* p2p/discover: move bond logic from table to transport
This commit moves node endpoint verification (bonding) from the table to
the UDP transport implementation. Previously, adding a node to the table
entailed pinging the node if needed. With this change, the ping-back
logic is embedded in the packet handler at a lower level.
It is easy to verify that the basic protocol is unchanged: we still
require a valid pong reply from the node before findnode is accepted.
The node database tracked the time of last ping sent to the node and
time of last valid pong received from the node. Node endpoints are
considered verified when a valid pong is received and the time of last
pong was called 'bond time'. The time of last ping sent was unused. In
this commit, the last ping database entry is repurposed to mean last
ping _received_. This entry is now used to track whether the node needs
to be pinged back.
The other big change is how nodes are added to the table. We used to add
nodes in Table.bond, which ran when a remote node pinged us or when we
encountered the node in a neighbors reply. The transport now adds to the
table directly after the endpoint is verified through ping. To ensure
that the Table can't be filled just by pinging the node repeatedly, we
retain the isInitDone check. During init, only nodes from neighbors
replies are added.
* p2p/discover: reduce findnode failure counter on success
* p2p/discover: remove unused parameter of loadSeedNodes
* p2p/discover: improve ping-back check and comments
* p2p/discover: add neighbors reply nodes always, not just during init
These RPC calls are analogous to Parity's parity_addReservedPeer and
parity_removeReservedPeer.
They are useful for adjusting the trusted peer set during runtime,
without requiring restarting the server.
This commit adds all changes needed for the merge of swarm-network-rewrite.
The changes:
- build: increase linter timeout
- contracts/ens: export ensNode
- log: add Output method and enable fractional seconds in format
- metrics: relax test timeout
- p2p: reduced some log levels, updates to simulation packages
- rpc: increased maxClientSubscriptionBuffer to 20000
ToECDSAPub was unsafe because it returned a non-nil key with nil X, Y in
case of invalid input. This change replaces ToECDSAPub with
UnmarshalPubkey across the codebase.
This applies spec changes from ethereum/EIPs#1049 and adds support for
pluggable identity schemes.
Some care has been taken to make the "v4" scheme standalone. It uses
public APIs only and could be moved out of package enr at any time.
A couple of minor changes were needed to make identity schemes work:
- The sequence number is now updated in Set instead of when signing.
- Record is now copy-safe, i.e. calling Set on a shallow copy doesn't
modify the record it was copied from.
This change removes a peer information from dialing history
when peer is removed from static list. It allows to force a
server to re-dial concrete peer if it is needed.
In our case we are running geth node on mobile devices, and
it is common for a network connection to flap on mobile.
Almost every time it flaps or network connection is changed
from cellular to wifi peers are disconnected with read
timeout. And usually it takes 30 seconds (default expiration
timeout) to recover connection with static peers after
connectivity is restored.
This change allows us to reconnect with peers almost
immediately and it seems harmless enough.
I forgot to change the check in udp.go when I changed Table.bond to be
based on lastPong instead of node presence in db. Rename lastPong to
bondTime and add hasBond so it's clearer what this DB key is used for
now.
* cmd,node,rpc: add allowedHosts to prevent dns rebinding attacks
* p2p,node: Fix bug with dumpconfig introduced in r54aeb8e4c0bb9f0e7a6c67258af67df3b266af3d
* rpc: add wildcard support for rpcallowedhosts + go fmt
* cmd/geth, cmd/utils, node, rpc: ignore direct ip(v4/6) addresses in rpc virtual hostnames check
* http, rpc, utils: make vhosts into map, address review concerns
* node: change log messages to use geth standard (not sprintf)
* rpc: fix spelling
* p2p: add DialRatio for configuration of inbound vs. dialed connections
* p2p: add connection flags to PeerInfo
* p2p/netutil: add SameNet, DistinctNetSet
* p2p/discover: improve revalidation and seeding
This changes node revalidation to be periodic instead of on-demand. This
should prevent issues where dead nodes get stuck in closer buckets
because no other node will ever come along to replace them.
Every 5 seconds (on average), the last node in a random bucket is
checked and moved to the front of the bucket if it is still responding.
If revalidation fails, the last node is replaced by an entry of the
'replacement list' containing recently-seen nodes.
Most close buckets are removed because it's very unlikely we'll ever
encounter a node that would fall into any of those buckets.
Table seeding is also improved: we now require a few minutes of table
membership before considering a node as a potential seed node. This
should make it less likely to store short-lived nodes as potential
seeds.
* p2p/discover: fix nits in UDP transport
We would skip sending neighbors replies if there were fewer than
maxNeighbors results and CheckRelayIP returned an error for the last
one. While here, also resolve a TODO about pong reply tokens.
This commit affects p2p/discv5 "topic discovery" by running it on
the same UDP port where the old discovery works. This is realized
by giving an "unhandled" packet channel to the old v4 discovery
packet handler where all invalid packets are sent. These packets
are then processed by v5. v5 packets are always invalid when
interpreted by v4 and vice versa. This is ensured by adding one
to the first byte of the packet hash in v5 packets.
DiscoveryV5Bootnodes is also changed to point to new bootnodes
that are implementing the changed packet format with modified
hash. Existing and new v5 bootnodes are both running on different
ports ATM.
* core/types, core/vm, eth, tests: regenerate gencodec files
* Makefile: update devtools target
Install protoc-gen-go and print reminders about npm, solc and protoc.
Also switch to github.com/kevinburke/go-bindata because it's more
maintained.
* contracts/ens: update contracts and regenerate with solidity v0.4.19
The newer upstream version of the FIFSRegistrar contract doesn't set the
resolver anymore. The resolver is now deployed separately.
* contracts/release: regenerate with solidity v0.4.19
* contracts/chequebook: fix fallback and regenerate with solidity v0.4.19
The contract didn't have a fallback function, payments would be rejected
when compiled with newer solidity. References to 'mortal' and 'owned'
use the local file system so we can compile without network access.
* p2p/discv5: regenerate with recent stringer
* cmd/faucet: regenerate
* dashboard: regenerate
* eth/tracers: regenerate
* internal/jsre/deps: regenerate
* dashboard: avoid sed -i because it's not portable
* accounts/usbwallet/internal/trezor: fix go generate warnings
p2p/simulations: introduce dialBan
- Refactor simulations/network connection getters to support
avoiding simultaneous dials between two peers If two peers dial
simultaneously, the connection will be dropped to help avoid
that, we essentially lock the connection object with a
timestamp which serves as a ban on dialing for a period of time
(dialBanTimeout).
- The connection getter InitConn can be wrapped and passed to the
nodes via adapters.NodeConfig#Reachable field and then used by
the respective services when they initiate connections. This
massively stablise the emerging connectivity when running with
hundreds of nodes bootstrapping a network.
p2p: add Inbound public method to p2p.Peer
p2p/simulations: Add server id to logs to support debugging
in-memory network simulations when multiple peers are logging.
p2p: SetupConn now returns error. The dialer checks the error and
only calls resolve if the actual TCP dial fails.
This commit introduces a network simulation framework which
can be used to run simulated networks of devp2p nodes. The
intention is to use this for testing protocols, performing
benchmarks and visualising emergent network behaviour.
Using a Timer over Ticker seems to be a lot better, though I cannot fully
account for why that it behaves so (since Ticker should be more bursty, but not
necessarily more active over time, but that may depend on how long window it
uses to decide on when to tick next)
* p2p/discover, p2p/discv5: add marshaling methods to Node
* p2p/netutil: make Netlist decodable from TOML
* common/math: encode nil HexOrDecimal256 as 0x0
* cmd/geth: add --config file flag
* cmd/geth: add missing license header
* eth: prettify Config again, fix tests
* eth: use gasprice.Config instead of duplicating its fields
* eth/gasprice: hide nil default from dumpconfig output
* cmd/geth: hide genesis block in dumpconfig output
* node: make tests compile
* console: fix tests
* cmd/geth: make TOML keys look exactly like Go struct fields
* p2p: use discovery by default
This makes the zero Config slightly more useful. It also fixes package
node tests because Node detects reuse of the datadir through the
NodeDatabase.
* cmd/geth: make ethstats URL settable through config file
* cmd/faucet: fix configuration
* cmd/geth: dedup attach tests
* eth: add comment for DefaultConfig
* eth: pass downloader.SyncMode in Config
This removes the FastSync, LightSync flags in favour of a more
general SyncMode flag.
* cmd/utils: remove jitvm flags
* cmd/utils: make mutually exclusive flag error prettier
It now reads:
Fatal: flags --dev, --testnet can't be used at the same time
* p2p: fix typo
* node: add DefaultConfig, use it for geth
* mobile: add missing NoDiscovery option
* cmd/utils: drop MakeNode
This exposed a couple of places that needed to be updated to use
node.DefaultConfig.
* node: fix typo
* eth: make fast sync the default mode
* cmd/utils: remove IPCApiFlag (unused)
* node: remove default IPC path
Set it in the frontends instead.
* cmd/geth: add --syncmode
* cmd/utils: make --ipcdisable and --ipcpath mutually exclusive
* cmd/utils: don't enable WS, HTTP when setting addr
* cmd/utils: fix --identity
The p2p packages can now be configured to restrict all communication to
a certain subset of IP networks. This feature is meant to be used for
private networks.
The discovery DHT contains a number of hosts with LAN and loopback IPs.
These get relayed because some implementations do not perform any checks
on the IP.
go-ethereum already prevented relay in most cases because it verifies
that the host actually exists before adding it to the local table. But
this verification causes other issues. We have received several reports
where people's VPSs got shut down by hosting providers because sending
packets to random LAN hosts is indistinguishable from a slow port scan.
The new check prevents sending random packets to LAN by discarding LAN
IPs sent by Internet hosts (and loopback IPs from LAN and Internet
hosts). The new check also blacklists almost all currently registered
special-purpose networks assigned by IANA to avoid inciting random
responses from services in the LAN.
As another precaution against abuse of the DHT, ports below 1024 are now
considered invalid.
The new package contains three things for now:
- IP network list parsing and matching
- The WSAEMSGSIZE workaround, which is duplicated in p2p/discover and
p2p/discv5.
Port mapper auto discovery used to run immediately after parsing the
--nat flag, giving it a slight performance boost. But this is becoming
inconvenient because we create node.Node for all geth operations
including account management and bare chain interaction. Delay
autodiscovery until the first use instead, which avoids any network
interaction until the node is actually started.
Felix Lange
ethersphere
Andrey Petrov
Elad
Dmitry Shulyak
Guilherme Salgado
Ivan Daniluk
kiel barry
GagziW
thomasmodeneis
David Huie
JU HYEONG PARK
Anton Evangelatov
Balint Gabor
Felix Lange
Janos Guljas
Péter Szilágyi
Martin Holst Swende
Felföldi Zsolt
zelig
ferhat elmas
holisticode
Zach
Lewis Marshall
Darrel Herbst
Ali Hajimirza
ken10100147
Firescar96
villesundell
Jeffrey Wilcke
Ricardo Catalinas Jiménez