This PR fixes some issues with benchmarks
- [x] Removes log output from a log-test
- [x] Avoids a `nil`-defer in `triedb/pathdb`
- [x] Fixes some crashes re tracers
- [x] Refactors a very resource-expensive benchmark for blobpol.
**NOTE**: this rewrite touches live production code (a little bit), as
it makes the validator-function used by the blobpool configurable.
- [x] Switch some benches over to use pebble over leveldb
- [x] reduce mem overhead in the setup-phase of some tests
- [x] Marks some tests with a long setup-phase to be skipped if `-short`
is specified (where long is on the order of tens of seconds). Ideally,
in my opinion, one should be able to run with `-benchtime 10ms -short`
and sanity-check all tests very quickly.
- [x] Drops some metrics-bechmark which times the speed of `copy`.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
Changelog: https://golangci-lint.run/product/changelog/#1610
Removes `exportloopref` (no longer needed), replaces it with
`copyloopvar` which is basically the opposite.
Also adds:
- `durationcheck`
- `gocheckcompilerdirectives`
- `reassign`
- `mirror`
- `tenv`
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This change includes a lot of things, listed below.
### Split up interfaces, write vs read
The interfaces have been split up into one write-interface and one read-interface, with `Snapshot` being the gateway from write to read. This simplifies the semantics _a lot_.
Example of splitting up an interface into one readonly 'snapshot' part, and one updatable writeonly part:
```golang
type MeterSnapshot interface {
Count() int64
Rate1() float64
Rate5() float64
Rate15() float64
RateMean() float64
}
// Meters count events to produce exponentially-weighted moving average rates
// at one-, five-, and fifteen-minutes and a mean rate.
type Meter interface {
Mark(int64)
Snapshot() MeterSnapshot
Stop()
}
```
### A note about concurrency
This PR makes the concurrency model clearer. We have actual meters and snapshot of meters. The `meter` is the thing which can be accessed from the registry, and updates can be made to it.
- For all `meters`, (`Gauge`, `Timer` etc), it is assumed that they are accessed by different threads, making updates. Therefore, all `meters` update-methods (`Inc`, `Add`, `Update`, `Clear` etc) need to be concurrency-safe.
- All `meters` have a `Snapshot()` method. This method is _usually_ called from one thread, a backend-exporter. But it's fully possible to have several exporters simultaneously: therefore this method should also be concurrency-safe.
TLDR: `meter`s are accessible via registry, all their methods must be concurrency-safe.
For all `Snapshot`s, it is assumed that an individual exporter-thread has obtained a `meter` from the registry, and called the `Snapshot` method to obtain a readonly snapshot. This snapshot is _not_ guaranteed to be concurrency-safe. There's no need for a snapshot to be concurrency-safe, since exporters should not share snapshots.
Note, though: that by happenstance a lot of the snapshots _are_ concurrency-safe, being unmutable minimal representations of a value. Only the more complex ones are _not_ threadsafe, those that lazily calculate things like `Variance()`, `Mean()`.
Example of how a background exporter typically works, obtaining the snapshot and sequentially accessing the non-threadsafe methods in it:
```golang
ms := metric.Snapshot()
...
fields := map[string]interface{}{
"count": ms.Count(),
"max": ms.Max(),
"mean": ms.Mean(),
"min": ms.Min(),
"stddev": ms.StdDev(),
"variance": ms.Variance(),
```
TLDR: `snapshots` are not guaranteed to be concurrency-safe (but often are).
### Sample changes
I also changed the `Sample` type: previously, it iterated the samples fully every time `Mean()`,`Sum()`, `Min()` or `Max()` was invoked. Since we now have readonly base data, we can just iterate it once, in the constructor, and set all four values at once.
The same thing has been done for runtimehistogram.
### ResettingTimer API
Back when ResettingTImer was implemented, as part of https://github.com/ethereum/go-ethereum/pull/15910, Anton implemented a `Percentiles` on the new type. However, the method did not conform to the other existing types which also had a `Percentiles`.
1. The existing ones, on input, took `0.5` to mean `50%`. Anton used `50` to mean `50%`.
2. The existing ones returned `float64` outputs, thus interpolating between values. A value-set of `0, 10`, at `50%` would return `5`, whereas Anton's would return either `0` or `10`.
This PR removes the 'new' version, and uses only the 'legacy' percentiles, also for the ResettingTimer type.
The resetting timer snapshot was also defined so that it would expose the internal values. This has been removed, and getters for `Max, Min, Mean` have been added instead.
### Unexport types
A lot of types were exported, but do not need to be. This PR unexports quite a lot of them.
This chang creates a GaugeInfo metrics type for registering informational (textual) metrics, e.g. geth version number. It also improves the testing for backend-exporters, and uses a shared subpackage in 'internal' to provide sample datasets and ordered registry.
Implements #21783
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
The Go authors updated golang/x/ext to change the function signature of the slices sort method.
It's an entire shitshow now because x/ext is not tagged, so everyone's codebase just
picked a new version that some other dep depends on, causing our code to fail building.
This PR updates the dep on our code too and does all the refactorings to follow upstream...
Makes the float-gauges lock-free
name old time/op new time/op delta
CounterFloat64Parallel-8 1.45µs ±10% 0.85µs ± 6% -41.65% (p=0.008 n=5+5)
---------
Co-authored-by: Exca-DK <dev@DESKTOP-RI45P4J.localdomain>
Co-authored-by: Martin Holst Swende <martin@swende.se>
This change switches to use the smaller influxdata/influxdb1-client package instead of depending on the whole infuxdb package. The new smaller client is very similar to the influxdb-v2 client, which made it possible to refactor the two reporters to reuse code a lot more.
This PR adds counter metrics for the CPU system and the Geth process.
Currently the only metrics available for these items are gauges. Gauges are
fine when the consumer scrapes metrics data at the same interval as Geth
produces new values (every 3 seconds), but it is likely that most consumers
will not scrape that often. Intervals of 10, 15, or maybe even 30 seconds
are probably more common.
So the problem is, how does the consumer estimate what the CPU was doing in
between scrapes. With a counter, it's easy ... you just subtract two
successive values and divide by the time to get a nice, accurate average.
But with a gauge, you can't do that. A gauge reading is an instantaneous
picture of what was happening at that moment, but it gives you no idea
about what was going on between scrapes. Taking an average of values is
meaningless.
This PR changes metrics collection to actually measure the time interval between collections, rather
than assume 3 seconds. I did some ad hoc profiling, and on slower hardware (eg, my Raspberry Pi 4)
I routinely saw intervals between 3.3 - 3.5 seconds, with some being as high as 4.5 seconds. This
will generally cause the CPU gauge readings to be too high, and in some cases can cause impossibly
large values for the CPU load metrics (eg. greater than 400 for a 4 core CPU).
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR is a (superior) alternative to https://github.com/ethereum/go-ethereum/pull/26708, it handles deprecation, primarily two specific cases.
`rand.Seed` is typically used in two ways
- `rand.Seed(time.Now().UnixNano())` -- we seed it, just to be sure to get some random, and not always get the same thing on every run. This is not needed, with global seeding, so those are just removed.
- `rand.Seed(1)` this is typically done to ensure we have a stable test. If we rely on this, we need to fix up the tests to use a deterministic prng-source. A few occurrences like this has been replaced with a proper custom source.
`rand.Read` has been replaced by `crypto/rand`.`Read` in this PR.
This changes how we read performance metrics from the Go runtime. Instead
of using runtime.ReadMemStats, we now rely on the API provided by package
runtime/metrics.
runtime/metrics provides more accurate information. For example, the new
interface has better reporting of memory use. In my testing, the reported
value of held memory more accurately reflects the usage reported by the OS.
The semantics of metrics system/memory/allocs and system/memory/frees have
changed to report amounts in bytes. ReadMemStats only reported the count of
allocations in number-of-objects. This is imprecise: 'tiny objects' are not
counted because the runtime allocates them in batches; and certain
improvements in allocation behavior, such as struct size optimizations,
will be less visible when the number of allocs doesn't change.
Changing allocation reports to be in bytes makes it appear in graphs that
lots more is being allocated. I don't think that's a problem because this
metric is primarily interesting for geth developers.
The metric system/memory/pauses has been changed to report statistical
values from the histogram provided by the runtime. Its name in influxdb has
changed from geth.system/memory/pauses.meter to
geth.system/memory/pauses.histogram.
We also have a new histogram metric, system/cpu/schedlatency, reporting the
Go scheduler latency.
This changes the CI / release builds to use the latest Go version. It also
upgrades golangci-lint to a newer version compatible with Go 1.19.
In Go 1.19, godoc has gained official support for links and lists. The
syntax for code blocks in doc comments has changed and now requires a
leading tab character. gofmt adapts comments to the new syntax
automatically, so there are a lot of comment re-formatting changes in this
PR. We need to apply the new format in order to pass the CI lint stage with
Go 1.19.
With the linter upgrade, I have decided to disable 'gosec' - it produces
too many false-positive warnings. The 'deadcode' and 'varcheck' linters
have also been removed because golangci-lint warns about them being
unmaintained. 'unused' provides similar coverage and we already have it
enabled, so we don't lose much with this change.
This enables the following linters
- typecheck
- unused
- staticcheck
- bidichk
- durationcheck
- exportloopref
- gosec
WIth a few exceptions.
- We use a deprecated protobuf in trezor. I didn't want to mess with that, since I cannot meaningfully test any changes there.
- The deprecated TypeMux is used in a few places still, so the warning for it is silenced for now.
- Using string type in context.WithValue is apparently wrong, one should use a custom type, to prevent collisions between different places in the hierarchy of callers. That should be fixed at some point, but may require some attention.
- The warnings for using weak random generator are squashed, since we use a lot of random without need for cryptographic guarantees.
This PR adds flag to enable InfluxDB v2 (--metrics.influxdbv2), flags for v2-specific features (--metrics.influxdb.token, --metrics.influxdb.bucket), also carries over addition of support for specifying organization (--metrics.influxdb.organization), but still retains backwards compatibility with InfluxDB v1.
Martin HS
Wukingbow
levisyin
Halimao
Aaron Chen
persmor
Nathan
georgehao
Péter Szilágyi
cui fliter
zoereco
Dimitris Apostolou
Zoro
Jorge
Ömer Faruk Irmak
Dan Laine
Exca-DK
s7v7nislands
Delweng
turboboost55
Shude Li
ucwong
Felix Lange
Justin Traglia
rjl493456442
Håvard Anda Estensen
jwasinger
Mathijs de Bruin