* internal/ethapi/api: cap highest gas limit by account balance for 1559 fee parameters
* accounts/abi/bind: port gas limit cap for 1559 parameters to simulated backend
* accounts/abi/bind: add test for 1559 gas estimates for the simulated backend
* internal/ethapi/api: fix comment
* accounts/abi/bind/backends, internal/ethapi: unify naming style
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
Ticket #23273 found a flaw where we were unable to sign legacy-transactions
using the external signer, even if we're still on non-london network. That's
fixed in this PR.
Additionally, I found that even when supplying all parameters, it was impossible
to sign a london-transaction on an unsynched node. It's a pretty common usecase
that someone wants to sign a transaction using an unsynced 'vanilla' node,
providing all necessary data. Our setDefaults, however, insisted on checking the
current block against the config. This PR therefore adds a case, so that if both
MaxPriorityFeePerGas and MaxFeePerGas are provided, we accept them as given.
OBS This PR fixes a regression -- on current master, we are unable to sign a
london-transaction unless the node is synched, which may break scenarios where
geth (or clef) is used as a cold wallet.
Fixes#23273
* internal/ethapi: revert + fix properly in al tracer
* internal/ethapi: use toMessage instead of creating new message
* internal/ethapi: remove ineffassign
* core: fix invalid unmarshalling, fix test
Co-authored-by: Martin Holst Swende <martin@swende.se>
* internal/ethapi/api: use hexutil.uint for blockCount parameter instead of int for feeHistory
* return hex value for oldestBlock instead of number
* return uint64 from oracle.resolveBlockRange
* eth/gasprice: fixed test
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
* internal/ethapi: add baseFee to RPCMarshalHeader
* internal/ethapi: add FeeCap, Tip and correct GasPrice to EIP-1559 RPCTransaction results
* core,eth,les,internal: add support for tip estimation in gas price oracle
* internal/ethapi,eth/gasprice: don't suggest tip larger than fee cap
* core/types,internal: use correct eip1559 terminology for json marshalling
* eth, internal/ethapi: fix rebase problems
* internal/ethapi: fix rpc name of basefee
* internal/ethapi: address review concerns
* core, eth, internal, les: simplify gasprice oracle (#25)
* core, eth, internal, les: simplify gasprice oracle
* eth/gasprice: fix typo
* internal/ethapi: minor tweak in tx args
* internal/ethapi: calculate basefee for pending block
* internal/ethapi: fix panic
* internal/ethapi, eth/tracers: simplify txargs ToMessage
* internal/ethapi: remove unused param
* core, eth, internal: fix regressions wrt effective gas price in the evm
* eth/gasprice: drop weird debug println
* internal/jsre/deps: hack in 1559 gas conversions into embedded web3
* internal/jsre/deps: hack basFee to decimal conversion
* internal/ethapi: init feecap and tipcap for legacy txs too
* eth, graphql, internal, les: fix gas price suggestion on all combos
* internal/jsre/deps: handle decimal tipcap and feecap
* eth, internal: minor review fixes
* graphql, internal: export max fee cap RPC endpoint
* internal/ethapi: fix crash in transaction_args
* internal/ethapi: minor refactor to make the code safer
Co-authored-by: Ryan Schneider <ryanleeschneider@gmail.com>
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: gary rong <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
There are two transaction parameter structures defined in
the codebase, although for different purposes. But most of
the parameters are shared. So it's nice to reduce the code
duplication by merging them together.
Co-authored-by: Martin Holst Swende <martin@swende.se>
This is the initial implementation of EIP-1559 in packages core/types and core.
Mining, RPC, etc. will be added in subsequent commits.
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
* core/vm: implement AccessListTracer
* eth: implement debug.createAccessList
* core/vm: fixed nil panics in accessListTracer
* eth: better error messages for createAccessList
* eth: some fixes on CreateAccessList
* eth: allow for provided accesslists
* eth: pass accesslist by value
* eth: remove created acocunt from accesslist
* core/vm: simplify access list tracer
* core/vm: unexport accessListTracer
* eth: return best guess if al iteration times out
* eth: return best guess if al iteration times out
* core: docstring, unexport methods
* eth: typo
* internal/ethapi: move createAccessList to eth package
* internal/ethapi: remove reexec from createAccessList
* internal/ethapi: break if al is equal to last run, not if gas is equal
* internal/web3ext: fixed arguments
* core/types: fixed equality check for accesslist
* core/types: no hardcoded vals
* core, internal: simplify access list generation, make it precise
* core/vm: fix typo
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
This removes the duplicated definition of eth_chainID
in package eth and updates the definition in internal/ethapi
to treat chain ID as a bigint.
Co-authored-by: Felix Lange <fjl@twurst.com>
This adds support for EIP-2718 typed transactions as well as EIP-2930
access list transactions (tx type 1). These EIPs are scheduled for the
Berlin fork.
There very few changes to existing APIs in core/types, and several new APIs
to deal with access list transactions. In particular, there are two new
constructor functions for transactions: types.NewTx and types.SignNewTx.
Since the canonical encoding of typed transactions is not RLP-compatible,
Transaction now has new methods for encoding and decoding: MarshalBinary
and UnmarshalBinary.
The existing EIP-155 signer does not support the new transaction types.
All code dealing with transaction signatures should be updated to use the
newer EIP-2930 signer. To make this easier for future updates, we have
added new constructor functions for types.Signer: types.LatestSigner and
types.LatestSignerForChainID.
This change also adds support for the YoloV3 testnet.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Ryan Schneider <ryanleeschneider@gmail.com>
This PR prevents users from submitting transactions without EIP-155 enabled. This behaviour can be overridden by specifying the flag --rpc.allow-unprotected-txs=true.
During the snap and eth refactor, the net_version rpc call was falsely deprecated.
This restores the net_version RPC handler as most eth2 nodes and other software
depend on it.
This commit splits the eth package, separating the handling of eth and snap protocols. It also includes the capability to run snap sync (https://github.com/ethereum/devp2p/blob/master/caps/snap.md) , but does not enable it by default.
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Martin Holst Swende <martin@swende.se>
ToHex was deprecated a couple years ago. The last remaining use
was in ToHexArray, which itself only had a single call site.
This just moves ToHexArray near its only remaining call site and
implements it using hexutil.Encode. This changes the default behaviour
of ToHexArray and with it the behaviour of eth_getProof. Previously we
encoded an empty slice as 0, now the empty slice is encoded as 0x.
This allows users to estimate gas on top of arbitrary blocks as well as pending and latest.
Tracing on pending is useful for most users as it takes into account the current txpool while
tracing on latest might be useful for users that have little to know knowledge of the current
transactions in the network.
If blockNrOrHash is not specified, estimateGas defaults to pending
This PR significantly changes the APIs for instantiating Ethereum nodes in
a Go program. The new APIs are not backwards-compatible, but we feel that
this is made up for by the much simpler way of registering services on
node.Node. You can find more information and rationale in the design
document: https://gist.github.com/renaynay/5bec2de19fde66f4d04c535fd24f0775.
There is also a new feature in Node's Go API: it is now possible to
register arbitrary handlers on the user-facing HTTP server. In geth, this
facility is used to enable GraphQL.
There is a single minor change relevant for geth users in this PR: The
GraphQL API is no longer available separately from the JSON-RPC HTTP
server. If you want GraphQL, you need to enable it using the
./geth --http --graphql flag combination.
The --graphql.port and --graphql.addr flags are no longer available.
This change introduces garbage collection for the light client. Historical
chain data is deleted periodically. If you want to disable the GC, use
the --light.nopruning flag.
* internal/ethapi: return revert reason for eth_call
* internal/ethapi: moved revert reason logic to doCall
* accounts/abi/bind/backends: added revert reason logic to simulated backend
* internal/ethapi: fixed linting error
* internal/ethapi: check if require reason can be unpacked
* internal/ethapi: better error logic
* internal/ethapi: simplify logic
* internal/ethapi: return vmError()
* internal/ethapi: move handling of revert out of docall
* graphql: removed revert logic until spec change
* rpc: internal/ethapi: added custom error types
* graphql: use returndata instead of return
Return() checks if there is an error. If an error is found, we return nil.
For most use cases it can be beneficial to return the output even if there
was an error. This code should be changed anyway once the spec supports
error reasons in graphql responses
* accounts/abi/bind/backends: added tests for revert reason
* internal/ethapi: add errorCode to revert error
* internal/ethapi: add errorCode of 3 to revertError
* internal/ethapi: unified estimateGasErrors, simplified logic
* internal/ethapi: unified handling of errors in DoEstimateGas
* rpc: print error data field
* accounts/abi/bind/backends: unify simulatedBackend and RPC
* internal/ethapi: added binary data to revertError data
* internal/ethapi: refactored unpacking logic into newRevertError
* accounts/abi/bind/backends: fix EstimateGas
* accounts, console, internal, rpc: minor error interface cleanups
* Revert "accounts, console, internal, rpc: minor error interface cleanups"
This reverts commit 2d3ef53c53.
* re-apply the good parts of 2d3ef53c53
* rpc: add test for returning server error data from client
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
* accounts/abi/bind/backend, internal/ethapi: recap gas limit with balance
* accounts, internal: address comment and fix lint
* accounts, internal: extend log message
* tiny nits to format hexutil.Big and nil properly
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* all: seperate consensus error and evm internal error
There are actually two types of error will be returned when
a tranaction/message call is executed: (a) consensus error
(b) evm internal error. The former should be converted to
a consensus issue, e.g. The sender doesn't enough asset to
purchase the gas it specifies. The latter is allowed since
evm itself is a blackbox and internal error is allowed to happen.
This PR emphasizes the difference by introducing a executionResult
structure. The evm error is embedded inside. So if any error
returned, it indicates consensus issue happens.
And also this PR improve the `EstimateGas` API to return the concrete
revert reason if the transaction always fails
* all: polish
* accounts/abi/bind/backends: add tests
* accounts/abi/bind/backends, internal: cleanup error message
* all: address comments
* core: fix lint
* accounts, core, eth, internal: address comments
* accounts, internal: resolve revert reason if possible
* accounts, internal: address comments
ToMessage is used to convert between ethapi.CallArgs and types.Message.
It reduces the length of the DoCall method by about half by abstracting out
the conversion between the CallArgs and the Message. This should improve the
code's maintainability and reusability.
Prior to this change, eth_call changed the balance of the sender account in the
EVM environment to 2^256 wei to cover the gas cost of the call execution.
We've had this behavior for a long time even though it's super confusing.
This commit sets the default call gasprice to zero instead of updating the balance,
which is better because it makes eth_call semantics less surprising. Removing
the built-in balance assignment also makes balance overrides work as expected.
This makes eth_call and eth_estimateGas use the zero address
as sender when the "from" parameter is not supplied.
Co-authored-by: Felix Lange <fjl@twurst.com>
* graphql, internal/ethapi: extend eth_call
This PR offers the third option parameter for eth_call API.
Caller can specify a batch of contracts for overriding the
original account metadata(nonce, balance, code, state).
It has a few advantages:
* It's friendly for debugging
* It's can make on-chain contract lighter for getting rid of
state access functions
* core, internal: address comments
* accounts/mananger, internal/ethapi/api: Add new function AllAccounts on account manager to remove the duplication code on getting all wallets accounts
* Rename to Accounts
* Rename to AllAccounts
This change ensures 'blockHash', 'blockNumber' and 'transactionIndex'
are set to null for pending transactions. This behavior is required by
the Ethereum JSON-RPC spec.
* accounts: add note about backing up the keystore
* cmd, accounts: move the printout to accountCreate
* internal, signer: add info when new account is created via rpc
* cmd, internal, signer: split logs
* cmd/geth: make account new output a bit more verbose
* accounts, core, internal, node: Add support for smartcard wallets
* accounts, internal: Changes in response to review
* vendor: pull in missing go-echd library
* accounts/scwallet, console: user friendly card opening
* accounts/scwallet: ordered wallets, tighter events, derivation logs
* accounts, console: frendly card errors, support pin unblock
* accounts/scwallet: fix crypto API change
* accounts/scwallet: rebase and update
* Fix some linter issues
* Remove the direct dependency on libpcsclite
Instead, use a go library that communicates with pcscd over a socket.
Also update the changes introduced by @gravityblast since this PR's
inception
* Temporary fix to the ADBU status call
* fix wallet status update
This is a temporary fix, better checks need to
be performed once the whole process has been
validated.
* Fix key derivation
* Add some documentation
* Update a comment to reflect the workings of the updated system
* Vendor keycard-go/derivationpath
* Formatting fixes
* Add instructions on how to install the card
* Achieve full transaction signature+sending
* PK derivation has to be supported by the card
* Fix linter issues
* Upgrade to keycard app v2.1.1
* Set gballet as codeowner of the smartcard wallet dir
* fix unnecessary condition linter warning
* refuse to overwrite the master key of a previously initialized card
* refresh the account list when initializing the card
* Update the card preparation instructions based on review feedback
* 'sanitize' JSON input
Co-Authored-By: gballet <gballet@gmail.com>
* Apply suggestions from code review
Co-Authored-By: gballet <gballet@gmail.com>
* fix a serialization error
* more review feedback
* More review feedback
* Can now specify the number of empty accounts to derive
* Fix rebase error: include norm package
* Update bip-39 ref and remove ebfe/scard from vendor
* Add missing dependency
* signer/clef: make use of json-rpc notification
* signer: tidy up output of OnApprovedTx
* accounts/external, signer: implement remote signing of text, make accounts_sign take hexdata
* clef: added basic testscript
* signer, external, api: add clique signing test to debug rpc, fix clique signing in clef
* signer: fix clique interoperability between geth and clef
* clef: rename networkid switch to chainid
* clef: enable chainid flag
* clef, signer: minor changes from review
* clef: more tests for signer
* Initial work on a graphql API
* Added receipts, and more transaction fields.
* Finish receipts, add logs
* Add transactionCount to block
* Add types and .
* Update Block type to be compatible with ethql
* Rename nonce to transactionCount in Account, to be compatible with ethql
* Update transaction, receipt and log to match ethql
* Add query operator, for a range of blocks
* Added ommerCount to Block
* Add transactionAt and ommerAt to Block
* Added sendRawTransaction mutation
* Add Call and EstimateGas to graphQL API
* Refactored to use hexutil.Bytes instead of HexBytes
* Replace BigNum with hexutil.Big
* Refactor call and estimateGas to use ethapi struct type
* Replace ethgraphql.Address with common.Address
* Replace ethgraphql.Hash with common.Hash
* Converted most quantities to Long instead of Int
* Add support for logs
* Fix bug in runFilter
* Restructured Transaction to work primarily with headers, so uncle data is reported properly
* Add gasPrice API
* Add protocolVersion API
* Add syncing API
* Moved schema into its own source file
* Move some single use args types into anonymous structs
* Add doc-comments
* Fixed backend fetching to use context
* Added (very) basic tests
* Add documentation to the graphql schema
* Fix reversion for formatting of big numbers
* Correct spelling error
* s/BigInt/Long/
* Update common/types.go
* Fixes in response to review
* Fix lint error
* Updated calls on private functions
* Fix typo in graphql.go
* Rollback ethapi breaking changes for graphql support
Co-Authored-By: Arachnid <arachnid@notdot.net>
Until this commit, when sending an RPC request that called `NewEVM`, a blank `vm.Config`
would be taken so as to set some options, based on the default configuration. If some extra
configuration switches were passed to the blockchain, those would be ignored.
This PR adds a function to get the config from the blockchain, and this is what is now used
for RPC calls.
Some subsequent changes need to be made, see https://github.com/ethereum/go-ethereum/pull/17955#pullrequestreview-182237244
for the details of the discussion.
* first impl of eth_getProof
* fixed docu
* added comments and refactored based on comments from holiman
* created structs
* handle errors correctly
* change Value to *hexutil.Big in order to have the same output as parity
* use ProofList as return type
ToECDSAPub was unsafe because it returned a non-nil key with nil X, Y in
case of invalid input. This change replaces ToECDSAPub with
UnmarshalPubkey across the codebase.
Most of these methods did not contain all the relevant information
inside the object and were not using a similar formatting type.
Moreover, the existence of a suboptimal String method breaks usage
with more advanced data dumping tools like go-spew.
* core: remove redundant storage of transactions and receipts
* core, eth, internal: new transaction schema usage polishes
* eth: implement upgrade mechanism for db deduplication
* core, eth: drop old sequential key db upgrader
* eth: close last iterator on successful db upgrage
* core: prefix the lookup entries to make their purpose clearer
With this commit, core/state's access to the underlying key/value database is
mediated through an interface. Database errors are tracked in StateDB and
returned by CommitTo or the new Error method.
Motivation for this change: We can remove the light client's duplicated copy of
core/state. The light client now supports node iteration, so tracing and storage
enumeration can work with the light client (not implemented in this commit).
More context in the bug This solves the problems of transactions being
submitted simultaneously, and getting the same nonce, due to the gap (due to
signing) between nonce-issuance and nonce-update. With this PR, a lock will
need to be acquired whenever a nonce is used, and released when the transaction
is submitted or errors out.
This commit is a preparation for the upcoming metropolis hardfork. It
prepares the state, core and vm packages such that integration with
metropolis becomes less of a hassle.
* Difficulty calculation requires header instead of individual
parameters
* statedb.StartRecord renamed to statedb.Prepare and added Finalise
method required by metropolis, which removes unwanted accounts from
the state (i.e. selfdestruct)
* State keeps record of destructed objects (in addition to dirty
objects)
* core/vm pre-compiles may now return errors
* core/vm pre-compiles gas check now take the full byte slice as argument
instead of just the size
* core/vm now keeps several hard-fork instruction tables instead of a
single instruction table and removes the need for hard-fork checks in
the instructions
* core/vm contains a empty restruction function which is added in
preparation of metropolis write-only mode operations
* Adds the bn256 curve
* Adds and sets the metropolis chain config block parameters (2^64-1)
陈佳
Martin Holst Swende
lightclient
Felföldi Zsolt
gary rong
Marius van der Wijden
Mark
Péter Szilágyi
aaronbuchwald
piersy
Alex Prut
rene
Yang Hau
Martin Michlmayr
William Morriss
Prince Sinha
Felix Lange
Guillaume Ballet
Ryan Schneider
Roc Yu
Kurkó Mihály
Nick Johnson
Kris Shinn
Yondon Fu
Paweł Bylica
Kenso Trabing
Simon Jentzsch
Liang ZOU
Felix Lange
kiel barry
Steven Roose
rhaps107
yoza
Pulyak Viktor
tsarpaul
slumber1122
Ernesto del Toro
Miya Chen
Egon Elbre
Jeffrey Wilcke