This changes the forkID calculation to ignore time-based forks that occurred before the
genesis block. It's supposed to be done this way because the spec says:
> If a chain is configured to start with a non-Frontier ruleset already in its genesis, that is NOT considered a fork.
This PR removes the newly added txpool.Transaction wrapper type, and instead adds a way
of keeping the blob sidecar within types.Transaction. It's better this way because most
code in go-ethereum does not care about blob transactions, and probably never will. This
will start mattering especially on the client side of RPC, where all APIs are based on
types.Transaction. Users need to be able to use the same signing flows they already
have.
However, since blobs are only allowed in some places but not others, we will now need to
add checks to avoid creating invalid blocks. I'm still trying to figure out the best place
to do some of these. The way I have it currently is as follows:
- In block validation (import), txs are verified not to have a blob sidecar.
- In miner, we strip off the sidecar when committing the transaction into the block.
- In TxPool validation, txs must have a sidecar to be added into the blobpool.
- Note there is a special case here: when transactions are re-added because of a chain
reorg, we cannot use the transactions gathered from the old chain blocks as-is,
because they will be missing their blobs. This was previously handled by storing the
blobs into the 'blobpool limbo'. The code has now changed to store the full
transaction in the limbo instead, but it might be confusing for code readers why we're
not simply adding the types.Transaction we already have.
Code changes summary:
- txpool.Transaction removed and all uses replaced by types.Transaction again
- blobpool now stores types.Transaction instead of defining its own blobTx format for storage
- the blobpool limbo now stores types.Transaction instead of storing only the blobs
- checks to validate the presence/absence of the blob sidecar added in certain critical places
The Go authors updated golang/x/ext to change the function signature of the slices sort method.
It's an entire shitshow now because x/ext is not tagged, so everyone's codebase just
picked a new version that some other dep depends on, causing our code to fail building.
This PR updates the dep on our code too and does all the refactorings to follow upstream...
This change removes PoW header syncing related code from LES and also deletes
duplicated packages les/catalyst, les/downloader and les/fetcher. These package copies
were created because people wanted to make changes in their eth/ counterparts, but weren't
able to adapt LES code to the API changes.
* core/state, light, les: make signature of ContractCode hash-independent
* push current state for feedback
* les: fix unit test
* core, les, light: fix les unittests
* core/state, trie, les, light: fix state iterator
* core, les: address comments
* les: fix lint
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This removes the feature where top nodes of the proof can be elided.
It was intended to be used by the LES server, to save bandwidth
when the client had already fetched parts of the state and only needed
some extra nodes to complete the proof. Alas, it never got implemented
in the client.
* all: move main transaction pool into a subpool
* go.mod: remove superfluous updates
* core/txpool: review fixes, handle txs rejected by all subpools
* core/txpool: typos
* core/txpool: abstraction prep work for secondary pools (blob pool)
* core/txpool: leave subpool concepts to a followup pr
* les: fix tests using hard coded errors
* core/txpool: use bitmaps instead of maps for tx type filtering
Adds an optional config parameter to eth_call which allows users to override block context fields (same functionality that was added to traceCall in #24871)
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
* all: remove notion of trusted checkpoints in the post-merge world
* light: remove unused function
* eth/ethconfig, les: remove unused config option
* les: make linter happy
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
In this PR, all TryXXX(e.g. TryGet) APIs of trie are renamed to XXX(e.g. Get) with an error returned.
The original XXX(e.g. Get) APIs are renamed to MustXXX(e.g. MustGet) and does not return any error -- they print a log output. A future PR will change the behaviour to panic on errorrs.
Here, the core.Message interface turns into a plain struct and
types.Message gets removed.
This is a breaking change to packages core and core/types. While we do
not promise API stability for package core, we do for core/types. An
exception can be made for types.Message, since it doesn't have any
purpose apart from invoking the state transition in package core.
types.Message was also marked deprecated by the same commit it
got added in, 4dca5d4db7 (November 2016).
The core.Message interface was added in December 2014, in commit
db494170dc, for the purpose of 'testing' state transitions. It's the
same change that made transaction struct fields private. Before that,
the state transition used *types.Transaction directly.
Over time, multiple implementations of the interface accrued across
different packages, since constructing a Message is required whenever
one wants to invoke the state transition. These implementations all
looked very similar, a struct with private fields exposing the fields
as accessor methods.
By changing Message into a struct with public fields we can remove all
these useless interface implementations. It will also hopefully
simplify future changes to the type with less updates to apply across
all of go-ethereum when a field is added to Message.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
The EmptyRootHash and EmptyCodeHash are defined everywhere in the codebase, this PR replaces all of them with unified one defined in core/types package, and also defines constants for TxRoot, WithdrawalsRoot and UncleRoot
This PR is a (superior) alternative to https://github.com/ethereum/go-ethereum/pull/26708, it handles deprecation, primarily two specific cases.
`rand.Seed` is typically used in two ways
- `rand.Seed(time.Now().UnixNano())` -- we seed it, just to be sure to get some random, and not always get the same thing on every run. This is not needed, with global seeding, so those are just removed.
- `rand.Seed(1)` this is typically done to ensure we have a stable test. If we rely on this, we need to fix up the tests to use a deterministic prng-source. A few occurrences like this has been replaced with a proper custom source.
`rand.Read` has been replaced by `crypto/rand`.`Read` in this PR.
Logs stored on disk have minimal information. Contextual information such as block
number, index of log in block, index of transaction in block are filled in upon request.
We can fill in all these fields only having the block header and list of receipts.
But determining the transaction hash of a log requires the block body.
The goal of this PR is postponing this retrieval until we are sure we the transaction hash.
It happens often that the header bloom filter signals there might be matches in a block,
but after actually checking them reveals the logs do not match. We want to avoid fetching
the body in this case.
Note that this changes the semantics of Backend.GetLogs. Downstream callers of
GetLogs now assume log context fields have not been derived, and need to call
DeriveFields on the logs if necessary.
* common, core, eth, les, trie: make prque generic
* les/vflux/server: fixed issues in priorityPool
* common, core, eth, les, trie: make priority also generic in prque
* les/flowcontrol: add test case for priority accumulator overflow
* les/flowcontrol: avoid priority value overflow
* common/prque: use int priority in some tests
No need to convert to int64 when we can just change the type used by the
queue.
* common/prque: remove comment about int64 range
---------
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR moves core/beacon to beacon/engine so that beacon-chain related code has its own top level package which also can house the the beacon lightclient-code.
This PR moves some trie-related db accessor methods to a different file, and also removes the schema type. Instead of the schema type, a string is used to distinguish between hashbased/pathbased db accessors.
This also moves some code from trie package to rawdb package.
This PR is intended to be a no-functionality-change prep PR for #25963 .
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This change implements withdrawals as specified in EIP-4895.
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: marioevz <marioevz@gmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR builds on #26299, but also updates the tests to the most recent version, which includes tests regarding TheMerge.
This change adds checks to the beacon consensus engine, making it more strict in validating the pre- and post-headers, and not relying on the caller to have already correctly sanitized the headers/blocks.
This PR introduces a node scheme abstraction. The interface is only implemented by `hashScheme` at the moment, but will be extended by `pathScheme` very soon.
Apart from that, a few changes are also included which is worth mentioning:
- port the changes in the stacktrie, tracking the path prefix of nodes during commit
- use ethdb.Database for constructing trie.Database. This is not necessary right now, but it is required for path-based used to open reverse diff freezer
lightclient
Felix Lange
Péter Szilágyi
rjl493456442
Felföldi Zsolt
Guillaume Ballet
Dan Laine
Paul Lange
ucwong
Delweng
makcandrov
Sina Mahmoodi
Stephen Guo
aaronbuchwald
Roberto Bayardo
Martin Holst Swende
Marius van der Wijden
Mark Tyneway
s7v7nislands