, miner: instatx clique for --dev (#15323)
* cmd, consensus, core, miner: instatx clique for --dev

* cmd, consensus, clique: support configurable --dev block times

* cmd, core: allow --dev to use persistent storage too
2017-10-24 13:40:42 +03:00
Péter Szilágyi 35767dfd0c
cmd, eth: separate out FakePeer for future reuse 2017-10-10 15:52:11 +03:00
ayeowch f3c9585f2e
cmd/geth: fix --password typo 2017-09-27 10:28:26 +10:00
Péter Szilágyi b0ca1b67ce
eth: use maxpeers from p2p layer instead of extra config 2017-09-05 19:18:28 +03:00
Oli Bye ebf41d16a0 cmd/geth: fix --nousb typo (#15040) 2017-08-25 16:54:36 +03:00
Miya Chen bf1e263128 core, light: send chain events using event.Feed (#14865) 2017-08-18 12:58:36 +02:00
Péter Szilágyi 4a260dc1f2
cmd: add makecache cmd, use caches during import cmd 2017-08-03 18:39:34 +02:00
Péter Szilágyi 3d32690b54 cmd, core, eth: journal local transactions to disk (#14784)
* core: reduce txpool event loop goroutines and sync structs

* cmd, core, eth: journal local transactions to disk

* core: journal replacement pending transactions too

* core: separate transaction journal from pool
2017-07-28 15:09:39 +02:00
Péter Szilágyi 5e38f7a664
cmd, core: add --txpool.nolocals to disable local price exemptions 2017-07-05 17:06:05 +03:00
Bas van Kervel 7a11e86442 whisper: move flags from whisper package to utils 2017-06-21 10:49:14 +02:00
Bas van Kervel b58a501673 whisperv5: integrate whisper and add whisper RPC simulator 2017-06-15 11:53:15 +02:00
Péter Szilágyi 08959bbc70
cmd, core, eth: configurable txpool parameters 2017-05-29 11:29:46 +03:00
Bas van Kervel a346aedb90
cmd/geth: reorganise help section for new cli flag handling 2017-05-25 09:15:51 +02:00
Péter Szilágyi a2f23ca9b1 cmd, core, eth, miner: remove txpool gas price limits (#14442) 2017-05-16 21:07:27 +02:00
Péter Szilágyi 3b3989de6a
cmd, node: support different bootnodes, fix default light port 2017-05-10 17:51:52 +03:00
Péter Szilágyi ff2c966e7f Merge pull request #14418 from karalabe/rinkeby-flag
cmd, core, params: add --rinkeby flag for fast connectivity
2017-05-04 13:54:02 +03:00
Péter Szilágyi d51a9fd6b7
cmd, core, params: add --rinkeby flag for fast connectivity 2017-05-04 12:36:20 +03:00
Bas van Kervel 502a2bd69f
cmd/geth: reorganise console/attach commands/flags 2017-05-03 14:33:07 +02:00
Péter Szilágyi 181a3309df
cmd/geth, cmd/utils: init/removedb on light/full dbs simultaneously 2017-05-03 13:35:47 +03:00
Bas van Kervel f6c0f76cc5
cmd/geth: reorganise account/wallet command/flags 2017-04-28 14:01:54 +02:00
gluk256 f9be9a2302 whisper: switching to v5 + minor refactoring (#14387) 2017-04-28 11:57:15 +02:00
Péter Szilágyi e61035c5a3
cmd, eth, les, mobile: make networkid uint64 everywhere 2017-04-25 14:53:50 +03:00
Péter Szilágyi 6430e672c9
cmd, node: add --nosub and node.Config.NoUSB to disable hw wallets 2017-04-20 14:01:51 +03:00
bas-vk 5e29f4be93 cmd/utils, node: remove unused solc references and improve RPC config (#14324)
Currently http cors and websocket origins are a comma separated string in the
config object. These are replaced with string arrays that are more expressive in
case of a config file.
2017-04-12 23:04:14 +02:00
Felix Lange 30d706c35e cmd/geth: add --config file flag (#13875)
* p2p/discover, p2p/discv5: add marshaling methods to Node

* p2p/netutil: make Netlist decodable from TOML

* common/math: encode nil HexOrDecimal256 as 0x0

* cmd/geth: add --config file flag

* cmd/geth: add missing license header

* eth: prettify Config again, fix tests

* eth: use gasprice.Config instead of duplicating its fields

* eth/gasprice: hide nil default from dumpconfig output

* cmd/geth: hide genesis block in dumpconfig output

* node: make tests compile

* console: fix tests

* cmd/geth: make TOML keys look exactly like Go struct fields

* p2p: use discovery by default

This makes the zero Config slightly more useful. It also fixes package
node tests because Node detects reuse of the datadir through the
NodeDatabase.

* cmd/geth: make ethstats URL settable through config file

* cmd/faucet: fix configuration

* cmd/geth: dedup attach tests

* eth: add comment for DefaultConfig

* eth: pass downloader.SyncMode in Config

This removes the FastSync, LightSync flags in favour of a more
general SyncMode flag.

* cmd/utils: remove jitvm flags

* cmd/utils: make mutually exclusive flag error prettier

It now reads:

   Fatal: flags --dev, --testnet can't be used at the same time

* p2p: fix typo

* node: add DefaultConfig, use it for geth

* mobile: add missing NoDiscovery option

* cmd/utils: drop MakeNode

This exposed a couple of places that needed to be updated to use
node.DefaultConfig.

* node: fix typo

* eth: make fast sync the default mode

* cmd/utils: remove IPCApiFlag (unused)

* node: remove default IPC path

Set it in the frontends instead.

* cmd/geth: add --syncmode

* cmd/utils: make --ipcdisable and --ipcpath mutually exclusive

* cmd/utils: don't enable WS, HTTP when setting addr

* cmd/utils: fix --identity
2017-04-12 17:27:23 +03:00
Felföldi Zsolt 9aca9e6deb cmd, les, eth, eth/gasprice: using new gas price oracle (#13853)
* cmd, les, eth, eth/gasprice: using new gas price oracle

* eth/gasprice: renamed source file

* eth/gasprice: added security checks for gpo params

* eth/gasprice: fixed naming issues

* eth/gasprice: max limit, maxEmpty
2017-04-06 17:20:42 +03:00
Péter Szilágyi 09777952ee core, consensus: pluggable consensus engines (#3817)
This commit adds pluggable consensus engines to go-ethereum. In short, it
introduces a generic consensus interface, and refactors the entire codebase to
use this interface.
2017-04-05 00:16:29 +02:00
Felix Lange 37dd9086ec core: refactor genesis handling
This commit solves several issues concerning the genesis block:

* Genesis/ChainConfig loading was handled by cmd/geth code. This left
  library users in the cold. They could specify a JSON-encoded
  string and overwrite the config, but didn't get any of the additional
  checks performed by geth.
* Decoding and writing of genesis JSON was conflated in
  WriteGenesisBlock. This made it a lot harder to embed the genesis
  block into the forthcoming config file loader. This commit changes
  things so there is a single Genesis type that represents genesis
  blocks. All uses of Write*Genesis* are changed to use the new type
  instead.
* If the chain config supplied by the user was incompatible with the
  current chain (i.e. the chain had already advanced beyond a scheduled
  fork), it got overwritten. This is not an issue in practice because
  previous forks have always had the highest total difficulty. It might
  matter in the future though. The new code reverts the local chain to
  the point of the fork when upgrading configuration.

The change to genesis block data removes compression library
dependencies from package core.
2017-03-23 15:58:43 +01:00
Péter Szilágyi b7d93500f1 all: finish integrating Go ethash, delete C++ vendor 2017-03-09 15:50:14 +01:00
Péter Szilágyi 023670f6ba cmd, eth, les, node, pow: disk caching and progress reports 2017-03-09 15:50:14 +01:00
Péter Szilágyi 567d41d936 all: swap out the C++ ethash to the pure Go one (mining todo) 2017-03-09 15:50:14 +01:00
Martin Holst Swende 544247c918 * cmd/geth: add --nocompaction flag + multiple import files
* main,import: Add --nocompaction flag + multiple import files

* geth/import: documentation

* import: Added more info to err message

* fix :P
2017-03-08 13:26:19 +02:00
Péter Szilágyi 9184249b39 Logger updates 3 (#3730)
* accounts, cmd, eth, ethdb: port logs over to new system

* ethdb: drop concept of cache distribution between dbs

* eth: fix some log nitpicks to make them nicer
2017-03-02 14:06:16 +01:00
Jeffrey Wilcke 7ff75ac2f2 cmd/utils, core, params: fork all teh things for dev mode (#3697) 2017-02-28 23:18:13 +01:00
Felix Lange 5c8fe28b72 common: move big integer math to common/math (#3699)
* common: remove CurrencyToString

Move denomination values to params instead.

* common: delete dead code

* common: move big integer operations to common/math

This commit consolidates all big integer operations into common/math and
adds tests and documentation.

There should be no change in semantics for BigPow, BigMin, BigMax, S256,
U256, Exp and their behaviour is now locked in by tests.

The BigD, BytesToBig and Bytes2Big functions don't provide additional
value, all uses are replaced by new(big.Int).SetBytes().

BigToBytes is now called PaddedBigBytes, its minimum output size
parameter is now specified as the number of bytes instead of bits. The
single use of this function is in the EVM's MSTORE instruction.

Big and String2Big are replaced by ParseBig, which is slightly stricter.
It previously accepted leading zeros for hexadecimal inputs but treated
decimal inputs as octal if a leading zero digit was present.

ParseUint64 is used in places where String2Big was used to decode a
uint64.

The new functions MustParseBig and MustParseUint64 are now used in many
places where parsing errors were previously ignored.

* common: delete unused big integer variables

* accounts/abi: replace uses of BytesToBig with use of encoding/binary

* common: remove BytesToBig

* common: remove Bytes2Big

* common: remove BigTrue

* cmd/utils: add BigFlag and use it for error-checked integer flags

While here, remove environment variable processing for DirectoryFlag
because we don't use it.

* core: add missing error checks in genesis block parser

* common: remove String2Big

* cmd/evm: use utils.BigFlag

* common/math: check for 256 bit overflow in ParseBig

This is supposed to prevent silent overflow/truncation of values in the
genesis block JSON. Without this check, a genesis block that set a
balance larger than 256 bits would lead to weird behaviour in the VM.

* cmd/utils: fixup import
2017-02-26 22:21:51 +01:00
Péter Szilágyi 1ca20a2697
cmd, whisper/mailserver: revert to utils.Fatalf 2017-02-23 12:16:46 +02:00
Péter Szilágyi d4fd06c3dc
all: blidly swap out glog to our log15, logs need rework 2017-02-23 12:16:44 +02:00
Péter Szilágyi fad5eb0a87
accounts, cmd, eth, internal, miner, node: wallets and HD APIs 2017-02-13 14:00:07 +02:00
Péter Szilágyi 833e4d1319
accounts, cmd, eth, internal, mobile, node: split account backends 2017-02-13 14:00:02 +02:00
Zsolt Felfoldi a390ca5f30 les, cmd/util: disable topic discovery with --nodiscover 2017-01-27 02:52:45 +01:00
Péter Szilágyi d63752ef4d Merge pull request #3579 from bas-vk/natspec
cmd,eth,les,internal: remove natspec support
2017-01-17 14:38:57 +02:00