This change addresses an issue in snap sync, specifically when the entire sync process can be halted due to an encountered empty storage range.
Currently, on the snap sync client side, the response to an empty (partial) storage range is discarded as a non-delivery. However, this response can be a valid response, when the particular range requested does not contain any slots.
For instance, consider a large contract where the entire key space is divided into 16 chunks, and there are no available slots in the last chunk [0xf] -> [end]. When the node receives a request for this particular range, the response includes:
The proof with origin [0xf]
A nil storage slot set
If we simply discard this response, the finalization of the last range will be skipped, halting the entire sync process indefinitely. The test case TestSyncWithUnevenStorage can reproduce the scenario described above.
In addition, this change also defines the common variables MaxAddress and MaxHash.
This PR adds server-side limits for JSON-RPC batch requests. Before this change, batches
were limited only by processing time. The server would pick calls from the batch and
answer them until the response timeout occurred, then stop processing the remaining batch
items.
Here, we are adding two additional limits which can be configured:
- the 'item limit': batches can have at most N items
- the 'response size limit': batches can contain at most X response bytes
These limits are optional in package rpc. In Geth, we set a default limit of 1000 items
and 25MB response size.
When a batch goes over the limit, an error response is returned to the client. However,
doing this correctly isn't always possible. In JSON-RPC, only method calls with a valid
`id` can be responded to. Since batches may also contain non-call messages or
notifications, the best effort thing we can do to report an error with the batch itself is
reporting the limit violation as an error for the first method call in the batch. If a batch is
too large, but contains only notifications and responses, the error will be reported with
a null `id`.
The RPC client was also changed so it can deal with errors resulting from too large
batches. An older client connected to the server code in this PR could get stuck
until the request timeout occurred when the batch is too large. **Upgrading to a version
of the RPC client containing this change is strongly recommended to avoid timeout issues.**
For some weird reason, when writing the original client implementation, @fjl worked off of
the assumption that responses could be distributed across batches arbitrarily. So for a
batch request containing requests `[A B C]`, the server could respond with `[A B C]` but
also with `[A B] [C]` or even `[A] [B] [C]` and it wouldn't make a difference to the
client.
So in the implementation of BatchCallContext, the client waited for all requests in the
batch individually. If the server didn't respond to some of the requests in the batch, the
client would eventually just time out (if a context was used).
With the addition of batch limits into the server, we anticipate that people will hit this
kind of error way more often. To handle this properly, the client now waits for a single
response batch and expects it to contain all responses to the requests.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
This commit adds support for two new commands to clef, making it possible to list accounts / wallets from the command-line-interface.
Co-authored-by: Martin Holst Swende <martin@swende.se>
This changes the CI build to store the git commit and date into package
internal/version instead of package main. Doing this essentially merges our
two ways of tracking the go-ethereum version into a single place, achieving
two objectives:
- Bad block reports, which use version.Info(), will now have the git commit
information even when geth is built in an environment such as
launchpad.net where git access is unavailable.
- For geth builds created by `go build ./cmd/geth` (i.e. not using `go run
build/ci.go install`), git information stored by the go tool is now used
in the p2p node name as well as in `geth version` and `geth
version-check`.
This change updates our urfave/cli dependency to the v2 branch of the library.
There are some Go API changes in cli v2:
- Flag values can now be accessed using the methods ctx.Bool,
ctx.Int, ctx.String, ... regardless of whether the flag is 'local' or
'global'.
- v2 has built-in support for flag categories. Our home-grown category
system is removed and the categories of flags are assigned as part of
the flag definition.
For users, there is only one observable difference with cli v2: flags must now
strictly appear before regular arguments. For example, the following command is
now invalid:
geth account import mykey.json --password file.txt
Instead, the command must be invoked as follows:
geth account import --password file.txt mykey.json
This PR fixes up the example python clef wrapper. The poc is intended to demonstrate how to wite a UI for clef, and had severely bitrotted.
With these changes, it "works" in the sense that all the built-in tests triggers the intended python callbacks (no errors about method not found). It does not "work" in the sense that the wrapper can be used as an actual UI. It will auto-reject any signing requests, for example.
* rpc, node: refactor request validation and add jwt validation
* node, rpc: fix error message, ignore engine api in RegisterAPIs
* node: make authenticated port configurable
* eth/catalyst: enable unauthenticated version of engine api
* node: rework obtainjwtsecret (backport later)
* cmd/geth: added auth port flag
* node: happy lint, happy life
* node: refactor authenticated api
Modifies the authentication mechanism to use default values
* node: trim spaces and newline away from secret
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This adds support for EIP-2718 typed transactions as well as EIP-2930
access list transactions (tx type 1). These EIPs are scheduled for the
Berlin fork.
There very few changes to existing APIs in core/types, and several new APIs
to deal with access list transactions. In particular, there are two new
constructor functions for transactions: types.NewTx and types.SignNewTx.
Since the canonical encoding of typed transactions is not RLP-compatible,
Transaction now has new methods for encoding and decoding: MarshalBinary
and UnmarshalBinary.
The existing EIP-155 signer does not support the new transaction types.
All code dealing with transaction signatures should be updated to use the
newer EIP-2930 signer. To make this easier for future updates, we have
added new constructor functions for types.Signer: types.LatestSigner and
types.LatestSignerForChainID.
This change also adds support for the YoloV3 testnet.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Ryan Schneider <ryanleeschneider@gmail.com>
* accounts, signer: implement gnosis safe support
* common/math: add type for marshalling big to dec
* accounts, signer: properly sign gnosis requests
* signer, clef: implement account_signGnosisTx
* signer: fix auditlog print, change rpc-name (signGnosisTx to signGnosisSafeTx)
* signer: pass validation-messages/warnings to the UI for gnonsis-safe txs
* signer/core: minor change to validationmessages of typed data
* cmd/clef, signer/core: use better terminal input for passwords, make it possible to avoid boot-up warning
* all: move commonly used prompter to isolated (small) package
* cmd/clef: Add new --acceptWarn to clef README
* cmd/clef: rename flag 'acceptWarn' to 'suppress-bootwarn'
Co-authored-by: ligi <ligi@ligi.de>
* rpc flags related to starting http server renamed to http
* old rpc flags aliased and still functional
* pprof flags fixed
* renames gpo related flags
* linted
* renamed rpc flags for consistency and clarity
* added warn logs
* added more warn logs for all deprecated flags for consistency
* moves legacy flags to separate file, hides older flags under show-deprecated-flags command
* legacy prefix and moved some more legacy flags to legacy file
* fixed circular import
* added docs
* fixed imports lint error
* added notes about when flags were deprecated
* cmd/utils: group flags by deprecation date + reorder by date,
* modified deprecated comments for consistency, added warn log for --rpc
* making sure deprecated flags are still functional
* show-deprecated-flags command cleaned up
* fixed lint errors
* corrected merge conflict
* IsSet --> GlobalIsSet
* uncategorized flags, if not deprecated, displayed under misc
Co-authored-by: Martin Holst Swende <martin@swende.se>
Rather than just closing the underlying network listener to stop our
HTTP servers, use the graceful shutdown procedure, waiting for any
in-process requests to finish.
This change makes it possible to run geth with JSON-RPC over HTTP and
WebSocket on the same TCP port. The default port for WebSocket
is still 8546.
geth --rpc --rpcport 8545 --ws --wsport 8545
This also removes a lot of deprecated API surface from package rpc.
The rpc package is now purely about serving JSON-RPC and no longer
provides a way to start an HTTP server.
* build: use golangci-lint
This changes build/ci.go to download and run golangci-lint instead
of gometalinter.
* core/state: fix unnecessary conversion
* p2p/simulations: fix lock copying (found by go vet)
* signer/core: fix unnecessary conversions
* crypto/ecies: remove unused function cmpPublic
* core/rawdb: remove unused function print
* core/state: remove unused function xTestFuzzCutter
* core/vm: disable TestWriteExpectedValues in a different way
* core/forkid: remove unused function checksum
* les: remove unused type proofsData
* cmd/utils: remove unused functions prefixedNames, prefixFor
* crypto/bn256: run goimports
* p2p/nat: fix goimports lint issue
* cmd/clef: avoid using unkeyed struct fields
* les: cancel context in testRequest
* rlp: delete unreachable code
* core: gofmt
* internal/build: simplify DownloadFile for Go 1.11 compatibility
* build: remove go test --short flag
* .travis.yml: disable build cache
* whisper/whisperv6: fix ineffectual assignment in TestWhisperIdentityManagement
* .golangci.yml: enable goconst and ineffassign linters
* build: print message when there are no lint issues
* internal/build: refactor download a bit
rjl493456442
Curith
mmsqe
Péter Szilágyi
Delweng
Joseph Cook
Martin Holst Swende
Felix Lange
willian.eth
lightclient@protonmail.com
lightclient
Håvard Anda Estensen
baptiste-b-pegasys
ligi
rene
Alex Prut
Binacs
6543
chris-j-h
Martin Michlmayr
Satpal
Steven E. Harris
Chris Chinchilla
zaccoding