Commit Graph

647 Commits

Author SHA1 Message Date
Péter Szilágyi 017831dd5b
core, eth: split eth package, implement snap protocol (#21482)
This commit splits the eth package, separating the handling of eth and snap protocols. It also includes the capability to run snap sync (https://github.com/ethereum/devp2p/blob/master/caps/snap.md) , but does not enable it by default. 

Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Martin Holst Swende <martin@swende.se>
2020-12-14 10:27:15 +01:00
Felföldi Zsolt a2795c8055
les: fix nodiscover option (#21906) 2020-12-01 10:03:41 +01:00
Alex Prut 810f9e057d
all: remove redundant conversions and import names (#21903) 2020-11-25 21:00:23 +01:00
Alex Prut c92faee66e
all: simplify nested complexity and if blocks ending with a return statement (#21854)
Changes:

    Simplify nested complexity
    If an if blocks ends with a return statement then remove the else nesting.

Most of the changes has also been reported in golint https://goreportcard.com/report/github.com/ethereum/go-ethereum#golint
2020-11-25 09:24:50 +01:00
gary rong 23524f8900
all: disable recording preimage of trie keys (#21402)
* cmd, core, eth, light, trie: disable recording preimage by default

* core, eth: fix unit tests

* core: fix import

* all: change to nopreimage

* cmd, core, eth, trie: use cache.preimages flag

* cmd: enable preimages for archive node

* cmd/utils, trie: simplify preimage tracking a bit

* core: fix linter

Co-authored-by: Péter Szilágyi <peterke@gmail.com>
2020-11-18 11:51:33 +02:00
Martin Holst Swende f5182c7b9c
utils, params: add yolov2 bootnode 2020-10-23 15:40:48 +02:00
Martin Holst Swende 6487c002f6
all: implement EIP-2929 (gas cost increases for state access opcodes) + yolo-v2 (#21509)
* core/vm, core/state: implement EIP-2929 + YOLOv2

* core/state, core/vm: fix some review concerns

* core/state, core/vm: address review concerns

* core/vm: address review concerns

* core/vm: better documentation

* core/vm: unify sload cost as fully dynamic

* core/vm: fix typo

* core/vm/runtime: fix compilation flaw

* core/vm/runtime: fix renaming-err leftovers

* core/vm: renaming

* params/config: use correct yolov2 chainid for config

* core, params: use a proper new genesis for yolov2

* core/state/tests: golinter nitpicks
2020-10-23 08:26:57 +02:00
Giuseppe Bertone 2a9ea6be87
cmd/geth, cmd/utils: fixed flags name (#21700) 2020-10-13 13:33:10 +02:00
Felix Lange d9890a6a8f
cmd/faucet: enable DNS discovery for known networks (#21636) 2020-10-05 13:50:26 +03:00
Binacs fdb742419e
cmd/clef, cmd/geth: use SplitAndTrim from cmd/utils (#21579) 2020-09-22 23:22:54 +02:00
Marius van der Wijden faba018b29
cmd/utils: use preconfigured testnet flags instead of networkid (#21561)
* cmd/utils: use preconfigured testnet flags instead of networkid

* cmd/utils: shorter description

Co-authored-by: Martin Holst Swende <martin@swende.se>

* Update flags.go

Co-authored-by: Martin Holst Swende <martin@swende.se>
2020-09-16 13:17:50 +02:00
gary rong 328901c24c
cmd, eth: offer maxprice flag for overwritting price cap (#21531)
* cmd, eth: offer maxprice flag for overwritting price cap

* eth: rename default price cap
2020-09-09 18:38:47 +03:00
Guillaume Ballet d54f2f2e5e
whisper: remove whisper (#21487)
* whisper: remove whisper

* Update cmd/geth/config.go

Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>

* cmd/geth: warn on enabling whisper + remove more whisper deps

* mobile: remove all whisper references

Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Martin Holst Swende <martin@swende.se>
2020-09-08 11:47:48 +03:00
Péter Szilágyi 68754f3931
cmd/utils: grant snapshot cache to trie if disabled (#21416)
* cmd/utils: grant snapshot cache to trie if disabled

* eth: fix up default non-mainnet cache distribution
2020-08-06 15:28:31 +03:00
rene c0c01612e9
node: refactor package node (#21105)
This PR significantly changes the APIs for instantiating Ethereum nodes in
a Go program. The new APIs are not backwards-compatible, but we feel that
this is made up for by the much simpler way of registering services on
node.Node. You can find more information and rationale in the design
document: https://gist.github.com/renaynay/5bec2de19fde66f4d04c535fd24f0775.

There is also a new feature in Node's Go API: it is now possible to
register arbitrary handlers on the user-facing HTTP server. In geth, this
facility is used to enable GraphQL.

There is a single minor change relevant for geth users in this PR: The
GraphQL API is no longer available separately from the JSON-RPC HTTP
server. If you want GraphQL, you need to enable it using the
./geth --http --graphql flag combination.

The --graphql.port and --graphql.addr flags are no longer available.
2020-08-03 19:40:46 +02:00
gary rong 93da0cf8a1
cmd, core, eth, light, trie: dump clean cache periodically (#20391)
* cmd, core, eth, light, trie: dump clean cache periodically

* eth: update config

* trie: minor fix

* core, trie: address comments

* eth: remove useless

* trie: print clean cache dump start too

Co-authored-by: Péter Szilágyi <peterke@gmail.com>
2020-07-28 16:30:31 +03:00
meowsbits 4c268e65a0
cmd/utils: implement configurable developer (--dev) account options (#21301)
* geth,utils: implement configurable developer account options

Prior to this change --dev (developer) mode
generated one account with an empty password,
irrespective of existing --password and --miner.etherbase
options.

This change makes --dev mode compatible with these
existing flags.

--dev mode may now be used in conjunction with
--password and --miner.etherbase flags to configure
the developer faucet using an existing keystore or
in creating a new account.

Signed-off-by: meows <b5c6@protonmail.com>

* main: remove key/pass flags from usage developer section

These flags are included already in other sections,
and it is not desired to duplicate them.

They were originally included in this section
along with added support for these flags in the
developer mode.

Signed-off-by: meows <b5c6@protonmail.com>
2020-07-23 06:47:34 +03:00
Péter Szilágyi 9e22e912e3
cmd/utils: reuse existing genesis in persistent dev mode 2020-07-21 15:58:29 +03:00
rene 5b081ab214
cmd/clef: change --rpcport to --http.port and update flags in docs (#21318) 2020-07-14 10:35:32 +02:00
gary rong 6eef141aef
les: historical data garbage collection (#19570)
This change introduces garbage collection for the light client. Historical
chain data is deleted periodically. If you want to disable the GC, use
the --light.nopruning flag.
2020-07-13 11:02:54 +02:00
gary rong 6d8e51ab88
cmd, node: dump empty value config (#21296) 2020-07-06 22:09:30 +02:00
meowsbits 490b380a04
cmd/geth: allow configuring metrics HTTP server on separate endpoint (#21290)
Exposing /debug/metrics and /debug/metrics/prometheus was dependent
on --pprof, which also exposes other HTTP APIs. This change makes it possible
to run the metrics server on an independent endpoint without enabling pprof.
2020-07-03 19:12:22 +02:00
gary rong 61270e5e1c
eth/gasprice: lighter gas price oracle for light client (#20409)
This PR reduces the bandwidth used by the light client to compute the
recommended gas price. The current mechanism for suggesting the price is:

- retrieve recent 20 blocks
- get the lowest gas price of these blocks
- sort the price array and return the middle(60%) one

This works for full nodes, which have all blocks available locally.
However, this is very expensive for the light client because the light
client needs to retrieve block bodies from the network.

The PR changes the default options for light client. With the new config,
the light client only retrieves the two latest blocks, but in order to
collect more sample transactions, the 3 lowest prices are collected from
each block.

This PR also changes the behavior for empty blocks. If the block is empty,
the lastest price is reused for sampling.
2020-07-03 14:50:35 +02:00
Martin Holst Swende 12867d152c
rpc, internal/ethapi: default rpc gascap at 25M + better error message (#21229)
* rpc, internal/ethapi: default rpc gascap at 50M + better error message

* eth,internal: make globalgascap uint64

* core/tests: fix compilation failure

* eth/config: gascap at 25M + minor review concerns
2020-07-01 19:54:21 +02:00
Martin Holst Swende e376d2fb31
cmd/evm: add state transition tool for testing (#20958)
This PR implements the EVM state transition tool, which is intended
to be the replacement for our retesteth client implementation.
Documentation is present in the cmd/evm/README.md file.

Co-authored-by: Felix Lange <fjl@twurst.com>
2020-06-30 10:12:51 +02:00
Binacs dd91c7ce6a
cmd: abstract `getPassPhrase` functions into one (#21219)
* [cmd] Abstract `getPassPhrase` functions into one.

* cmd/ethkey: fix compilation failure

Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
2020-06-30 09:56:40 +02:00
meowsbits c13df14581
utils: fix ineffectual miner config flags (#21271)
Without use of global, these flags didn't actually modify
miner configuration, since we weren't grabbing from the
proper context scope, which should be global (vs. subcommand).

Signed-off-by: meows <b5c6@protonmail.com>
2020-06-30 09:05:25 +02:00
gary rong 56a319b9da
cmd, eth, internal, les: add txfee cap (#21212)
* cmd, eth, internal, les: add gasprice cap

* cmd/utils, eth: add default value for gasprice cap

* all: use txfee cap

* cmd, eth: add fix

* cmd, internal: address comments
2020-06-17 10:46:31 +03:00
Martin Holst Swende 890757f03a
cmd, core, params: inital support for yolo-v1 testnet (#21154)
* core,params,puppeth: inital support for yolo-v1 testnet

* cmd/geth, core: add yolov1 console flag

* cmd, core, params: YoloV1 bakein fixups

Co-authored-by: Péter Szilágyi <peterke@gmail.com>
2020-06-03 12:05:15 +03:00
Felix Lange dbf6b8a797
cmd/utils: fix default DNS discovery configuration (#21124) 2020-05-25 19:50:36 +02:00
Felföldi Zsolt b4a2681120
les, les/lespay: implement new server pool (#20758)
This PR reimplements the light client server pool. It is also a first step
to move certain logic into a new lespay package. This package will contain
the implementation of the lespay token sale functions, the token buying and
selling logic and other components related to peer selection/prioritization
and service quality evaluation. Over the long term this package will be
reusable for incentivizing future protocols.

Since the LES peer logic is now based on enode.Iterator, it can now use
DNS-based fallback discovery to find servers.

This document describes the function of the new components:
https://gist.github.com/zsfelfoldi/3c7ace895234b7b345ab4f71dab102d4
2020-05-22 13:46:34 +02:00
Martin Holst Swende 4535230059
cmd, core, eth: background transaction indexing (#20302)
* cmd, core, eth: init tx lookup in background

* core/rawdb: tiny log fixes to make it clearer what's happening

* core, eth: fix rebase errors

* core/rawdb: make reindexing less generic, but more optimal

* rlp: implement rlp list iterator

* core/rawdb: new implementation of tx indexing/unindex using generic tx iterator and hashing rlp-data

* core/rawdb, cmd/utils: fix review concerns

* cmd/utils: fix merge issue

* core/rawdb: add some log formatting polishes

Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
2020-05-11 18:58:43 +03:00
Marius van der Wijden 930e82d7f4
params, cmd/utils: remove outdated discv5 bootnodes, deprecate flags (#20949)
* params: remove outdated discv5 bootnodes

* cmd/utils: deprecated bootnodesv4/v5 flags
2020-05-11 11:16:32 +03:00
rene c989bca173
cmd/utils: renames flags related to http-rpc server (#20935)
* rpc flags related to starting http server renamed to http

* old rpc flags aliased and still functional

* pprof flags fixed

* renames gpo related flags

* linted

* renamed rpc flags for consistency and clarity

* added warn logs

* added more warn logs for all deprecated flags for consistency

* moves legacy flags to separate file, hides older flags under show-deprecated-flags command

* legacy prefix and moved some more legacy flags to legacy file

* fixed circular import

* added docs

* fixed imports lint error

* added notes about when flags were deprecated

* cmd/utils: group flags by deprecation date + reorder by date,

* modified deprecated comments for consistency, added warn log for --rpc

* making sure deprecated flags are still functional

* show-deprecated-flags command cleaned up

* fixed lint errors

* corrected merge conflict

* IsSet --> GlobalIsSet

* uncategorized flags, if not deprecated, displayed under misc

Co-authored-by: Martin Holst Swende <martin@swende.se>
2020-05-05 11:19:17 +03:00
rene 648b0cb714
cmd, core: remove override muir glacier and override istanbul (#20942) 2020-04-20 12:46:38 +03:00
Martin Holst Swende 6402c42b67
all: simplify and fix database iteration with prefix/start (#20808)
* core/state/snapshot: start fixing disk iterator seek

* ethdb, rawdb, leveldb, memorydb: implement iterators with prefix and start

* les, core/state/snapshot: iterator fixes

* all: remove two iterator methods

* all: rename Iteratee.NewIteratorWith -> NewIterator

* ethdb: fix review concerns
2020-04-15 14:08:53 +03:00
Raw Pong Ghmoa 15540ae992
cmd: deprecate --testnet, use named networks instead (#20852)
* cmd/utils: make goerli the default testnet

* cmd/geth: explicitly rename testnet to ropsten

* core: explicitly rename testnet to ropsten

* params: explicitly rename testnet to ropsten

* cmd: explicitly rename testnet to ropsten

* miner: explicitly rename testnet to ropsten

* mobile: allow for returning the goerli spec

* tests: explicitly rename testnet to ropsten

* docs: update readme to reflect changes to the default testnet

* mobile: allow for configuring goerli and rinkeby nodes

* cmd/geth: revert --testnet back to ropsten and mark as legacy

* cmd/util: mark --testnet flag as deprecated

* docs: update readme to properly reflect the 3 testnets

* cmd/utils: add an explicit deprecation warning on startup

* cmd/utils: swap goerli and ropsten in usage

* cmd/geth: swap goerli and ropsten in usage

* cmd/geth: if running a known preset, log it for convenience

* docs: improve readme on usage of ropsten's testnet datadir

* cmd/utils: check if legacy `testnet` datadir exists for ropsten

* cmd/geth: check for legacy testnet path in console command

* cmd/geth: use switch statement for complex conditions in main

* cmd/geth: move known preset log statement to the very top

* cmd/utils: create new ropsten configurations in the ropsten datadir

* cmd/utils: makedatadir should check for existing testnet dir

* cmd/geth: add legacy testnet flag to the copy db command

* cmd/geth: add legacy testnet flag to the inspect command
2020-04-09 12:09:58 +03:00
Hanjiang Yu 8f05cfa122
cmd, consensus: add option to disable mmap for DAG caches/datasets (#20484)
* cmd, consensus: add option to disable mmap for DAG caches/datasets

* consensus: add benchmarks for mmap with/with lock
2020-03-31 11:44:04 +03:00
Martin Holst Swende 19099421dc
core/state/snapshot: faster account iteration, CLI integration 2020-02-25 12:51:15 +02:00
Péter Szilágyi 351a5903b0
core/rawdb, core/state/snapshot: runtime snapshot generation 2020-02-25 12:51:08 +02:00
Felix Lange 38d1b0cba2
cmd/geth: enable DNS discovery by default (#20660)
* node: expose config in service context

* eth: integrate p2p/dnsdisc

* cmd/geth: add some DNS flags

* eth: remove DNS URLs

* cmd/utils: configure DNS names for testnets

* params: update DNS URLs

* cmd/geth: configure mainnet DNS

* cmd/utils: rename DNS flag and fix flag processing

* cmd/utils: remove debug print

* node: fix test
2020-02-13 15:38:30 +02:00
Martin Holst Swende bc01593afb consensus/ethash, params: eip-2384: bump difficulty bomb (#20347)
* consensus/ethash, params: implement eip-2384: bump difficulty bomb

* params: EIP 2384 compat checks

* consensus, params: add Muir Glacier block number (mainnet,ropsten) + official name

* core/forkid: forkid tests for muir glacier

* params/config: address review concerns

* params, core/forkid: review nitpicks

* cmd/geth,eth,les: add override option for muir glacier

* params: nit fix
2019-12-06 11:36:40 +02:00
zaccoding 23c8c74131 cmd: fix command help messages in modules (#20203) 2019-11-26 11:46:39 +01:00
Felix Lange 689486449d build: use golangci-lint (#20295)
* build: use golangci-lint

This changes build/ci.go to download and run golangci-lint instead
of gometalinter.

* core/state: fix unnecessary conversion

* p2p/simulations: fix lock copying (found by go vet)

* signer/core: fix unnecessary conversions

* crypto/ecies: remove unused function cmpPublic

* core/rawdb: remove unused function print

* core/state: remove unused function xTestFuzzCutter

* core/vm: disable TestWriteExpectedValues in a different way

* core/forkid: remove unused function checksum

* les: remove unused type proofsData

* cmd/utils: remove unused functions prefixedNames, prefixFor

* crypto/bn256: run goimports

* p2p/nat: fix goimports lint issue

* cmd/clef: avoid using unkeyed struct fields

* les: cancel context in testRequest

* rlp: delete unreachable code

* core: gofmt

* internal/build: simplify DownloadFile for Go 1.11 compatibility

* build: remove go test --short flag

* .travis.yml: disable build cache

* whisper/whisperv6: fix ineffectual assignment in TestWhisperIdentityManagement

* .golangci.yml: enable goconst and ineffassign linters

* build: print message when there are no lint issues

* internal/build: refactor download a bit
2019-11-18 10:49:17 +02:00
Felix Lange afe0b65405
dashboard: remove the dashboard (#20279)
This removes the dashboard project. The dashboard was an experimental
browser UI for geth which displayed metrics and chain information in
real time. We are removing it because it has marginal utility and nobody
on the team can maintain it.

Removing the dashboard removes a lot of dependency code and shaves
6 MB off the geth binary size.
2019-11-14 10:04:16 +01:00
Kurkó Mihály 4ea9b62b5c dashboard: send current block to the dashboard client (#19762)
This adds all dashboard changes from the last couple months.
We're about to remove the dashboard, but decided that we should
get all the recent work in first in case anyone wants to pick up this
project later on.

* cmd, dashboard, eth, p2p: send peer info to the dashboard
* dashboard: update npm packages, improve UI, rebase
* dashboard, p2p: remove println, change doc
* cmd, dashboard, eth, p2p: cleanup after review
* dashboard: send current block to the dashboard client
2019-11-13 12:13:13 +01:00
gary rong 028af3457d cmd/utils: fix command line flag resolve (#20167)
In Geth, we have two sources for configuration:
(1) Config file
(2) Command line flag

Basically geth will first resolve config file and then overwrite
configs with command line flags.

This issue is: geth should only overwrite configs if flags are truly
set. So before we apply any flag to configs, `GlobalIsSet` check
is necessary.
2019-10-15 10:19:20 +02:00
SjonHortensius 1611815b8d cmd/utils: reduce light.maxpeers default for clients to 1/10th (#19933)
Currently light.maxpeers is 100 - after this change it's 10 for non-servers.

Fixes #19820
2019-09-03 10:43:35 +02:00
Péter Szilágyi e39b2a2bde
acmd, core, eth, les: support --override.istanbul 2019-08-23 12:09:27 +03:00
SjonHortensius 4d358b9fc0 cmd/utils: customize cli.HelpPrinter to fix alignment (#19956)
This copies cli.printHelp but changes minwidth to 38. Custom flag
code is improved to print the default value using cli.FlagStringer like
all built-in flags do.
2019-08-22 13:32:26 +02:00
gary rong 252150918c cmd, eth: fix dump config issue (#19825)
* eth: fix error when dump config with nil checkpoint

* cmd/utils: ignore default datadir if it's already set.
2019-07-11 14:37:08 +03:00
Péter Szilágyi c705aac826
cmd, eth, les: make les flags conform to dotted style 2019-07-10 09:12:07 +03:00
rjl493456442 c6a9616cfd
cmd: encapsulate les relative cli options 2019-07-10 08:32:26 +03:00
Péter Szilágyi 213690cdfd
cmd, eth, les: fix up ultra light config integration 2019-07-09 20:34:42 +03:00
gary rong 22060611fb cmd/abigen: refactor command line interface (#19797)
* cmd, common: refactor abigen command line interface

* cmd/abigen: address comment
2019-07-08 14:59:07 +02:00
Péter Szilágyi 22411919da
cmd, eth, les, param: drop --override.constantinople 2019-07-02 14:14:59 +03:00
Martin Holst Swende 1da5e0ebb0 core/state, cmd/geth: streaming json output for dump command (#15475)
* core/state, cmd/geth: streaming json output dump cmd + optional code+storage

* dump: add option to continue even if preimages are missing

* core, evm: lint nits

* cmd: use local flags for dump, omit empty code/storage

* core/state: fix state dump test
2019-06-24 17:16:44 +03:00
Péter Szilágyi e3ec77f50e
cmd, graphql, node: graphql flag polishes, les integration 2019-06-20 09:40:26 +03:00
Felix Lange e83c3ccc47
p2p/enode: improve IPv6 support, add ENR text representation (#19663)
* p2p/enr: add entries for for IPv4/IPv6 separation

This adds entry types for "ip6", "udp6", "tcp6" keys. The IP type stays
around because removing it would break a lot of code and force everyone
to care about the distinction.

* p2p/enode: track IPv4 and IPv6 address separately

LocalNode predicts the local node's UDP endpoint and updates the record.
This change makes it predict IPv4 and IPv6 endpoints separately since
they can now be in the record at the same time.

* p2p/enode: implement base64 text format
* all: switch to enode.Parse(...)

This allows passing base64-encoded node records to all the places that
previously accepted enode:// URLs. The URL format is still supported.

* cmd/bootnode, p2p: log node URL instead of ENR

...and return the base64 record in NodeInfo.
2019-06-07 15:31:00 +02:00
Martin Holst Swende 645756cda5
cmd/utils: close quote (#19665) 2019-06-04 21:17:12 +02:00
Guillaume Ballet d97f0372b1 accounts/scwallet: don't error when pcsc socket is missing (#19662)
* scwallet: don't error when pcsc socket is missing

* review feedback

* more review feedback
2019-06-04 18:40:34 +03:00
Guillaume Ballet 7a22da98b9 accounts/scwallet: flag to specify path to smartcard daemon (#19439)
* accounts/scwallet: Add a switch to enable smartcard support

* accounts: change the meaning of the switch

* disable card support in windows until tested
* only activate account if pcscd socket file is present
* the switch is now the path to the socket file

* accounts/scwallet: holiman's review feedback

* accounts/scwallet: send the path to go-pcsclite

* accounts/scwallet: add default, per platform path

* accounts/scwallet: fix error log warning

* accounts/scwallet: update pcsc lib to latest

* accounts/scwallet: use default path from pcsclite

* scwallet: forgot to change switch name

* cmd: minor style cleanups (error handling first, then happy path)
2019-05-31 12:30:28 +03:00
Felföldi Zsolt 58497f46bd
les, les/flowcontrol: implement LES/3 (#19329)
les, les/flowcontrol: implement LES/3
2019-05-30 20:51:13 +02:00
gary rong 37d280da41
core, cmd, vendor: fixes and database inspection tool (#15)
* core, eth: some fixes for freezer

* vendor, core/rawdb, cmd/geth: add db inspector

* core, cmd/utils: check ancient store path forceily

* cmd/geth, common, core/rawdb: a few fixes

* cmd/geth: support windows file rename and fix rename error

* core: support ancient plugin

* core, cmd: streaming file copy

* cmd, consensus, core, tests: keep genesis in leveldb

* core: write txlookup during ancient init

* core: bump database version
2019-05-16 10:39:34 +03:00
Péter Szilágyi 006c21efc7
cmd, core, eth, les, node: chain freezer on top of db rework 2019-05-16 10:39:29 +03:00
C. Brown be4d74f8d2 cmd, internal/build, docker: advertise commit date in unstable build versions (#19522)
* add-date-to unstable

* fields-insteadof-split

* internal/build: support building with missing git

* docker: add git history back to support commit date in version

* internal/build: use PR commits hashes for PR builds
2019-05-08 16:44:28 +03:00
Péter Szilágyi 0758d7fe5c
cmd/utils, node: switch over default peer count to 50 2019-04-25 12:54:33 +03:00
gary rong 6269e5574c miner: polish miner configuration (#19480)
* cmd, eth, miner: disable advance sealing if user require

* cmd, console, miner, les, eth: wrap the miner config

* eth: remove todo

* cmd, miner: revert noadvance flag

The reason for this is: if the transaction execution is even longer
than block time, then this kind of transactions is DoS attack.
2019-04-23 10:08:51 +03:00
Péter Szilágyi d9d60a5a7f
cmd: special case default cache allowance (4GB mainnet, 128MB ligh) 2019-04-12 12:06:43 +03:00
Martin Holst Swende e2f3465e83 eth, les, geth: implement cli-configurable global gas cap for RPC calls (#19401)
* eth, les, geth: implement cli-configurable global gas cap for RPC calls

* graphql, ethapi: place gas cap in DoCall

* ethapi: reformat log message
2019-04-08 14:49:52 +03:00
gary rong d5cae48bae accounts, cmd, internal: disable unlock account on open HTTP (#17037)
* cmd, accounts, internal, node, rpc, signer: insecure unlock protect

* all: strict unlock API by rpc

* cmd/geth: check before printing warning log

* accounts, cmd/geth, internal: tiny polishes
2019-04-04 14:03:10 +03:00
Péter Szilágyi e14f8a408c
Merge pull request #19328 from karalabe/preload
core: prefetch next block state concurrently
2019-04-02 17:03:12 +03:00
William Setzer 72c98dc41f cmd/flags: fix typo in --exitwhensynced flag (#19364)
Corrected error for ExitWhenSyncedFlag, clarifying that the program exits after syncing completes.
2019-04-02 10:40:30 +03:00
Péter Szilágyi ed34a5e08a
cmd, core, eth: support disabling the concurrent state prefetcher 2019-04-01 11:52:11 +03:00
Péter Szilágyi 86989e3fcd
core: split out detailed trie access metrics from insertion time (#19316)
* core: split out detailed trie access metrics from insertion time

* cmd, core, metrics: support expensive optional metrics
2019-03-25 10:01:18 +02:00
Elad df488975bd cmd/swarm: dont connect to bootnodes in tests (#19270)
* cmd/swarm: dont connect to bootnodes in tests

* cmd/utils: check for empty string when parsing enode
2019-03-15 06:20:21 +01:00
Péter Szilágyi 91eec1251c
cmd, core, eth, trie: get rid of trie cache generations (#19262)
* cmd, core, eth, trie: get rid of trie cache generations

* core, trie: get rid of remainder of cache gen boilerplate
2019-03-14 15:25:12 +02:00
Péter Szilágyi 054412e335
all: clean up and proerly abstract database access 2019-03-06 13:35:03 +02:00
Felföldi Zsolt c2003ed63b les, les/flowcontrol: improved request serving and flow control (#18230)
This change

- implements concurrent LES request serving even for a single peer.
- replaces the request cost estimation method with a cost table based on
  benchmarks which gives much more consistent results. Until now the
  allowed number of light peers was just a guess which probably contributed
  a lot to the fluctuating quality of available service. Everything related
  to request cost is implemented in a single object, the 'cost tracker'. It
  uses a fixed cost table with a global 'correction factor'. Benchmark code
  is included and can be run at any time to adapt costs to low-level
  implementation changes.
- reimplements flowcontrol.ClientManager in a cleaner and more efficient
  way, with added capabilities: There is now control over bandwidth, which
  allows using the flow control parameters for client prioritization.
  Target utilization over 100 percent is now supported to model concurrent
  request processing. Total serving bandwidth is reduced during block
  processing to prevent database contention.
- implements an RPC API for the LES servers allowing server operators to
  assign priority bandwidth to certain clients and change prioritized
  status even while the client is connected. The new API is meant for
  cases where server operators charge for LES using an off-protocol mechanism.
- adds a unit test for the new client manager.
- adds an end-to-end test using the network simulator that tests bandwidth
  control functions through the new API.
2019-02-26 12:32:48 +01:00
Matthew Halpern fa87929a2f cmd: prefer nil slices over zero-length slices (#19077) 2019-02-15 01:02:11 +02:00
Martin Holst Swende f48da43bae common/fdlimit: cap on MacOS file limits, fixes #18994 (#19035)
* common/fdlimit: cap on MacOS file limits, fixes #18994

* common/fdlimit: fix Maximum-check to respect OPEN_MAX

* common/fdlimit: return error if OPEN_MAX is exceeded in Raise()

* common/fdlimit: goimports

* common/fdlimit: check value after setting fdlimit

* common/fdlimit: make comment a bit more descriptive

* cmd/utils: make fdlimit happy path a bit cleaner
2019-02-12 12:29:05 +02:00
Péter Szilágyi d6225ab846
cmd/utils, eth: relinquish GC cache to read cache in archive mode 2019-02-07 14:36:25 +02:00
Martin Holst Swende 43e8efe895
accounts, eth, clique, signer: support for external signer API (#18079)
* accounts, eth, clique: implement external backend + move sighash calc to backend

* signer: implement account_Version on external API

* accounts/external: enable ipc, add copyright

* accounts, internal, signer: formatting

* node: go fmt

* flags: disallow --dev in combo with --externalsigner

* accounts: remove clique-specific signing method, replace with more generic

* accounts, consensus: formatting + fix error in tests

* signer/core: remove (test-) import cycle

* clique: remove unused import

* accounts: remove CliqueHash and avoid dependency on package crypto

* consensus/clique: unduplicate header encoding
2019-02-05 11:23:57 +01:00
Péter Szilágyi b0ed083ead
cmd, core, params: add support for Goerli 2019-02-04 14:53:12 +02:00
lhendre d88441025f cmd,eth: 16400 Add an option to stop geth once in sync. WIP for light mode (#17321)
* cmd, eth: Added in the flag to step geth once sync based on input

* cmd, eth: 16400 Add an option to stop geth once in sync.

* cmd: 16400 Add an option to stop geth once in sync. WIP

* cmd/geth/main, les/fletcher: added in light mode support

* cmd/geth/main, les/fletcher: Cleaned Comments and code for light mode

* cmd: 16400 Fixed formatting issue and cleaned code

* cmd, eth, les: 16400 Fixed formatting issues

* cmd, eth, les: Performed gofmt to update formatting

* cmd, eth, les: Fixed bugs resulting formatting

* cmd/geth, eth/, les: switched to downloader event

* eth: Fixed styling and gen_config

* eth/: Fix nil error in config file

* cmd/geth: Updated countdown log

* les/fetcher.go: Removed depcreated channel

* eth/downloader.go: Removed deprecated select

* cmd/geth, cmd/utils: Fixed minor issues

* eth: Reverted config files to proper format

* eth: Fixed typo in config file

* cmd/geth, eth/down: Updated code to use header time stamp

* eth/downloader: Changed the time threshold to 10 minutes

* cmd/geth, eth/downloader: Updated downloading event to pass latest header

* cmd/geth: Updated main to use right timer object

* cmd/geth: Removed unused failed event

* cmd/geth: added in correct time field with type assertion

* cmd/geth, cmd/utils: Updated flag to use boolean

* cmd/geth, cmd/utils, eth/downloader: Cleaned up code based on recommendations

* cmd/geth: Removed unneeded import

* cmd/geth, eth/downloader: fixed event field and suggested changes

* cmd/geth, cmd/utils: Updated flag and linting issue
2019-01-30 08:40:36 +01:00
Anton Evangelatov 21acf0bc8d cmd/utils: allow for multiple influxdb tags (#18520)
This PR is replacing the metrics.influxdb.host.tag cmd-line flag with metrics.influxdb.tags - a comma-separated key/value tags, that are passed to the InfluxDB reporter, so that we can index measurements with multiple tags, and not just one host tag.

This will be useful for Swarm, where we want to index measurements not just with the host tag, but also with bzzkey and git commit version (for long-running deployments).
2019-01-29 09:14:24 +01:00
Anton Evangelatov 0a454554ae cmd/utils: allow empty bootnodes flag override (#18509) 2019-01-24 13:02:30 +01:00
b00ris 769657060e les: implement ultralight client (#16904)
For more information about this light client mode, read
https://hackmd.io/s/HJy7jjZpm
2019-01-24 12:18:26 +01:00
Kris Shinn f91312dbdb GraphQL master FF for review (#18445)
* Initial work on a graphql API

* Added receipts, and more transaction fields.

* Finish receipts, add logs

* Add transactionCount to block

* Add types  and .

* Update Block type to be compatible with ethql

* Rename nonce to transactionCount in Account, to be compatible with ethql

* Update transaction, receipt and log to match ethql

* Add  query operator, for a range of blocks

* Added ommerCount to Block

* Add transactionAt and ommerAt to Block

* Added sendRawTransaction mutation

* Add Call and EstimateGas to graphQL API

* Refactored to use hexutil.Bytes instead of HexBytes

* Replace BigNum with hexutil.Big

* Refactor call and estimateGas to use ethapi struct type

* Replace ethgraphql.Address with common.Address

* Replace ethgraphql.Hash with common.Hash

* Converted most quantities to Long instead of Int

* Add support for logs

* Fix bug in runFilter

* Restructured Transaction to work primarily with headers, so uncle data is reported properly

* Add gasPrice API

* Add protocolVersion API

* Add syncing API

* Moved schema into its own source file

* Move some single use args types into anonymous structs

* Add doc-comments

* Fixed backend fetching to use context

* Added (very) basic tests

* Add documentation to the graphql schema

* Fix reversion for formatting of big numbers

* Correct spelling error

* s/BigInt/Long/

* Update common/types.go

* Fixes in response to review

* Fix lint error

* Updated calls on private functions

* Fix typo in graphql.go

* Rollback ethapi breaking changes for graphql support
Co-Authored-By: Arachnid <arachnid@notdot.net>
2019-01-21 15:38:13 +01:00
Martin Holst Swende 83a9a73b89 cmd/geth, core, eth: implement Constantinople override flag (#18273)
* geth/core/eth: implement constantinople override flag

* les: implemnent constantinople override flag for les clients

* cmd/geth, eth, les: fix typo, move flag to experimentals
2018-12-11 14:19:03 +02:00
Péter Szilágyi 31b3334922
cmd/utils, eth: minor polishes on whitelist code 2018-12-10 14:47:01 +02:00
Ryan Schneider 48b70ecff1
cmd, eth: Add support for `--whitelist <blocknum>=<hash>,...` flag
* Rejects peers that respond with a different hash for any of the passed in block numbers.
* Meant for emergency situations when the network forks unexpectedly.
2018-12-10 14:30:06 +02:00
Péter Szilágyi cf62bd2e88
cmd/utils: max out the OS file allowance, don't cap to 2K 2018-11-29 12:47:29 +02:00
Ferenc Szabo 76f5f662cc cmd/swarm: FUSE do not require --ipcpath (#18112)
- Have `${DataDir}/bzzd.ipc` as IPC path default.
- Respect the `--datadir` flag.
- Keep only the global `--ipcpath` flag and drop the local `--ipcpath` flag
  as flags might overwrite each other. (Note: before global `--ipcpath`
  was ignored even if it was set)

fixes ethersphere#795
2018-11-23 01:32:34 +01:00
Péter Szilágyi 434dd5bc00
cmd, core, eth, light, trie: add trie read caching layer 2018-11-15 12:22:13 +02:00
Corey Lin 1ff152f3a4 rawdb: remove unused parameter for WritePreimages func (#18059)
* rawdb: remove unused parameter for WritePreimages func and modify a
spelling mistake

* rawdb: update the doc for function WritePreimages
2018-11-09 12:51:07 +02:00
Ryan Schneider cfcc47529d cmd/utils: fix bug when checking for flag value conflicts (#17803) 2018-10-08 17:08:56 +03:00
Felix Lange 30cd5c1854
all: new p2p node representation (#17643)
Package p2p/enode provides a generalized representation of p2p nodes
which can contain arbitrary information in key/value pairs. It is also
the new home for the node database. The "v4" identity scheme is also
moved here from p2p/enr to remove the dependency on Ethereum crypto from
that package.

Record signature handling is changed significantly. The identity scheme
registry is removed and acceptable schemes must be passed to any method
that needs identity. This means records must now be validated explicitly
after decoding.

The enode API is designed to make signature handling easy and safe: most
APIs around the codebase work with enode.Node, which is a wrapper around
a valid record. Going from enr.Record to enode.Node requires a valid
signature.

* p2p/discover: port to p2p/enode

This ports the discovery code to the new node representation in
p2p/enode. The wire protocol is unchanged, this can be considered a
refactoring change. The Kademlia table can now deal with nodes using an
arbitrary identity scheme. This requires a few incompatible API changes:

  - Table.Lookup is not available anymore. It used to take a public key
    as argument because v4 protocol requires one. Its replacement is
    LookupRandom.
  - Table.Resolve takes *enode.Node instead of NodeID. This is also for
    v4 protocol compatibility because nodes cannot be looked up by ID
    alone.
  - Types Node and NodeID are gone. Further commits in the series will be
    fixes all over the the codebase to deal with those removals.

* p2p: port to p2p/enode and discovery changes

This adapts package p2p to the changes in p2p/discover. All uses of
discover.Node and discover.NodeID are replaced by their equivalents from
p2p/enode.

New API is added to retrieve the enode.Node instance of a peer. The
behavior of Server.Self with discovery disabled is improved. It now
tries much harder to report a working IP address, falling back to
127.0.0.1 if no suitable address can be determined through other means.
These changes were needed for tests of other packages later in the
series.

* p2p/simulations, p2p/testing: port to p2p/enode

No surprises here, mostly replacements of discover.Node, discover.NodeID
with their new equivalents. The 'interesting' API changes are:

 - testing.ProtocolSession tracks complete nodes, not just their IDs.
 - adapters.NodeConfig has a new method to create a complete node.

These changes were needed to make swarm tests work.

Note that the NodeID change makes the code incompatible with old
simulation snapshots.

* whisper/whisperv5, whisper/whisperv6: port to p2p/enode

This port was easy because whisper uses []byte for node IDs and
URL strings in the API.

* eth: port to p2p/enode

Again, easy to port because eth uses strings for node IDs and doesn't
care about node information in any way.

* les: port to p2p/enode

Apart from replacing discover.NodeID with enode.ID, most changes are in
the server pool code. It now deals with complete nodes instead
of (Pubkey, IP, Port) triples. The database format is unchanged for now,
but we should probably change it to use the node database later.

* node: port to p2p/enode

This change simply replaces discover.Node and discover.NodeID with their
new equivalents.

* swarm/network: port to p2p/enode

Swarm has its own node address representation, BzzAddr, containing both
an overlay address (the hash of a secp256k1 public key) and an underlay
address (enode:// URL).

There are no changes to the BzzAddr format in this commit, but certain
operations such as creating a BzzAddr from a node ID are now impossible
because node IDs aren't public keys anymore.

Most swarm-related changes in the series remove uses of
NewAddrFromNodeID, replacing it with NewAddr which takes a complete node
as argument. ToOverlayAddr is removed because we can just use the node
ID directly.
2018-09-25 00:59:00 +02:00
gary rong d6254f827b all: protect self-mined block during reorg (#17656) 2018-09-20 15:09:30 +03:00
Guillaume Ballet da29332c5f core/vm: add switches to select evm+ewasm interpreters (#17687)
Interpreter initialization is left to the PRs implementing them.
Options for external interpreters are passed after a colon in the
`--vm.ewasm` and `--vm.evm` switches.
2018-09-20 10:44:35 +03:00
TColl 0e32989a08 cmd/utils: typos in {Miner, MinerLegacy}GasPriceFlag (#17588) 2018-09-10 15:22:34 +03:00
b00ris 8711e2b636 whisper: add light mode check to handshake (#16725) 2018-09-05 10:57:45 +02:00
Péter Szilágyi e8f229b82e
cmd, core, eth, miner, params: configurable gas floor and ceil 2018-08-29 12:40:12 +03:00
gary rong c1c003e4ff consensus, miner: stale block mining support (#17506)
* consensus, miner: stale block supporting

* consensus, miner: refactor seal signature

* cmd, consensus, eth: add miner noverify flag

* cmd, consensus, miner: polish
2018-08-28 16:59:05 +03:00
Péter Szilágyi 92381ee009
cmd, eth: clean up miner startup API, drop noop config field 2018-08-23 14:09:45 +03:00
gary rong af85d8e2b3 cmd, eth: apply default miner recommit setting (#17479) 2018-08-22 09:47:50 +03:00
Péter Szilágyi e0d0e64ce2
cmd, core, miner: add --txpool.locals and priority mining 2018-08-22 09:43:57 +03:00
gary rong b2c644ffb5 cmd, eth, miner: make recommit configurable (#17444)
* cmd, eth, miner: make recommit configurable

* cmd, eth, les, miner: polish a bit

* miner: filter duplicate sealing work

* cmd: remove uncessary conversion

* miner: avoid microptimization in favor of cleaner code
2018-08-21 22:56:54 +03:00
Péter Szilágyi 2a17fe2561
cmd: polish miner flags, deprecate olds, add upgrade path 2018-08-15 11:41:23 +03:00
Péter Szilágyi f0998415ba
cmd, consensus/ethash, eth: miner push notifications 2018-08-10 09:06:59 +03:00
Anton Evangelatov a5d5609e38 build: rename swarm deb package to ethereum-swarm; change swarm deb version from 1.8.x to 0.3.x (#16988)
* build: add support for different package and binary names

* build: bump up copyright date

* build: change default PackageName to empty string

* build, internal, swarm: enhance build/release process

* build: hack ethereum-swarm as a "depends" in deb package

* build/ci: remove redundant variables

* build, cmd, mobile, params, swarm: remove VERSION file; rename Version to VersionMeta;

* internal: remove VERSION() method which reads VERSION file

* build: fix VersionFilePath to Version

* Makefile: remove clean_go_build_cache.sh until it works

* Makefile: revert removal of clean_go_build_cache.sh
2018-07-30 11:56:40 +03:00
a e r t h 021d6fbbbb cmd: prevent accidental invalid commands (#17248)
* cmd: stop parsing bootnodes if one is invalid

* cmd/geth: require valid command as argument (or no arg)
2018-07-26 13:57:20 +03:00
Sarlor 6c412e313c cmd/utils: fix comment typo (#17249)
cmd: Comment error
2018-07-26 10:59:05 +03:00
Kurkó Mihály a9835c1816 cmd, dashboard, log: log collection and exploration (#17097)
* cmd, dashboard, internal, log, node: logging feature

* cmd, dashboard, internal, log: requested changes

* dashboard, vendor: gofmt, govendor, use vendored file watcher

* dashboard, log: gofmt -s -w, goimports

* dashboard, log: gosimple
2018-07-11 10:59:04 +03:00
Wenbiao Zheng 2eedbe799f cmd: typo fixed, isntance -> instance (#17149) 2018-07-09 17:34:59 +03:00
Anton Evangelatov 1990c9e621 cmd/geth: export metrics to InfluxDB (#16979)
* cmd/geth: add flags for metrics export

* cmd/geth: update usage fields for metrics flags

* metrics/influxdb: update reporter logger to adhere to geth logging convention
2018-07-02 15:51:02 +03:00
Jeremy Schlatter 3fb5f3ae11 cmd/utils: fix NetworkId default when -dev is set (#16833)
Prior to this change, when geth was started with `geth -dev -rpc`,
it would report a network id of `1` in response to the `net_version` RPC
request. But the actual network id it used to verify transactions
was `1337`.

This change causes geth instead respond with `1337` to the `net_version`
RPC when geth is started with `geth -dev -rpc`.
2018-06-14 12:31:31 +03:00
Péter Szilágyi 6cf0ab38bd
core/rawdb: separate raw database access to own package (#16666) 2018-05-07 14:35:06 +03:00
Martin Klepsch 852aa143ac cmd/utils: point users to --syncmode under DEPRECATED (#16572)
Indicate that --light and --fast options are replaced by --syncmode
2018-04-27 12:32:06 +03:00
Zhenguo Niu 661f5f3dac cmd/utils: fix help template issue for subcommands (#16351) 2018-04-18 01:50:25 +02:00
Guillaume Ballet cf799e5eaa
whisper: switch all remaining components from v5 to v6 2018-03-26 16:36:14 +02:00
Péter Szilágyi 495bdb0c71
cmd: export preimages in RLP, support GZIP, uniform with block export 2018-03-26 14:08:01 +03:00
Guillaume Ballet 3d013c1939 whisper: some components are still using v5, switch to v6 2018-03-22 15:48:52 +01:00
Felföldi Zsolt 1488fdaf19 cmd/utils: fix maxpeers vs lightpeers logic (#16125) 2018-03-09 11:55:03 +02:00
Kurkó Mihály 704840a8ad cmd, dashboard: use webpack dev server, remove custom assets (#16263)
* cmd, dashboard: remove custom assets, webpack dev server

* dashboard: yarn commands, small fixes
2018-03-08 10:22:21 +02:00
Martin Holst Swende 478143d69a utils: fix #16138 by checking if vhosts flag is set (#16141)
* utils: fix #16138 by checking if vhosts flag is set

* utils,node: fix defaults for rpcvhosts

* node,utils: address review concerns
2018-03-05 13:02:32 +02:00
Péter Szilágyi 01507d9b9d
cmd, console: support all termination signals 2018-02-21 15:23:10 +02:00
Martin Holst Swende 589b603a9b rpc: dns rebind protection (#15962)
* cmd,node,rpc: add allowedHosts to prevent dns rebinding attacks

* p2p,node: Fix bug with dumpconfig introduced in r54aeb8e4c0bb9f0e7a6c67258af67df3b266af3d

* rpc: add wildcard support for rpcallowedhosts + go fmt

* cmd/geth, cmd/utils, node, rpc: ignore direct ip(v4/6) addresses in rpc virtual hostnames check

* http, rpc, utils: make vhosts into map, address review concerns

* node: change log messages to use geth standard (not sprintf)

* rpc: fix spelling
2018-02-12 14:52:07 +02:00
Péter Szilágyi 55599ee95d core, trie: intermediate mempool between trie and database (#15857)
This commit reduces database I/O by not writing every state trie to disk.
2018-02-05 17:40:32 +01:00
Felföldi Zsolt c3f238dd53 les: limit LES peer count and improve peer configuration logic (#16010)
* les: limit number of LES connections

* eth, cmd/utils: light vs max peer configuration logic
2018-02-05 15:41:53 +02:00
Martin Holst Swende ec28a58cc1
utils: fix #16006 by not lowering OS ulimit 2018-02-02 09:33:33 +01:00
Felföldi Zsolt c335821479 cmd, params: update discovery v5 bootnodes (#15954) 2018-01-25 12:25:00 +02:00
Felföldi Zsolt 92580d69d3 p2p, p2p/discover, p2p/discv5: implement UDP port sharing (#15200)
This commit affects p2p/discv5 "topic discovery" by running it on
the same UDP port where the old discovery works. This is realized
by giving an "unhandled" packet channel to the old v4 discovery
packet handler where all invalid packets are sent. These packets
are then processed by v5. v5 packets are always invalid when
interpreted by v4 and vice versa. This is ensured by adding one
to the first byte of the packet hash in v5 packets.

DiscoveryV5Bootnodes is also changed to point to new bootnodes
that are implementing the changed packet format with modified
hash. Existing and new v5 bootnodes are both running on different
ports ATM.
2018-01-22 13:38:34 +01:00
Kurkó Mihály 938cf4528a dashboard: deep state update, version in footer (#15837)
* dashboard: footer, deep state update

* dashboard: resolve asset path

* dashboard: remove bundle.js

* dashboard: prevent state update on every reconnection

* dashboard: fix linter issue

* dashboard, cmd: minor UI fix, include commit hash

* remove geth binary

* dashboard: gitCommit renamed to commit

* dashboard: move the geth version to the right, make commit optional

* dashboard: commit limited to 7 characters

* dashboard: limit commit length on client side

* dashboard: run go generate
2018-01-15 11:20:00 +02:00
Ricardo Domingos 56152b31ac common/fdlimit: Move fdlimit files to separate package (#15850)
* common/fdlimit: Move fdlimit files to separate package

When go-ethereum is used as a library the calling program need to set
the FD limit.

This commit extract fdlimit files to a separate package so it can be
used outside of go-ethereum.

* common/fdlimit: Remove FdLimit from functions signature

* common/fdlimit: Rename fdlimit functions
2018-01-11 22:55:21 +02:00
Evangelos Pappas 7a59a9380e cmd/utils: handle git commit a bit safer for user specified strings (#15790)
* cmd/utils/flags.go: Applying a String len guard for the gitCommit param of the NewApp()

* cmd/utils: remove redundant clause in if condition
2018-01-03 18:18:53 +02:00
Péter Szilágyi 6f69cdd109
all: switch gas limits from big.Int to uint64 2018-01-03 14:45:35 +02:00
lash 14852810b4 cmd/utils: add check on fd hard limit, skip test if below target (#15684)
* cmd/utils: Add check on hard limit, skip test if below target

* cmd/utils: Cross platform compatible fd limit test

* cmd/utils: Remove syscall.Rlimit in test

* cmd/utils: comment fd utility method
2017-12-21 15:30:44 +02:00
Péter Szilágyi 46e5583993 cmd/utils, eth: init etherbase from within eth (#15528) 2017-12-09 23:42:23 +01:00
Maximilian Meister 62dc530773 cmd/utils: bootstrap nodes in config file were not respected
Signed-off-by: Maximilian Meister <mmeister@suse.de>
2017-11-26 12:42:51 +01:00
Paul Litvak e4c9fd29a3 cmd/utils: disallow --lightserv in light mode (#15514)
* Disallow --lightserv in light mode

* Reformatted

* cmd/utils: reduce nesting levels a bit
2017-11-24 17:07:21 +02:00
gary rong f14047dae5 cmd, consensus, eth: split ethash related config to it own (#15520)
* cmd, consensus, eth: split ethash related config to it own

* eth, consensus: minor polish

* eth, consenus, console: compress pow testing config field to single one

* consensus, eth: document pow mode
2017-11-24 16:10:27 +02:00
Kurkó Mihály ba62215d9e cmd, dashboard: dashboard using React, Material-UI, Recharts (#15393)
* cmd, dashboard: dashboard using React, Material-UI, Recharts

* cmd, dashboard, metrics: initial proof of concept dashboard

* dashboard: delete blobs

* dashboard: gofmt -s -w .

* dashboard: minor text and code polishes
2017-11-14 19:34:00 +02:00
Péter Szilágyi 6d6a5a9337 cmd, consensus, core, miner: instatx clique for --dev (#15323)
* cmd, consensus, core, miner: instatx clique for --dev

* cmd, consensus, clique: support configurable --dev block times

* cmd, core: allow --dev to use persistent storage too
2017-10-24 13:40:42 +03:00
Péter Szilágyi 35767dfd0c
cmd, eth: separate out FakePeer for future reuse 2017-10-10 15:52:11 +03:00
ayeowch f3c9585f2e
cmd/geth: fix --password typo 2017-09-27 10:28:26 +10:00
Felix Lange 10181b57a9 core, eth/downloader: commit block data using batches (#15115)
* ethdb: add Putter interface and Has method

* ethdb: improve docs and add IdealBatchSize

* ethdb: remove memory batch lock

Batches are not safe for concurrent use.

* core: use ethdb.Putter for Write* functions

This covers the easy cases.

* core/state: simplify StateSync

* trie: optimize local node check

* ethdb: add ValueSize to Batch

* core: optimize HasHeader check

This avoids one random database read get the block number. For many uses
of HasHeader, the expectation is that it's actually there. Using Has
avoids a load + decode of the value.

* core: write fast sync block data in batches

Collect writes into batches up to the ideal size instead of issuing many
small, concurrent writes.

* eth/downloader: commit larger state batches

Collect nodes into a batch up to the ideal size instead of committing
whenever a node is received.

* core: optimize HasBlock check

This avoids a random database read to get the number.

* core: use numberCache in HasHeader

numberCache has higher capacity, increasing the odds of finding the
header without a database lookup.

* core: write imported block data using a batch

Restore batch writes of state and add blocks, tx entries, receipts to
the same batch. The change also simplifies the miner.

This commit also removes posting of logs when a forked block is imported.

* core: fix DB write error handling

* ethdb: use RLock for Has

* core: fix HasBlock comment
2017-09-09 19:03:07 +03:00
Péter Szilágyi b0ca1b67ce
eth: use maxpeers from p2p layer instead of extra config 2017-09-05 19:18:28 +03:00
Oli Bye ebf41d16a0 cmd/geth: fix --nousb typo (#15040) 2017-08-25 16:54:36 +03:00
Miya Chen bf1e263128 core, light: send chain events using event.Feed (#14865) 2017-08-18 12:58:36 +02:00