This PR introduces a `ContractCodeReader` interface with functions defined:
type ContractCodeReader interface {
Code(addr common.Address, codeHash common.Hash) ([]byte, error)
CodeSize(addr common.Address, codeHash common.Hash) (int, error)
}
This interface can be implemented in various ways. Although the codebase
currently includes only one implementation, additional implementations
could be created for different purposes and scenarios, such as a code
reader designed for the Verkle tree approach or one that reads code from
the witness.
*Notably, this interface modifies the function’s semantics. If the
contract code is not found, no error will be returned. An error should
only be returned in the event of an unexpected issue, primarily for
future implementations.*
The original state.Reader interface is extended with ContractCodeReader
methods, it gives us more flexibility to manipulate the reader with additional
logic on top, e.g. Hooks.
type Reader interface {
ContractCodeReader
StateReader
}
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This workaround is meant to minimize the possibility for snapshot generation
once the geth node upgrades to new version (specifically #30752 )
In #30752, the journal format in state snapshot is modified by removing
the destruct set. Therefore, the existing old format (version = 0) will be
discarded and all in-memory layers will be lost. Unfortunately, the lost
in-memory layers can't be recovered by some other approaches, and the
entire state snapshot will be regenerated (it will last about 2.5 hours).
This pull request introduces a workaround to adopt the legacy journal if
the destruct set contained is empty. Since self-destruction has been
deprecated following the cancun fork, the destruct set is expected to be nil for
layers above the fork block. However, an exception occurs during contract
deployment: pre-funded accounts may self-destruct, causing accounts with
non-zero balances to be removed from the state. For example,
https://etherscan.io/tx/0xa087333d83f0cd63b96bdafb686462e1622ce25f40bd499e03efb1051f31fe49).
For nodes with a fully synced state, the legacy journal is likely compatible with
the updated definition, eliminating the need for regeneration. Unfortunately,
nodes performing a full sync of historical chain segments or encountering
pre-funded account deletions may face incompatibilities, leading to automatic
snapshot regeneration.
This reverts commit 23800122b3.
The original pull request introduces a bug and some flaky tests are
detected because of this flaw.
```
--- FAIL: TestRecoverSnapshotFromWipingCrash (0.27s)
blockchain_snapshot_test.go:158: The disk layer is not integrated snapshot is not constructed
{"pc":0,"op":88,"gas":"0x7148","gasCost":"0x2","memSize":0,"stack":[],"depth":1,"refund":0,"opName":"PC"}
{"pc":1,"op":255,"gas":"0x7146","gasCost":"0x1db0","memSize":0,"stack":["0x0"],"depth":1,"refund":0,"opName":"SELFDESTRUCT"}
{"output":"","gasUsed":"0x0"}
{"output":"","gasUsed":"0x1db2"}
{"pc":0,"op":116,"gas":"0x13498","gasCost":"0x3","memSize":0,"stack":[],"depth":1,"refund":0,"opName":"PUSH21"}
```
Before the original PR, the snapshot would block the function until the
disk layer
was fully generated under the following conditions:
(a) explicitly required by users with `AsyncBuild = false`.
(b) the snapshot was being fully rebuilt or *the disk layer generation
had resumed*.
Unfortunately, with the changes introduced in that PR, the snapshot no
longer waits
for disk layer generation to complete if the generation is resumed. It
brings lots of
uncertainty and breaks this tiny debug feature.
This PR is purely for improved readability; I was doing work involving
the file and think this may help others who are trying to understand
what's going on.
1. `snapshot.Tree.Rebuild()` now returns a function that blocks until
regeneration is complete, allowing `Tree.waitBuild()` to be removed
entirely as all it did was search for the `done` channel behind this new
function.
2. Its usage inside `New()` is also simplified by (a) only waiting if
`!AsyncBuild`; and (b) avoiding the double negative of `if !NoBuild`.
---------
Co-authored-by: Martin HS <martin@swende.se>
This pull request removes the destruct flag from the state snapshot to
simplify the code.
Previously, this flag indicated that an account was removed during a
state transition, making all associated storage slots inaccessible.
Because storage deletion can involve a large number of slots, the actual
deletion is deferred until the end of the process, where it is handled
in batches.
With the deprecation of self-destruct in the Cancun fork, storage
deletions are no longer expected. Historically, the largest storage
deletion event in Ethereum was around 15 megabytes—manageable in memory.
In this pull request, the single destruct flag is replaced by a set of
deletion markers for individual storage slots. Each deleted storage slot
will now appear in the Storage set with a nil value.
This change will simplify a lot logics, such as storage accessing,
storage flushing, storage iteration and so on.
This change invokes the OnCodeChange hook when selfdestruct operation is performed, and a contract is removed. This is an event which can be consumed by tracers.
Tests that are crucial to for verifying the verkle testnet functions properly.
---------
Signed-off-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
Co-authored-by: Ignacio Hagopian <jsign.uy@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Martin HS <martin@swende.se>
I think the core code should generally be agnostic about the witness and
the statedb layer should determine what elements need to be included in
the witness. Because code is accessed via `GetCode`, and
`GetCodeLength`, the statedb will always know when it needs to add that
code into the witness.
The edge case is block hashes, so we continue to add them manually in
the implementation of `BLOCKHASH`.
It probably makes sense to refactor statedb so we have a wrapped
implementation that accumulates the witness, but this is a simpler
change that makes #30078 less aggressive.
This PR moves the logging/tracing-facilities out of `*state.StateDB`,
in to a wrapping struct which implements `vm.StateDB` instead.
In most places, it is a pretty straight-forward change:
- First, hoisting the invocations from state objects up to the statedb.
- Then making the mutation-methods simply return the previous value, so
that the external logging layer could log everything.
Some internal code uses the direct object-accessors to mutate the state,
particularly in testing and in setting up state overrides, which means
that these changes are unobservable for the hooked layer. Thus, configuring
the overrides are not necessarily part of the API we want to publish.
The trickiest part about the layering is that when the selfdestructs are
finally deleted during `Finalise`, there's the possibility that someone
sent some ether to it, which is burnt at that point, and thus needs to
be logged. The hooked layer reaches into the inner layer to figure out
these events.
In package `vm`, the conversion from `state.StateDB + hooks` into a
hooked `vm.StateDB` is performed where needed.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Changelog: https://golangci-lint.run/product/changelog/#1610
Removes `exportloopref` (no longer needed), replaces it with
`copyloopvar` which is basically the opposite.
Also adds:
- `durationcheck`
- `gocheckcompilerdirectives`
- `reassign`
- `mirror`
- `tenv`
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This pull request skips the state snapshot update if the base layer is
not existent, eliminating the numerous warning logs after an unclean
shutdown.
Specifically, Geth will rewind its chain head to a historical block
after unclean shutdown and state snapshot will be remained as unchanged
waiting for recovery. During this period of time, the snapshot is unusable
and all state updates should be ignored/skipped for state snapshot update.
#29995 has been reverted due to an unexpected flaw in the state snapshot
process.
Specifically, it attempts to stop the state snapshot generation, which
could potentially
cause the system to halt if the generation is not currently running.
This pull request ports the changes made in #29995 and fixes the flaw.
This pull request replaces the field pointer in journal entry with the
field itself, specifically the address of mutated account.
While it will introduce the extra allocation cost, but it's easier for
code reading. Let's measure the overhead overall to see if the change is
acceptable or not.
This pull request introduces a state.Reader interface for state
accessing.
The interface could be implemented in various ways. It can be pure trie
only reader, or the combination of trie and state snapshot. What's more,
this interface allows us to have more flexibility in the future, e.g.
the
archive reader (for accessing archive state).
Additionally, this pull request removes the following metrics
- `chain/snapshot/account/reads`
- `chain/snapshot/storage/reads`
This pull request fixes a flaw in prefetcher.
In verkle tree world, both accounts and storage slots are committed into
a single tree instance for state hashing. If the prefetcher is activated, we will
try to pull the trie for the prefetcher for performance speedup.
However, we had a special logic to skip pulling storage trie if the
storage root is empty. While it's true for merkle as we have nothing to
do with an empty storage trie, it's totally wrong for verkle. The consequences
for skipping pulling is the storage changes are committed into trie A, while the
account changes are committed into trie B (pulled from the prefetcher), boom.
This PR implements changes related to
[EIP-6800](https://eips.ethereum.org/EIPS/eip-6800) and
[EIP-4762](https://eips.ethereum.org/EIPS/eip-4762) spec updates.
A TL;DR of the changes is that `Version`, `Balance`, `Nonce` and
`CodeSize` are encoded in a single leaf named `BasicData`. For more
details, see the [_Header Values_ table in
EIP-6800](https://eips.ethereum.org/EIPS/eip-6800#header-values).
The motivation for this was simplifying access event patterns, reducing
code complexity, and, as a side effect, saving gas since fewer leaf
nodes must be accessed.
---------
Co-authored-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR adds the bulk verkle witness+proof production at the end of block
production. It reads all data from the tree in one swoop and produces
a verkle proof.
Co-authored-by: Felix Lange <fjl@twurst.com>
This is a follow-up to #29520, and a preparatory PR to a more thorough
change in the journalling system.
### API methods instead of `append` operations
This PR hides the journal-implementation details away, so that the
statedb invokes methods like `JournalCreate`, instead of explicitly
appending journal-events in a list. This means that it's up to the
journal whether to implement it as a sequence of events or
aggregate/merge events.
### Snapshot-management inside the journal
This PR also makes it so that management of valid snapshots is moved
inside the journal, exposed via the methods `Snapshot() int` and
`RevertToSnapshot(revid int, s *StateDB)`.
### SetCode
JournalSetCode journals the setting of code: it is implicit that the
previous values were "no code" and emptyCodeHash. Therefore, we can
simplify the setCode journal.
### Selfdestruct
The self-destruct journalling is a bit strange: we allow the
selfdestruct operation to be journalled several times. This makes it so
that we also are forced to store whether the account was already
destructed.
What we can do instead, is to only journal the first destruction, and
after that only journal balance-changes, but not journal the
selfdestruct itself.
This simplifies the journalling, so that internals about state
management does not leak into the journal-API.
### Preimages
Preimages were, for some reason, integrated into the journal management,
despite not being a consensus-critical data structure. This PR undoes
that.
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This pull request adds a few more performance metrics, specifically:
- The average time cost of an account read
- The average time cost of a storage read
- The rate of account reads
- The rate of storage reads
This pull request fixes the broken feature where the entire storage set is overridden.
Originally, the storage set override was achieved by marking the associated account
as deleted, preventing access to the storage slot on disk. However, since #29520, this
flag is also checked when accessing the account, rendering the account unreachable.
A fix has been applied in this pull request, which re-creates a new state object with all
account metadata inherited.
This pull request adds an additional error check after statedb.IntermediateRoot,
ensuring that no errors occur during this call. This step is essential, as the call might
encounter database errors.
Originally, these metrics were added to track the largest storage wiping.
Since account self-destruction was deprecated with the Cancun fork,
these metrics have become meaningless.
* all: add stateless verifications
* all: simplify witness and integrate it into live geth
---------
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
Always prefetch the account trie while starting the prefetcher.
Co-authored-by: steven <steven@stevendeMacBook-Pro.local>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
rjl493456442
Arran Schlosberg
bitcoin-lightning
Martin HS
Karol Chojnowski
Guillaume Ballet
lightclient
Péter Szilágyi
zhiqiangxu
Ignacio Hagopian
stevemilk
Hteev Oli
jwasinger
Marius van der Wijden
maskpp
TinyFoxy
Steven Wang
牛晓婕