ToMessage is used to convert between ethapi.CallArgs and types.Message.
It reduces the length of the DoCall method by about half by abstracting out
the conversion between the CallArgs and the Message. This should improve the
code's maintainability and reusability.
Prior to this change, eth_call changed the balance of the sender account in the
EVM environment to 2^256 wei to cover the gas cost of the call execution.
We've had this behavior for a long time even though it's super confusing.
This commit sets the default call gasprice to zero instead of updating the balance,
which is better because it makes eth_call semantics less surprising. Removing
the built-in balance assignment also makes balance overrides work as expected.
This makes eth_call and eth_estimateGas use the zero address
as sender when the "from" parameter is not supplied.
Co-authored-by: Felix Lange <fjl@twurst.com>
This replaces the JavaScript interpreter used by the console with goja,
which is actively maintained and a lot faster than otto. Clef still uses otto
and eth/tracers still uses duktape, so we are currently dependent on three
different JS interpreters. We're looking to replace the remaining uses of otto
soon though.
* log: delete RotatingFileHandler
We added this for the dashboard, which is gone now. The
handler never really worked well and had data race and file
handling issues.
* internal/debug: remove unused RotatingFileHandler setup code
* build: remove env.sh
This removes the dirty symlink-to-self hack we've had for years. The
script was added to enable building without GOPATH and did that job
reliably for all this time. We can remove the workaround because modern
Go supports building without GOPATH natively.
* Makefile: add GO111MODULE=on to environment
* internal/testlog: print file+line number of log call in test log
This changes the unit test logger to print the actual file and line
number of the logging call instead of "testlog.go:44".
Output of 'go test -v -run TestServerListen ./p2p' before this change:
=== RUN TestServerListen
--- PASS: TestServerListen (0.00s)
testlog.go:44: DEBUG[01-08|15:16:31.651] UDP listener up addr=127.0.0.1:62678
testlog.go:44: DEBUG[01-08|15:16:31.651] TCP listener up addr=127.0.0.1:62678
testlog.go:44: TRACE[01-08|15:16:31.652] Accepted connection addr=127.0.0.1:62679
And after:
=== RUN TestServerListen
--- PASS: TestServerListen (0.00s)
server.go:868: DEBUG[01-08|15:25:35.679] TCP listener up addr=127.0.0.1:62712
server.go:557: DEBUG[01-08|15:25:35.679] UDP listener up addr=127.0.0.1:62712
server.go:912: TRACE[01-08|15:25:35.680] Accepted connection addr=127.0.0.1:62713
* internal/testlog: document use of t.Helper
* build: use golangci-lint
This changes build/ci.go to download and run golangci-lint instead
of gometalinter.
* core/state: fix unnecessary conversion
* p2p/simulations: fix lock copying (found by go vet)
* signer/core: fix unnecessary conversions
* crypto/ecies: remove unused function cmpPublic
* core/rawdb: remove unused function print
* core/state: remove unused function xTestFuzzCutter
* core/vm: disable TestWriteExpectedValues in a different way
* core/forkid: remove unused function checksum
* les: remove unused type proofsData
* cmd/utils: remove unused functions prefixedNames, prefixFor
* crypto/bn256: run goimports
* p2p/nat: fix goimports lint issue
* cmd/clef: avoid using unkeyed struct fields
* les: cancel context in testRequest
* rlp: delete unreachable code
* core: gofmt
* internal/build: simplify DownloadFile for Go 1.11 compatibility
* build: remove go test --short flag
* .travis.yml: disable build cache
* whisper/whisperv6: fix ineffectual assignment in TestWhisperIdentityManagement
* .golangci.yml: enable goconst and ineffassign linters
* build: print message when there are no lint issues
* internal/build: refactor download a bit
* build: bump PPAs to Go 1.13 (via longsleep), keep Trusty on 1.11
* travis, build, vendor: use own Go bundle for PPA builds
* travis, build, internal, vendor: smarter Go bundler, own untar
* build: updated ci-notes with new Go bundling, only make, don't test
Most of these changes are related to the Go 1.13 changes to test binary
flag handling.
* cmd/geth: make attach tests more reliable
This makes the test wait for the endpoint to come up by polling
it instead of waiting for two seconds.
* tests: fix test binary flags for Go 1.13
Calling flag.Parse during package initialization is prohibited
as of Go 1.13 and causes test failures. Call it in TestMain instead.
* crypto/ecies: remove useless -dump flag in tests
* p2p/simulations: fix test binary flags for Go 1.13
Calling flag.Parse during package initialization is prohibited
as of Go 1.13 and causes test failures. Call it in TestMain instead.
* build: remove workaround for ./... vendor matching
This workaround was necessary for Go 1.8. The Go 1.9 release changed
the expansion rules to exclude vendored packages.
* Makefile: use relative path for GOBIN
This makes the "Run ./build/bin/..." line look nicer.
* les: fix test binary flags for Go 1.13
Calling flag.Parse during package initialization is prohibited
as of Go 1.13 and causes test failures. Call it in TestMain instead.
* graphql, internal/ethapi: extend eth_call
This PR offers the third option parameter for eth_call API.
Caller can specify a batch of contracts for overriding the
original account metadata(nonce, balance, code, state).
It has a few advantages:
* It's friendly for debugging
* It's can make on-chain contract lighter for getting rid of
state access functions
* core, internal: address comments
* accounts/mananger, internal/ethapi/api: Add new function AllAccounts on account manager to remove the duplication code on getting all wallets accounts
* Rename to Accounts
* Rename to AllAccounts
This change ensures 'blockHash', 'blockNumber' and 'transactionIndex'
are set to null for pending transactions. This behavior is required by
the Ethereum JSON-RPC spec.
* add-date-to unstable
* fields-insteadof-split
* internal/build: support building with missing git
* docker: add git history back to support commit date in version
* internal/build: use PR commits hashes for PR builds
* accounts: add note about backing up the keystore
* cmd, accounts: move the printout to accountCreate
* internal, signer: add info when new account is created via rpc
* cmd, internal, signer: split logs
* cmd/geth: make account new output a bit more verbose
* accounts, core, internal, node: Add support for smartcard wallets
* accounts, internal: Changes in response to review
* vendor: pull in missing go-echd library
* accounts/scwallet, console: user friendly card opening
* accounts/scwallet: ordered wallets, tighter events, derivation logs
* accounts, console: frendly card errors, support pin unblock
* accounts/scwallet: fix crypto API change
* accounts/scwallet: rebase and update
* Fix some linter issues
* Remove the direct dependency on libpcsclite
Instead, use a go library that communicates with pcscd over a socket.
Also update the changes introduced by @gravityblast since this PR's
inception
* Temporary fix to the ADBU status call
* fix wallet status update
This is a temporary fix, better checks need to
be performed once the whole process has been
validated.
* Fix key derivation
* Add some documentation
* Update a comment to reflect the workings of the updated system
* Vendor keycard-go/derivationpath
* Formatting fixes
* Add instructions on how to install the card
* Achieve full transaction signature+sending
* PK derivation has to be supported by the card
* Fix linter issues
* Upgrade to keycard app v2.1.1
* Set gballet as codeowner of the smartcard wallet dir
* fix unnecessary condition linter warning
* refuse to overwrite the master key of a previously initialized card
* refresh the account list when initializing the card
* Update the card preparation instructions based on review feedback
* 'sanitize' JSON input
Co-Authored-By: gballet <gballet@gmail.com>
* Apply suggestions from code review
Co-Authored-By: gballet <gballet@gmail.com>
* fix a serialization error
* more review feedback
* More review feedback
* Can now specify the number of empty accounts to derive
* Fix rebase error: include norm package
* Update bip-39 ref and remove ebfe/scard from vendor
* Add missing dependency
* signer/clef: make use of json-rpc notification
* signer: tidy up output of OnApprovedTx
* accounts/external, signer: implement remote signing of text, make accounts_sign take hexdata
* clef: added basic testscript
* signer, external, api: add clique signing test to debug rpc, fix clique signing in clef
* signer: fix clique interoperability between geth and clef
* clef: rename networkid switch to chainid
* clef: enable chainid flag
* clef, signer: minor changes from review
* clef: more tests for signer
* Initial work on a graphql API
* Added receipts, and more transaction fields.
* Finish receipts, add logs
* Add transactionCount to block
* Add types and .
* Update Block type to be compatible with ethql
* Rename nonce to transactionCount in Account, to be compatible with ethql
* Update transaction, receipt and log to match ethql
* Add query operator, for a range of blocks
* Added ommerCount to Block
* Add transactionAt and ommerAt to Block
* Added sendRawTransaction mutation
* Add Call and EstimateGas to graphQL API
* Refactored to use hexutil.Bytes instead of HexBytes
* Replace BigNum with hexutil.Big
* Refactor call and estimateGas to use ethapi struct type
* Replace ethgraphql.Address with common.Address
* Replace ethgraphql.Hash with common.Hash
* Converted most quantities to Long instead of Int
* Add support for logs
* Fix bug in runFilter
* Restructured Transaction to work primarily with headers, so uncle data is reported properly
* Add gasPrice API
* Add protocolVersion API
* Add syncing API
* Moved schema into its own source file
* Move some single use args types into anonymous structs
* Add doc-comments
* Fixed backend fetching to use context
* Added (very) basic tests
* Add documentation to the graphql schema
* Fix reversion for formatting of big numbers
* Correct spelling error
* s/BigInt/Long/
* Update common/types.go
* Fixes in response to review
* Fix lint error
* Updated calls on private functions
* Fix typo in graphql.go
* Rollback ethapi breaking changes for graphql support
Co-Authored-By: Arachnid <arachnid@notdot.net>
Until this commit, when sending an RPC request that called `NewEVM`, a blank `vm.Config`
would be taken so as to set some options, based on the default configuration. If some extra
configuration switches were passed to the blockchain, those would be ignored.
This PR adds a function to get the config from the blockchain, and this is what is now used
for RPC calls.
Some subsequent changes need to be made, see https://github.com/ethereum/go-ethereum/pull/17955#pullrequestreview-182237244
for the details of the discussion.
* first impl of eth_getProof
* fixed docu
* added comments and refactored based on comments from holiman
* created structs
* handle errors correctly
* change Value to *hexutil.Big in order to have the same output as parity
* use ProofList as return type
* consensus/ethash: start remote ggoroutine to handle remote mining
* consensus/ethash: expose remote miner api
* consensus/ethash: expose submitHashrate api
* miner, ethash: push empty block to sealer without waiting execution
* consensus, internal: add getHashrate API for ethash
* consensus: add three method for consensus interface
* miner: expose consensus engine running status to miner
* eth, miner: specify etherbase when miner created
* miner: commit new work when consensus engine is started
* consensus, miner: fix some logics
* all: delete useless interfaces
* consensus: polish a bit
* build: add support for different package and binary names
* build: bump up copyright date
* build: change default PackageName to empty string
* build, internal, swarm: enhance build/release process
* build: hack ethereum-swarm as a "depends" in deb package
* build/ci: remove redundant variables
* build, cmd, mobile, params, swarm: remove VERSION file; rename Version to VersionMeta;
* internal: remove VERSION() method which reads VERSION file
* build: fix VersionFilePath to Version
* Makefile: remove clean_go_build_cache.sh until it works
* Makefile: revert removal of clean_go_build_cache.sh
These RPC calls are analogous to Parity's parity_addReservedPeer and
parity_removeReservedPeer.
They are useful for adjusting the trusted peer set during runtime,
without requiring restarting the server.
* debug: Use pprof goroutine writer in debug.Stacks() to ensure all goroutines are captured.
* Up to 64MB limit, previous code only captured first 1MB of goroutines.
* internal/debug: simplify stacks handler
* fix typo
* fix pointer receiver
ToECDSAPub was unsafe because it returned a non-nil key with nil X, Y in
case of invalid input. This change replaces ToECDSAPub with
UnmarshalPubkey across the codebase.
William Morriss
Martin Holst Swende
Péter Szilágyi
Felix Lange
Guillaume Ballet
Prince Sinha
Ryan Schneider
xinluyin
Felföldi Zsolt
gary rong
Roc Yu
Aleksey @soar Smyrnov
Alexander van der Meij
Kitten King
C. Brown
Kurkó Mihály
Nick Johnson
Samuel Marks
Felix Lange
Matthew Halpern
Kris Shinn
Yondon Fu
Jerzy Lasyk
Paweł Bylica
Javier Peletier
Kenso Trabing
Simon Jentzsch
HackyMiner
Liang ZOU
Anton Evangelatov
Andrey Petrov
kiel barry
ligi