Added a start/end system where tracer can be notified that processing of some Ethereum system calls is starting processing and also notifies it when the processing has completed.
Doing a start/end for system call will enable tracers to "route" incoming next tracing events to go to a separate bucket than other EVM calls. Those not interested by this fact can simply avoid registering the hooks.
The EVM call is going to be traced normally afterward between the signals provided by those 2 new hooks but outside of a transaction context OnTxStart/End. That something implementors of live tracers will need to be aware of (since only "trx tracers" are not concerned by ProcessBeaconRoot).
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
* core/state, internal/workerpool: parallelize parts of state commit
* core, internal: move workerpool into syncx
* core/state: use errgroups, commit accounts concurrently
* core: resurrect detailed commit timers to almost-accuracy
* all: refactor so NewBlock(..) and WithBody(..) take a types.Body
* core: fixup comments, remove txs != receipts panic
* core/types: add empty withdrawls to body if len == 0
This PR fixes some flaws with the existing tests.
The randomized testing (TestSnapshotRandom) executes a series of steps which modify the state and create journal-events. Later on, we compare the forward-going-states against the backwards-unrolling-journal-states, and check that they are identical.
The "identical" check is performed using various accessors. It turned out that we failed to check some things:
- the accesslist contents
- the transient storage contents
- the 'newContract' flag
- the dirty storage map
This change adds these new checks
Currently our state journal tracks each storage update to a contract, having the ability to revert those changes to the previously set value.
For the very first modification however, it behaves a bit wonky. Reverting the update doesn't actually remove the dirty-ness of the slot, rather leaves it as "change this slot to it's original value". This can cause issues down the line with for example write witnesses needing to gather an unneeded proof.
This PR modifies the storageChange journal entry to not only track the previous value of a slot, but also whether there was any previous value at all set in the current execution context. In essence, the PR changes the semantic of storageChange so it does not simply track storage changes, rather it tracks dirty storage changes, an important distinction for being able to cleanly revert the journal item.
This PR updates the bls contracts from our internal implementation which is an unmaintained fork of the kilic library to the gnark-crypto library that is actively maintained by consensys.
It also updates the gas-costs according to the EIP
This pull request defines a gentrie for snap sync purpose.
The stackTrie is used to generate the merkle tree nodes upon receiving a state batch. Several additional options have been added into stackTrie to handle incomplete states (either missing states before or after).
In this pull request, these options have been relocated from stackTrie to genTrie, which serves as a wrapper for stackTrie specifically for snap sync purposes.
Further, the logic for managing incomplete state has been enhanced in this change. Originally, there are two cases handled:
- boundary node filtering
- internal (covered by extension node) node clearing
This changes adds one more:
- Clearing leftover nodes on the boundaries.
This feature is necessary if there are leftover trie nodes in database, otherwise node inconsistency may break the state healing.
time.After is equivalent to NewTimer(d).C, and does not call Stop if the timer is no longer needed. This can cause memory leaks. This change changes many such occations to use NewTimer instead, and calling Stop once the timer is no longer needed.
* use generic atomic types in tx caches
* use generic atomic types in block caches
* eth/catalyst: avoid copying tx in test
---------
Co-authored-by: lmittmann <lmittmann@users.noreply.github.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This addresses an edge-case (detailed in the code comment) where the computation of the intermediate trie root would force the unnecessary resolution of a hash node. The change makes it so that when we process changes from a block, we first process trie-updates and afterwards process trie-deletions.
Here we add a Go API for running tracing plugins within the main block import process.
As an advanced user of geth, you can now create a Go file in eth/tracers/live/, and within
that file register your custom tracer implementation. Then recompile geth and select your tracer
on the command line. Hooks defined in the tracer will run whenever a block is processed.
The hook system is defined in package core/tracing. It uses a struct with callbacks, instead of
requiring an interface, for several reasons:
- We plan to keep this API stable long-term. The core/tracing hook API does not depend on
on deep geth internals.
- There are a lot of hooks, and tracers will only need some of them. Using a struct allows you
to implement only the hooks you want to actually use.
All existing tracers in eth/tracers/native have been rewritten to use the new hook system.
This change breaks compatibility with the vm.EVMLogger interface that we used to have.
If you are a user of vm.EVMLogger, please migrate to core/tracing, and sorry for breaking
your stuff. But we just couldn't have both the old and new tracing APIs coexist in the EVM.
---------
Co-authored-by: Matthieu Vachon <matthieu.o.vachon@gmail.com>
Co-authored-by: Delweng <delweng@gmail.com>
Co-authored-by: Martin HS <martin@swende.se>
Package filepath implements utility routines for manipulating filename paths in a way compatible with the target operating system-defined file paths.
Package path implements utility routines for manipulating slash-separated paths.
The path package should only be used for paths separated by forward slashes, such as the paths in URLs
* eth: drop support for forward sync triggers and head block packets
* consensus, eth: enforce always merged network
* eth: fix tx looper startup and shutdown
* cmd, core: fix some tests
* core: remove notion of future blocks
* core, eth: drop unused methods and types
As SELF-DESTRUCT opcode is disabled in the cancun fork(unless the
account is created within the same transaction, nothing to delete
in this case). The account will only be deleted in the following
cases:
- The account is created within the same transaction. In this case
the original storage was empty.
- The account is empty(zero nonce, zero balance, zero code) and
is touched within the transaction. Fortunately this kind of accounts
are not-existent on ethereum-mainnet.
All in all, after cancun, we are pretty sure there is no large contract
deletion and we don't need this mechanism for oom protection.
* core/txpool: no need to run rotate if no local txs
Signed-off-by: jsvisa <delweng@gmail.com>
* Revert "core/txpool: no need to run rotate if no local txs"
This reverts commit 17fab17388.
Signed-off-by: jsvisa <delweng@gmail.com>
* use Debug if todo is empty
Signed-off-by: jsvisa <delweng@gmail.com>
---------
Signed-off-by: jsvisa <delweng@gmail.com>
* make blobpool reject blob transactions with fee below the minimum
* core/txpool: some minot nitpick polishes and unified error formats
* core/txpool: do less big.Int constructions with the min blob cap
---------
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
This PR fixes an overflow which can could happen if inconsistent blockchain rules were configured. Additionally, it tries to prevent such inconsistencies from occurring by making sure that merge cannot be enabled unless previous fork(s) are also enabled.
* core/txpool, miner: speed up blob pool pending retrievals
* miner: fix test merge issue
* eth: same same
* core/txpool/blobpool: speed up blobtx creation in benchmark a bit
* core/txpool/blobpool: fix linter
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
This change makes the legacy transaction pool use of `uint256.Int` instead of `big.Int`. The changes are made primarily only on the internal functions of legacypool.
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
This change adds support for blob-transaction in certain API-endpoints, e.g. eth_fillTransaction. A follow-up PR will add support for signing such transactions.
* all: implement era format, add history importer/export
* internal/era/e2store: refactor e2store to provide ReadAt interface
* internal/era/e2store: export HeaderSize
* internal/era: refactor era to use ReadAt interface
* internal/era: elevate anonymous func to named
* cmd/utils: don't store entire era file in-memory during import / export
* internal/era: better abstraction between era and e2store
* cmd/era: properly close era files
* cmd/era: don't let defers stack
* cmd/geth: add description for import-history
* cmd/utils: better bytes buffer
* internal/era: error if accumulator has more records than max allowed
* internal/era: better doc comment
* internal/era/e2store: rm superfluous reader, rm superfluous testcases, add fuzzer
* internal/era: avoid some repetition
* internal/era: simplify clauses
* internal/era: unexport things
* internal/era,cmd/utils,cmd/era: change to iterator interface for reading era entries
* cmd/utils: better defer handling in history test
* internal/era,cmd: add number method to era iterator to get the current block number
* internal/era/e2store: avoid double allocation during write
* internal/era,cmd/utils: fix lint issues
* internal/era: add ReaderAt func so entry value can be read lazily
Co-authored-by: lightclient <lightclient@protonmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* internal/era: improve iterator interface
* internal/era: fix rlp decode of header and correctly read total difficulty
* cmd/era: fix rebase errors
* cmd/era: clearer comments
* cmd,internal: fix comment typos
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core/txpool/blobpool: clean up resurrected junk after a crash
* core/txpool/blobpool: track transaction insertions and rejections
* core/txpool/blobpool: linnnnnnnt
This PR fixes an issues in the new simulated backend. The root cause is the fact that the transaction pool has an internal reset operation that runs on a background thread.
When a new transaction is added to the pool via the RPC, the transaction is added to a non-executable queue and will be moved to its final location on a background thread. If the machine is overloaded (or simply due to timing issues), it can happen that the simulated backend will try to produce the next block, whilst the pool has not yet marked the newly added transaction executable. This will cause the block to not contain the transaction. This is an issue because we want determinism from the simulator: add a tx, mine a block. It should be in there.
The PR fixes it by adding a Sync function to the txpool, which waits for the current reset operation (if any) to finish, and then runs an entire round of reset on top. The new round is needed because resets are only triggered by new head events, so newly added transactions will not trigger the outer resets that we can wait on. The transaction pool would eventually internally do a reset even on transaction addition, but there's no easy way to wait on that and there's no meaningful reason to bubble that across everything. A clean outer reset will at worse be a small noop goroutine.
This change switches from using the `Hasher` interface to add/query the bloomfilter to implementing it as methods.
This significantly reduces the allocations for Search and Rebloom.
This change makes use of uin256 to represent balance in state. It touches primarily upon statedb, stateobject and state processing, trying to avoid changes in transaction pools, core types, rpc and tracers.
This change simplifies the logic for indexing transactions and enhances the UX when transaction is not found by returning more information to users.
Transaction indexing is now considered as a part of the initial sync, and `eth.syncing` will thus be `true` if transaction indexing is not yet finished. API consumers can use the syncing status to determine if the node is ready to serve users.
The code to compute a versioned hash was duplicated a couple times, and also had a small
issue: if we ever change params.BlobTxHashVersion, it will most likely also cause changes
to the actual hash computation. So it's a bit useless to have this constant in params.
EIP-4844 adds a new transaction type for blobs. Users can submit such transactions via `eth_sendRawTransaction`. In this PR we refrain from adding support to `eth_sendTransaction` and in fact it will fail if the user passes in a blob hash.
However since the chain can handle such transactions it makes sense to allow simulating them. E.g. an L2 operator should be able to simulate submitting a rollup blob and updating the L2 state. Most methods that take in a transaction object should recognize blobs. The change boils down to adding `blobVersionedHashes` and `maxFeePerBlobGas` to `TransactionArgs`. In summary:
- `eth_sendTransaction`: will fail for blob txes
- `eth_signTransaction`: will fail for blob txes
The methods that sign txes does not, as of this PR, add support the for new EIP-4844 transaction types. Resuming the summary:
- `eth_sendRawTransaction`: can send blob txes
- `eth_fillTransaction`: will fill in a blob tx. Note: here we simply fill in normal transaction fields + possibly `maxFeePerBlobGas` when blobs are present. One can imagine a more elaborate set-up where users can submit blobs themselves and we fill in proofs and commitments and such. Left for future PRs if desired.
- `eth_call`: can simulate blob messages
- `eth_estimateGas`: blobs have no effect here. They have a separate unit of gas which is not tunable in the transaction.
This pull request improves the condition to check if path state scheme is in use.
Originally, root node presence was used as the indicator if path scheme is used or not. However due to fact that root node will be deleted during the initial snap sync, this condition is no longer useful.
If PersistentStateID is present, it shows that we've already configured for path scheme.
Original problem was caused by #28595, where we made it so that as soon as we start to sync, the root of the disk layer is deleted. That is not wrong per se, but another part of the code uses the "presence of the root" as an init-check for the pathdb. And, since the init-check now failed, the code tried to re-initialize it which failed since a sync was already ongoing.
The total impact being: after a state-sync has begun, if the node for some reason is is shut down, it will refuse to start up again, with the error message: `Fatal: Failed to register the Ethereum service: waiting for sync.`.
This change also modifies how `geth removedb` works, so that the user is prompted for two things: `state data` and `ancient chain`. The former includes both the chaindb aswell as any state history stored in ancients.
---------
Co-authored-by: Martin HS <martin@swende.se>
Here we update the eth and snap protocol test suites with a new test chain,
created by the hivechain tool. The new test chain uses proof-of-stake. As such,
tests using PoW block propagation in the eth protocol are removed. The test suite
now connects to the node under test using the engine API in order to make it
accept transactions.
The snap protocol test suite has been rewritten to output test descriptions and
log requests more verbosely.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This is the fix to issue #27483. A new hiddenBytes() is introduced to calculate the byte size of hidden items in the freezer table. When reporting the size of the freezer table, size of the hidden items will be subtracted from the total size.
---------
Co-authored-by: Yifan <Yifan Wang>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This change implements CommitteeChain which is a key component of the beacon light client. It is a passive data structure that can validate, hold and update a chain of beacon light sync committees and updates, starting from a checkpoint that proves the starting committee through a beacon block hash, header and corresponding state. Once synced to the current sync period, CommitteeChain can also validate signed beacon headers.
The dump after state-test didn't work, the problem was an error, "Already committed", which was silently ignored.
This change re-initialises the state, so the dumping works again.
This PR replaces Geth's logger package (a fork of [log15](https://github.com/inconshreveable/log15)) with an implementation using slog, a logging library included as part of the Go standard library as of Go1.21.
Main changes are as follows:
* removes any log handlers that were unused in the Geth codebase.
* Json, logfmt, and terminal formatters are now slog handlers.
* Verbosity level constants are changed to match slog constant values. Internal translation is done to make this opaque to the user and backwards compatible with existing `--verbosity` and `--vmodule` options.
* `--log.backtraceat` and `--log.debug` are removed.
The external-facing API is largely the same as the existing Geth logger. Logger method signatures remain unchanged.
A small semantic difference is that a `Handler` can only be set once per `Logger` and not changed dynamically. This just means that a new logger must be instantiated every time the handler of the root logger is changed.
----
For users of the `go-ethereum/log` module. If you were using this module for your own project, you will need to change the initialization. If you previously did
```golang
log.Root().SetHandler(log.LvlFilterHandler(log.LvlInfo, log.StreamHandler(os.Stderr, log.TerminalFormat(true))))
```
You now instead need to do
```golang
log.SetDefault(log.NewLogger(log.NewTerminalHandlerWithLevel(os.Stderr, log.LevelInfo, true)))
```
See more about reasoning here: https://github.com/ethereum/go-ethereum/issues/28558#issuecomment-1820606613
* eth/gasestimator: early exit for plain transfer and error allowance
* core, eth/gasestimator: hard guess at a possible required gas
* internal/ethapi: update estimation tests with the error ratio
* eth/gasestimator: I hate you linter
* graphql: fix gas estimation test
---------
Co-authored-by: Oren <orenyomtov@users.noreply.github.com>
There were several problems related to dumping state.
- If a preimage was missing, even if we had set the `OnlyWithAddresses` to `false`, to export them anyway, the way the mapping was constructed (using `common.Address` as key) made the entries get lost anyway. Concerns both state- and blockchain tests.
- Blockchain test execution was not configured to store preimages.
This changes makes it so that the block test executor takes a callback, just like the state test executor already does. This callback can be used to examine the post-execution state, e.g. to aid debugging of test failures.
geth --dev can be used with an existing data directory and genesis block. Since
dev mode only works with PoS, we need to verify that the merge has happened.
Co-authored-by: Felix Lange <fjl@twurst.com>
* rpc: make subscription test faster
reduces time for TestClientSubscriptionChannelClose
from 25 sec to < 1 sec.
* trie: cache trie nodes for faster sanity check
This reduces the time spent on TestIncompleteSyncHash
from ~25s to ~16s.
* core/forkid: speed up validation test
This takes the validation test from > 5s to sub 1 sec
* core/state: improve snapshot test run
brings the time for TestSnapshotRandom from 13s down to 6s
* accounts/keystore: improve keyfile test
This removes some unnecessary waits and reduces the
runtime of TestUpdatedKeyfileContents from 5 to 3 seconds
* trie: remove resolver
* trie: only check ~5% of all trie nodes
This change adds a check to ensure that transactions added to the legacy pool are not treated as 'locals' if the global locals-management has been disabled.
This change makes the pool enforce the --txpool.pricelimit setting.
This PR moves our fuzzers from tests/fuzzers into whatever their respective 'native' package is.
The historical reason why they were placed in an external location, is that when they were based on go-fuzz, they could not be "hidden" via the _test.go prefix. So in order to shove them away from the go-ethereum "production code", they were put aside.
But now we've rewritten them to be based on golang testing, and thus can be brought back. I've left (in tests/) the ones that are not production (bls128381), require non-standard imports (secp requires btcec, bn256 requires gnark/google/cloudflare deps).
This PR also adds a fuzzer for precompiled contracts, because why not.
This PR utilizes a newly rewritten replacement for go-118-fuzz-build, namely gofuzz-shim, which utilises the inputs from the fuzzing engine better.
Hteev Oli
rjl493456442
Guillaume Ballet
Matthieu Vachon
Aaron Chen
Péter Szilágyi
Bin
lightclient
Marius van der Wijden
maskpp
Martin HS
Chris Ziogas
Mario Vega
haoran
Devon Bear
persmor
ucwong
Abirdcfly
Sina M
cui
seayyyy
imalasong
lmittmann
jwasinger
miles
zgfzgf
Haotian
Lee Bousfield
hyhnet
zhiqiangxu
Vie
buddho
yzb
Roberto Bayardo
Delweng
colin
bk
Ng Wei Han
zoereco
Dimitris Apostolou
protolambda
trocher
Darioush Jalali
Felix Lange
Alfie John
cygaar
wangyifan
alex
Felföldi Zsolt
jp-imx