Tests that are crucial to for verifying the verkle testnet functions properly.
---------
Signed-off-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
Co-authored-by: Ignacio Hagopian <jsign.uy@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Martin HS <martin@swende.se>
This PR adds `DeleteRange` to `ethdb.KeyValueWriter`. While range
deletion using an iterator can be really slow, `DeleteRange` is natively
supported by pebble and apparently runs in O(1) time (typically 20-30ms
in my tests for removing hundreds of millions of keys and gigabytes of
data). For leveldb and memorydb an iterator based fallback is
implemented. Note that since the iterator method can be slow and a
database function should not unexpectedly block for a very long time,
the number of deleted keys is limited at 10000 which should ensure that
it does not block for more than a second. ErrTooManyKeys is returned if
the range has only been partially deleted. In this case the caller can
repeat the call until it finally succeeds.
This change makes the trie commit operation concurrent, if the number of changes exceed 100.
Co-authored-by: stevemilk <wangpeculiar@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This PR implements changes related to
[EIP-6800](https://eips.ethereum.org/EIPS/eip-6800) and
[EIP-4762](https://eips.ethereum.org/EIPS/eip-4762) spec updates.
A TL;DR of the changes is that `Version`, `Balance`, `Nonce` and
`CodeSize` are encoded in a single leaf named `BasicData`. For more
details, see the [_Header Values_ table in
EIP-6800](https://eips.ethereum.org/EIPS/eip-6800#header-values).
The motivation for this was simplifying access event patterns, reducing
code complexity, and, as a side effect, saving gas since fewer leaf
nodes must be accessed.
---------
Co-authored-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR adds the bulk verkle witness+proof production at the end of block
production. It reads all data from the tree in one swoop and produces
a verkle proof.
Co-authored-by: Felix Lange <fjl@twurst.com>
This is a performance improvement on the account-creation rollback code
required for the archive node to support verkle. It uses the utility
function `DeleteAtStem` to remove code and account data per-group
instead of doing it leaf by leaf.
It also fixes an index bug, as code is chunked in 31-byte chunks, so
comparing with the code size should use 31 as its stride.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This pull request fixes#30229.
During snap sync, large storage will be split into several pieces and
synchronized concurrently. Unfortunately, the tradeoff is that the respective
merkle trie of each storage chunk will be incomplete due to the incomplete
boundaries. The trie nodes on these boundaries will be discarded, and any
dangling nodes on disk will also be removed if they fall on these paths,
ensuring the state healer won't be blocked.
However, the dangling account trie nodes on the path from the root to the
associated account are left untouched. This means the dangling account trie
nodes could potentially stop the state healing and break the assumption that the
entire subtrie should exist if the subtrie root exists. We should consider the
account trie node as the ancestor of the corresponding storage trie node.
In the scenarios described in the above ticket, the state corruption could occur
if there is a dangling account trie node while some storage trie nodes are
removed due to synchronization redo.
The fixing idea is pretty straightforward, the trie nodes on the path from root
to account should all be explicitly removed if an incomplete storage trie
occurs. Therefore, a `delete` operation has been added into `gentrie` to
explicitly clear the account along with all nodes on this path. The special
thing is that it's a cross-trie clearing. In theory, there may be a dangling
node at any position on this account key and we have to clear all of them.
* all: add stateless verifications
* all: simplify witness and integrate it into live geth
---------
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* avoid unnecessary copy
* delete the never used function ProofList
* eth/protocols/snap, trie/trienode: polish the code
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
* cmd/geth, ethdb/pebble: polish method naming and code comment
* implement db stat for pebble
* cmd, core, ethdb, internal, trie: remove db property selector
* cmd, core, ethdb: fix function description
---------
Co-authored-by: prpeh <prpeh@proton.me>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This pull request fixes the pre-order trie traversal by defining
a more accurate iterator order and path comparison rule.
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This pull request defines a gentrie for snap sync purpose.
The stackTrie is used to generate the merkle tree nodes upon receiving a state batch. Several additional options have been added into stackTrie to handle incomplete states (either missing states before or after).
In this pull request, these options have been relocated from stackTrie to genTrie, which serves as a wrapper for stackTrie specifically for snap sync purposes.
Further, the logic for managing incomplete state has been enhanced in this change. Originally, there are two cases handled:
- boundary node filtering
- internal (covered by extension node) node clearing
This changes adds one more:
- Clearing leftover nodes on the boundaries.
This feature is necessary if there are leftover trie nodes in database, otherwise node inconsistency may break the state healing.
As SELF-DESTRUCT opcode is disabled in the cancun fork(unless the
account is created within the same transaction, nothing to delete
in this case). The account will only be deleted in the following
cases:
- The account is created within the same transaction. In this case
the original storage was empty.
- The account is empty(zero nonce, zero balance, zero code) and
is touched within the transaction. Fortunately this kind of accounts
are not-existent on ethereum-mainnet.
All in all, after cancun, we are pretty sure there is no large contract
deletion and we don't need this mechanism for oom protection.
This change makes use of uin256 to represent balance in state. It touches primarily upon statedb, stateobject and state processing, trying to avoid changes in transaction pools, core types, rpc and tracers.
Original problem was caused by #28595, where we made it so that as soon as we start to sync, the root of the disk layer is deleted. That is not wrong per se, but another part of the code uses the "presence of the root" as an init-check for the pathdb. And, since the init-check now failed, the code tried to re-initialize it which failed since a sync was already ongoing.
The total impact being: after a state-sync has begun, if the node for some reason is is shut down, it will refuse to start up again, with the error message: `Fatal: Failed to register the Ethereum service: waiting for sync.`.
This change also modifies how `geth removedb` works, so that the user is prompted for two things: `state data` and `ancient chain`. The former includes both the chaindb aswell as any state history stored in ancients.
---------
Co-authored-by: Martin HS <martin@swende.se>
This fixes a database corruption issue that could occur during state healing.
When sync is aborted while certain modifications were already committed, and a
reorg occurs, the database would contain incorrect trie nodes stored by path.
These nodes need to detected/deleted in order to obtain a complete and fully correct state
after state healing.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Add read locking of db lock around access to dirties cache in hashdb.Database to prevent
data race versus hashdb.Database.dereference which can modify the dirities map by deleting
an item.
Fixes#28541
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
* rpc: make subscription test faster
reduces time for TestClientSubscriptionChannelClose
from 25 sec to < 1 sec.
* trie: cache trie nodes for faster sanity check
This reduces the time spent on TestIncompleteSyncHash
from ~25s to ~16s.
* core/forkid: speed up validation test
This takes the validation test from > 5s to sub 1 sec
* core/state: improve snapshot test run
brings the time for TestSnapshotRandom from 13s down to 6s
* accounts/keystore: improve keyfile test
This removes some unnecessary waits and reduces the
runtime of TestUpdatedKeyfileContents from 5 to 3 seconds
* trie: remove resolver
* trie: only check ~5% of all trie nodes
* trie: use pooling of iterator states in iterator
The node iterator burns through a lot of memory while iterating a trie, and a lot of
that can be avoided by using a fairly small pool (max 40 items).
name old time/op new time/op delta
Iterator-8 6.22ms ± 3% 5.40ms ± 6% -13.18% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
Iterator-8 2.36MB ± 0% 1.67MB ± 0% -29.23% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
Iterator-8 37.0k ± 0% 29.8k ± 0% ~ (p=0.079 n=4+5)
* ethdb/memorydb: avoid one copying of key
By making the transformation from []byte to string at an earlier point,
we save an allocation which otherwise happens later on.
name old time/op new time/op delta
BatchAllocs-8 412µs ± 6% 382µs ± 2% -7.18% (p=0.016 n=5+4)
name old alloc/op new alloc/op delta
BatchAllocs-8 480kB ± 0% 490kB ± 0% +1.93% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
BatchAllocs-8 3.03k ± 0% 2.03k ± 0% -32.98% (p=0.008 n=5+5)
Guillaume Ballet
Felföldi Zsolt
rjl493456442
Martin HS
maskpp
Ignacio Hagopian
Sina M
Halimao
jwasinger
Ha DANG
Roy Crihfield
cocoyeal
Aaron Chen
qcrao
haoran
cui
yzb
Dimitris Apostolou
Maciej Kulawik
Ng Wei Han
Marius van der Wijden