This PR reduces the amount of work we do when answering header queries, e.g. when a peer
is syncing from us.
For some items, e.g block bodies, when we read the rlp-data from database, we plug it
directly into the response package. We didn't do that for headers, but instead read
headers-rlp, decode to types.Header, and re-encode to rlp. This PR changes that to keep it
in RLP-form as much as possible. When a node is syncing from us, it typically requests 192
contiguous headers. On master it has the following effect:
- For headers not in ancient: 2 db lookups. One for translating hash->number (even though
the request is by number), and another for reading by hash (this latter one is sometimes
cached).
- For headers in ancient: 1 file lookup/syscall for translating hash->number (even though
the request is by number), and another for reading the header itself. After this, it
also performes a hashing of the header, to ensure that the hash is what it expected. In
this PR, I instead move the logic for "give me a sequence of blocks" into the lower
layers, where the database can determine how and what to read from leveldb and/or
ancients.
There are basically four types of requests; three of them are improved this way. The
fourth, by hash going backwards, is more tricky to optimize. However, since we know that
the gap is 0, we can look up by the parentHash, and stlil shave off all the number->hash
lookups.
The gapped collection can be optimized similarly, as a follow-up, at least in three out of
four cases.
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR fixes a special corner case in transaction indexing.
When the chain is rewound by SetHead to a historical point which is even lower than the transaction indexes tail, then system will report Failed to decode block body error all the time, because the relevant blocks are already deleted.
In order to avoid this "non-critical-but-annoying" issue, we can recap the indexing target to head+1(to is excluded, so it means indexing transactions from 0 to head).
* core/vm: Remove interpreter loop interruption check
* core/vm: Unit test for interpreter loop interruption
* core/vm: Check for interpreter loop abort on every jump
* core/vm: Move interpreter.ReadOnly check into the opcode implementations
Also remove the same check from the interpreter inner loop.
* core/vm: Remove obsolete operation.writes flag
* core/vm: Capture fault states in logger
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core/vm: Remove panic added for testing
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core/vm: break loop on any error
* core/vm: move ErrExecutionReverted to opRevert()
* core/vm: use "stop token" to stop the loop
* core/vm: unconditionally pc++ in the loop
* core/vm: set return data in instruction impls
* all: work for eth1/2 transtition
* consensus/beacon, eth: change beacon difficulty to 0
* eth: updates
* all: add terminalBlockDifficulty config, fix rebasing issues
* eth: implemented merge interop spec
* internal/ethapi: update to v1.0.0.alpha.2
This commit updates the code to the new spec, moving payloadId into
it's own object. It also fixes an issue with finalizing an empty blockhash.
It also properly sets the basefee
* all: sync polishes, other fixes + refactors
* core, eth: correct semantics for LeavePoW, EnterPoS
* core: fixed rebasing artifacts
* core: light: performance improvements
* core: use keyed field (f)
* core: eth: fix compilation issues + tests
* eth/catalyst: dbetter error codes
* all: move Merger to consensus/, remove reliance on it in bc
* all: renamed EnterPoS and LeavePoW to ReachTDD and FinalizePoS
* core: make mergelogs a function
* core: use InsertChain instead of InsertBlock
* les: drop merger from lightchain object
* consensus: add merger
* core: recoverAncestors in catalyst mode
* core: fix nitpick
* all: removed merger from beacon, use TTD, nitpicks
* consensus: eth: add docstring, removed unnecessary code duplication
* consensus/beacon: better comment
* all: easy to fix nitpicks by karalabe
* consensus/beacon: verify known headers to be sure
* core: comments
* core: eth: don't drop peers who advertise blocks, nitpicks
* core: never add beacon blocks to the future queue
* core: fixed nitpicks
* consensus/beacon: simplify IsTTDReached check
* consensus/beacon: correct IsTTDReached check
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* all: mv loggers to eth/tracers
* core/vm: minor
* eth/tracers: tmp comment out testStoreCapture
* eth/tracers: uncomment and fix logger test
* eth/tracers: simplify test
* core/vm: re-add license
* core/vm: minor
* rename LogConfig to Config
* cmd, core: add flag --dev.gaslimit to allow configuring initial block gas limit in dev mode
* core: use provided gaslimit
Co-authored-by: Martin Holst Swende <martin@swende.se>
The price limit is supposed to exclude transactions with too low fee
amount. Before EIP-1559, it was sufficient to check the limit against
the gas price of the transaction. After 1559, it is more complicated
because the concept of 'transaction gas price' does not really exist.
When mining, the price limit is used to exclude transactions below a
certain effective fee amount. This change makes it apply the same check
earlier, in tx validation. Transactions below the specified fee amount
cannot enter the pool.
Fixes#23837
This PR offers two more database sub commands for exporting and importing data.
Two exporters are implemented: preimage and snapshot data respectively.
The import command is generic, it can take any data export and import into leveldb.
The data format has a 'magic' for disambiguation, and a version field for future compatibility.
It is because write known block only checks block and state without snapshot, which could lead to gap between newest snapshot and newest block state. However, new blocks which would cause snapshot to become fixed were ignored, since state was already known.
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core: write test showing that TD is not stored properly at genesis
The ToBlock method applies a default value for an empty
difficulty value. This default is not carried over through the Commit
method because the TotalDifficulty database write writes the
original difficulty value (nil) instead of the defaulty value
present on the genesis Block.
Date: 2021-10-22 08:25:32-07:00
Signed-off-by: meows <b5c6@protonmail.com>
* core: write TD value from Block, not original genesis value
This an issue where a default TD value was not written to
the database, resulting in a 0 value TD at genesis.
A test for this issue was provided at 90e3ffd393
Date: 2021-10-22 08:28:00-07:00
Signed-off-by: meows <b5c6@protonmail.com>
* core: fix tests by adding GenesisDifficulty to expected result
See prior two commits.
Date: 2021-10-22 09:16:01-07:00
Signed-off-by: meows <b5c6@protonmail.com>
* les: fix test with genesis change
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR adds a new accessor method to the freezer database. This new view offers a consistent interface, guaranteeing that all individual tables (headers, bodies etc) are all on the same number, and that this number is not changes (added/truncated) while the operation is performing.
* core/state/snapshot: fix BAD BLOCK error when snapshot is generating
* core/state/snapshot: alternative fix for the snapshot generator
* add comments and minor update
Co-authored-by: Martin Holst Swende <martin@swende.se>
ucwong
Alex Beregszaszi
Martin Holst Swende
Péter Szilágyi
rjl493456442
Andrei Maiboroda
Paweł Bylica
Taeik Lim
Marius van der Wijden
Sina Mahmoodi
Jesse Tane
Felix Lange
Ziyuan Zhong(仲梓源)
meowsbits
jwasinger