Adding a space beween function opOrigin() and opcCaller() in instruciton.go.
Adding a space beween function opkeccak256() and opAddress() in instruciton.go.
When MatcherSession encounters an error, it attempts to close the session.
Closing waits for all goroutines to finish, including the 'distributor'. However, the
distributor will not exit until all requests have returned.
This patch fixes the issue by delivering the (empty) result to the distributor
before calling Close().
* cmd/evm: improve flags handling
This fixes some issues with flags in cmd/evm. The supported flags did not
actually show up in help output because they weren't categorized. I'm also
adding the VM-related flags to the run command here so they can be given
after the subcommand name. So it can be run like this now:
./evm run --code 6001 --debug
* cmd/evm: enable all forks by default in run command
The default genesis was just empty with no forks at all, which is annoying because
contracts will be relying on opcodes introduced in a fork. So this changes the default to
have all forks enabled.
* core/asm: fix some issues in the assembler
This fixes minor bugs in the old assembler:
- It is now possible to have comments on the same line as an instruction.
- Errors for invalid numbers in the jump instruction are reported better
- Line numbers in errors were off by one
* rlp/rlpgen: remove build tag
This tag was supposed to prevent unstable output when types reference each other. Imagine
there are two struct types A and B, where a reference to type B is in A. If I run rlpgen
on type B first, and then on type A, the generator will see the B.EncodeRLP method and
call it. However, if I run rlpgen on type A first, it will inline the encoding of B.
The solution I chose for the initial release of rlpgen was to just ignore methods
generated by rlpgen using a build tag. But there is a problem with this: if any code in
the package calls EncodeRLP explicitly, the package can't be loaded without errors anymore
in rlpgen, because the loader ignores it. Would be nice if there was a way to just make it
ignore invalid functions during type checking (they're not necessary for rlpgen), but
golang.org/x/tools/go/packages does not provide a way of ignoring them.
Luckily, the types we use rlpgen with do not reference each other right now, so we can
just remove the build tags for now.
This change includes a lot of things, listed below.
### Split up interfaces, write vs read
The interfaces have been split up into one write-interface and one read-interface, with `Snapshot` being the gateway from write to read. This simplifies the semantics _a lot_.
Example of splitting up an interface into one readonly 'snapshot' part, and one updatable writeonly part:
```golang
type MeterSnapshot interface {
Count() int64
Rate1() float64
Rate5() float64
Rate15() float64
RateMean() float64
}
// Meters count events to produce exponentially-weighted moving average rates
// at one-, five-, and fifteen-minutes and a mean rate.
type Meter interface {
Mark(int64)
Snapshot() MeterSnapshot
Stop()
}
```
### A note about concurrency
This PR makes the concurrency model clearer. We have actual meters and snapshot of meters. The `meter` is the thing which can be accessed from the registry, and updates can be made to it.
- For all `meters`, (`Gauge`, `Timer` etc), it is assumed that they are accessed by different threads, making updates. Therefore, all `meters` update-methods (`Inc`, `Add`, `Update`, `Clear` etc) need to be concurrency-safe.
- All `meters` have a `Snapshot()` method. This method is _usually_ called from one thread, a backend-exporter. But it's fully possible to have several exporters simultaneously: therefore this method should also be concurrency-safe.
TLDR: `meter`s are accessible via registry, all their methods must be concurrency-safe.
For all `Snapshot`s, it is assumed that an individual exporter-thread has obtained a `meter` from the registry, and called the `Snapshot` method to obtain a readonly snapshot. This snapshot is _not_ guaranteed to be concurrency-safe. There's no need for a snapshot to be concurrency-safe, since exporters should not share snapshots.
Note, though: that by happenstance a lot of the snapshots _are_ concurrency-safe, being unmutable minimal representations of a value. Only the more complex ones are _not_ threadsafe, those that lazily calculate things like `Variance()`, `Mean()`.
Example of how a background exporter typically works, obtaining the snapshot and sequentially accessing the non-threadsafe methods in it:
```golang
ms := metric.Snapshot()
...
fields := map[string]interface{}{
"count": ms.Count(),
"max": ms.Max(),
"mean": ms.Mean(),
"min": ms.Min(),
"stddev": ms.StdDev(),
"variance": ms.Variance(),
```
TLDR: `snapshots` are not guaranteed to be concurrency-safe (but often are).
### Sample changes
I also changed the `Sample` type: previously, it iterated the samples fully every time `Mean()`,`Sum()`, `Min()` or `Max()` was invoked. Since we now have readonly base data, we can just iterate it once, in the constructor, and set all four values at once.
The same thing has been done for runtimehistogram.
### ResettingTimer API
Back when ResettingTImer was implemented, as part of https://github.com/ethereum/go-ethereum/pull/15910, Anton implemented a `Percentiles` on the new type. However, the method did not conform to the other existing types which also had a `Percentiles`.
1. The existing ones, on input, took `0.5` to mean `50%`. Anton used `50` to mean `50%`.
2. The existing ones returned `float64` outputs, thus interpolating between values. A value-set of `0, 10`, at `50%` would return `5`, whereas Anton's would return either `0` or `10`.
This PR removes the 'new' version, and uses only the 'legacy' percentiles, also for the ResettingTimer type.
The resetting timer snapshot was also defined so that it would expose the internal values. This has been removed, and getters for `Max, Min, Mean` have been added instead.
### Unexport types
A lot of types were exported, but do not need to be. This PR unexports quite a lot of them.
On ACD 163, it was agreed to bump the target and max blob values from `2/4` to `3/6` for future devnets until we could decide on final mainnet number. This change contains said update, making master pass all the hive tests. The final decision for mainnet cancun is still to be made.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
* core/forkid: skip genesis forks by time
* core/forkid: add comment about skipping non-zero fork times
* core/forkid: skip all time based forks in genesis using loop
* core/forkid: simplify logic for dropping time-based forks
This chang creates a GaugeInfo metrics type for registering informational (textual) metrics, e.g. geth version number. It also improves the testing for backend-exporters, and uses a shared subpackage in 'internal' to provide sample datasets and ordered registry.
Implements #21783
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
This changes implements faster post-selfdestruct iteration of storage slots for deletion, by using snapshot-storage+stacktrie to recover the trienodes to be deleted. This mechanism is only implemented for path-based schema.
For hash-based schema, the entire post-selfdestruct storage iteration is skipped, with this change, since hash-based does not actually perform deletion anyway.
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR makes EIP-4788 work in the engine API and miner. It also fixes some bugs related to
EIP-4844 block processing and mining. Changes in detail:
- Header.BeaconRoot has been renamed to ParentBeaconRoot.
- The engine API now implements forkchoiceUpdatedV3
- newPayloadV3 method has been updated with the parentBeaconBlockRoot parameter
- beacon root is now applied to new blocks in miner
- For EIP-4844, block creation now updates the blobGasUsed field of the header
Just some minor optimizations I figured out a while ago. By using ReadBytes instead of
Bytes on the rlp stream, we can save the allocation of a temporary buffer for the typed tx
payload.
If kind == rlp.Byte, the size reported by Stream.Kind will be zero, but we need a buffer
of size 1 for ReadBytes. Since typed txs always have to be longer than 1 byte, we can just
return an error for kind == rlp.Byte.
There is a also a small change for Log: since the first three fields of Log are the ones that
should appear in the canon encoding, we can simply ignore the remaining fields via
struct tag. Doing this removes an indirection through the rlpLog type.
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
This change implements "EIP 4788 : Beacon block root in the EVM". It implements version-2 of EPI-4788, main difference being that the contract is an actual contract rather than a precompile, as in #27289.
Currently, we trigger the logic to (un)index transactions when the node receives a new
block. However, in some cases the node may not receive new blocks (eg, when the Geth node
is configured without peer discovery, or when it acts as an RPC node for historical-only
data).
In these situations, the Geth node user may not have previously configured txlookuplimit
(i.e. the default of around one year), but later realizes they need to index all
historical blocks. However, adding txlookuplimit=0 and restarting geth has no effect. This
change makes it check for required indexing work once, on startup, to fix the issue.
Co-authored-by: Martin Holst Swende <martin@swende.se>
This changes the forkID calculation to ignore time-based forks that occurred before the
genesis block. It's supposed to be done this way because the spec says:
> If a chain is configured to start with a non-Frontier ruleset already in its genesis, that is NOT considered a fork.
This PR removes the newly added txpool.Transaction wrapper type, and instead adds a way
of keeping the blob sidecar within types.Transaction. It's better this way because most
code in go-ethereum does not care about blob transactions, and probably never will. This
will start mattering especially on the client side of RPC, where all APIs are based on
types.Transaction. Users need to be able to use the same signing flows they already
have.
However, since blobs are only allowed in some places but not others, we will now need to
add checks to avoid creating invalid blocks. I'm still trying to figure out the best place
to do some of these. The way I have it currently is as follows:
- In block validation (import), txs are verified not to have a blob sidecar.
- In miner, we strip off the sidecar when committing the transaction into the block.
- In TxPool validation, txs must have a sidecar to be added into the blobpool.
- Note there is a special case here: when transactions are re-added because of a chain
reorg, we cannot use the transactions gathered from the old chain blocks as-is,
because they will be missing their blobs. This was previously handled by storing the
blobs into the 'blobpool limbo'. The code has now changed to store the full
transaction in the limbo instead, but it might be confusing for code readers why we're
not simply adding the types.Transaction we already have.
Code changes summary:
- txpool.Transaction removed and all uses replaced by types.Transaction again
- blobpool now stores types.Transaction instead of defining its own blobTx format for storage
- the blobpool limbo now stores types.Transaction instead of storing only the blobs
- checks to validate the presence/absence of the blob sidecar added in certain critical places
The Go authors updated golang/x/ext to change the function signature of the slices sort method.
It's an entire shitshow now because x/ext is not tagged, so everyone's codebase just
picked a new version that some other dep depends on, causing our code to fail building.
This PR updates the dep on our code too and does all the refactorings to follow upstream...
This change removes a chainconfig parameter passed into rawdb.ReadLogs, which is not used nor needed.
It also modifies the filter loop slightly, avoiding a labeled break and instead using a method.
This change does not modify any behaviour.
Context: The UpdateContractCode method was introduced for the state storage commitment
schemes that include the whole code for their commitment computation. It must therefore be called
before the root hash is computed at the end of IntermediateRoot.
This should have no impact on the MPT since, in this context, the method is a no-op.
This adds support for the "yParity" field in transaction objects returned by RPC
APIs. We somehow forgot to add this field even though it has been in the spec for
a long time.
This change rearranges the accessor methods in block.go and fixes some minor issues with
the copy-on-write logic of block data. Fixed issues:
- Block.WithWithdrawals did not create a shallow copy of the block.
- Block.WithBody copied the header unnecessarily, and did not preserve withdrawals.
However, the bugs did not affect any code in go-ethereum because blocks are *always*
created using NewBlockWithHeader().WithBody().WithWithdrawals()
* all: implement path-based state scheme
* all: edits from review
* core/rawdb, trie/triedb/pathdb: review changes
* core, light, trie, eth, tests: reimplement pbss history
* core, trie/triedb/pathdb: track block number in state history
* trie/triedb/pathdb: add history documentation
* core, trie/triedb/pathdb: address comments from Peter's review
Important changes to list:
- Cache trie nodes by path in clean cache
- Remove root->id mappings when history is truncated
* trie/triedb/pathdb: fallback to disk if unexpect node in clean cache
* core/rawdb: fix tests
* trie/triedb/pathdb: rename metrics, change clean cache key
* trie/triedb: manage the clean cache inside of disk layer
* trie/triedb/pathdb: move journal function
* trie/triedb/path: fix tests
* trie/triedb/pathdb: fix journal
* trie/triedb/pathdb: fix history
* trie/triedb/pathdb: try to fix tests on windows
* core, trie: address comments
* trie/triedb/pathdb: fix test issues
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core: check excessBlobGas in front
Signed-off-by: jsvisa <delweng@gmail.com>
* core: no need to manual panic
Signed-off-by: jsvisa <delweng@gmail.com>
* core: no comment
Signed-off-by: jsvisa <delweng@gmail.com>
---------
Signed-off-by: jsvisa <delweng@gmail.com>
* core/types: add data gas fields in Receipt
* core/types: use BlobGas method of tx
* core: fix test
* core/types: fix receipt tests, add data gas used field test
---------
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* core/blobpool: implement txpool for blob txs
* core/txpool: track address reservations to notice any weird bugs
* core/txpool/blobpool: add support for in-memory operation for tests
* core/txpool/blobpool: fix heap updating after SetGasTip if account is evicted
* core/txpool/blobpool: fix eviction order if cheap leading txs are included
* core/txpool/blobpool: add note as to why the eviction fields are not inited in reinject
* go.mod: pull in inmem billy form upstream
* core/txpool/blobpool: fix review commens
* core/txpool/blobpool: make heap and heap test deterministic
* core/txpool/blobpool: luv u linter
* core/txpool: limit blob transactions to 16 per account
* core/txpool/blobpool: fix rebase errors
* core/txpool/blobpool: luv you linter
* go.mod: revert some strange crypto package dep updates
EIP-6780: SELFDESTRUCT only in same transaction
> SELFDESTRUCT will recover all funds to the caller but not delete the account, except when called in the same transaction as creation
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
This updates the reference tests to the latest version and also adds logic
to process EIP-4844 blob transactions into the state transition. We are now
passing most Cancun fork tests.
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Felix Lange <fjl@twurst.com>
This change adds the ability to perform reads from freezer without size limitation. This can be useful in cases where callers are certain that out-of-memory will not happen (e.g. reading only a few elements).
The previous API was designed to behave both optimally and secure while servicing a request from a peer, whereas this change should _not_ be used when an untrusted peer can influence the query size.
This change makes the StateDB track the state key value diff of a block transition.
We already tracked current account and storage values for the purpose of updating
the state snapshot. With this PR, we now also track the original (pre-transition) values
of accounts and storage slots.
Implements [EIP 5656](https://eips.ethereum.org/EIPS/eip-5656), MCOPY instruction, and enables it for Cancun.
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
Back before #27178 , we spun up a number of ethash verifiers to verify headers. So we also had tests to ensure that we were indeed able to abort verification even if we had multiple workers running.
With PR #27178, we removed the parallelism in verification, and these tests are now failing, since we now just sequentially fire away the results as fast as possible on one routine.
This change removes the (sometimes failing) tests
This change adds back the 'geth --dev' mode of operation, using a cl-mocker.
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: lightclient <14004106+lightclient@users.noreply.github.com>
The clean trie cache is persisted periodically, therefore Geth can
quickly warmup the cache in next restart.
However it will reduce the robustness of system. The assumption is
held in Geth that if the parent trie node is present, then the entire
sub-trie associated with the parent are all prensent.
Imagine the scenario that Geth rewinds itself to a past block and
restart, but Geth finds the root node of "future state" in clean
cache then regard this state is present in disk, while is not in fact.
Another example is offline pruning tool. Whenever an offline pruning
is performed, the clean cache file has to be removed to aviod hitting
the root node of "deleted states" in clean cache.
All in all, compare with the minor performance gain, system robustness
is something we care more.
* core/state, light, les: make signature of ContractCode hash-independent
* push current state for feedback
* les: fix unit test
* core, les, light: fix les unittests
* core/state, trie, les, light: fix state iterator
* core, les: address comments
* les: fix lint
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Verkle trees store the code inside the trie. This PR changes the interface to pass the code, as well as the dirty flag to tell the trie package if the code is dirty and needs to be updated. This is a no-op for the MPT and the odr trie.
The state availability is checked during the creation of a state reader.
- In hash-based database, if the specified root node does not exist on disk disk, then
the state reader won't be created and an error will be returned.
- In path-based database, if the specified state layer is not available, then the
state reader won't be created and an error will be returned.
This change also contains a stricter semantics regarding the `Commit` operation: once it has been performed, the trie is no longer usable, and certain operations will return an error.
Sina Mahmoodi
0xbstn
phenix3443
rjl493456442
bnovil
hzysvilla
Marius van der Wijden
tokikuch
Péter Szilágyi
Delweng
Felix Lange
Darioush Jalali
Martin Holst Swende
lightclient
Jorge
aaronbuchwald
Guido Vranken
DongXi Huang
imulmat4
Guillaume Ballet
Mario Vega
jwasinger
ucwong
Charles Cooper
hero5512