go-ethereum/les/backend.go

291 lines
9.6 KiB
Go
Raw Normal View History

2016-11-08 19:01:56 -06:00
// Copyright 2016 The go-ethereum Authors
2016-10-13 22:51:29 -05:00
// This file is part of the go-ethereum library.
//
// The go-ethereum library is free software: you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// The go-ethereum library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
// Package les implements the Light Ethereum Subprotocol.
package les
import (
"fmt"
"sync"
2016-10-13 22:51:29 -05:00
"time"
"github.com/ethereum/go-ethereum/accounts"
"github.com/ethereum/go-ethereum/common"
"github.com/ethereum/go-ethereum/common/hexutil"
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 05:32:48 -06:00
"github.com/ethereum/go-ethereum/common/mclock"
"github.com/ethereum/go-ethereum/consensus"
2016-10-13 22:51:29 -05:00
"github.com/ethereum/go-ethereum/core"
"github.com/ethereum/go-ethereum/core/bloombits"
"github.com/ethereum/go-ethereum/core/rawdb"
2016-10-13 22:51:29 -05:00
"github.com/ethereum/go-ethereum/core/types"
"github.com/ethereum/go-ethereum/eth"
"github.com/ethereum/go-ethereum/eth/downloader"
"github.com/ethereum/go-ethereum/eth/filters"
"github.com/ethereum/go-ethereum/eth/gasprice"
"github.com/ethereum/go-ethereum/event"
"github.com/ethereum/go-ethereum/internal/ethapi"
"github.com/ethereum/go-ethereum/light"
"github.com/ethereum/go-ethereum/log"
2016-10-13 22:51:29 -05:00
"github.com/ethereum/go-ethereum/node"
"github.com/ethereum/go-ethereum/p2p"
"github.com/ethereum/go-ethereum/p2p/discv5"
"github.com/ethereum/go-ethereum/params"
2016-10-13 22:51:29 -05:00
rpc "github.com/ethereum/go-ethereum/rpc"
)
type LightEthereum struct {
lesCommons
2016-10-13 22:51:29 -05:00
odr *LesOdr
relay *LesTxRelay
chainConfig *params.ChainConfig
2016-10-13 22:51:29 -05:00
// Channel for shutting down the service
shutdownChan chan bool
2016-10-13 22:51:29 -05:00
// Handlers
peers *peerSet
txPool *light.TxPool
blockchain *light.LightChain
serverPool *serverPool
reqDist *requestDistributor
retriever *retrieveManager
bloomRequests chan chan *bloombits.Retrieval // Channel receiving bloom data retrieval requests
bloomIndexer *core.ChainIndexer
2016-10-13 22:51:29 -05:00
ApiBackend *LesApiBackend
eventMux *event.TypeMux
engine consensus.Engine
2016-10-13 22:51:29 -05:00
accountManager *accounts.Manager
networkId uint64
2016-10-13 22:51:29 -05:00
netRPCService *ethapi.PublicNetAPI
wg sync.WaitGroup
2016-10-13 22:51:29 -05:00
}
func New(ctx *node.ServiceContext, config *eth.Config) (*LightEthereum, error) {
chainDb, err := ctx.OpenDatabase("lightchaindata", config.DatabaseCache, config.DatabaseHandles, "eth/db/chaindata/")
2016-10-13 22:51:29 -05:00
if err != nil {
return nil, err
}
chainConfig, genesisHash, genesisErr := core.SetupGenesisBlockWithOverride(chainDb, config.Genesis, config.ConstantinopleOverride)
if _, isCompat := genesisErr.(*params.ConfigCompatError); genesisErr != nil && !isCompat {
return nil, genesisErr
2016-10-13 22:51:29 -05:00
}
log.Info("Initialised chain configuration", "config", chainConfig)
peers := newPeerSet()
quitSync := make(chan struct{})
leth := &LightEthereum{
lesCommons: lesCommons{
chainDb: chainDb,
config: config,
iConfig: light.DefaultClientIndexerConfig,
},
chainConfig: chainConfig,
eventMux: ctx.EventMux,
peers: peers,
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 05:32:48 -06:00
reqDist: newRequestDistributor(peers, quitSync, &mclock.System{}),
accountManager: ctx.AccountManager,
engine: eth.CreateConsensusEngine(ctx, chainConfig, &config.Ethash, nil, false, chainDb),
shutdownChan: make(chan bool),
networkId: config.NetworkId,
bloomRequests: make(chan chan *bloombits.Retrieval),
bloomIndexer: eth.NewBloomIndexer(chainDb, params.BloomBitsBlocksClient, params.HelperTrieConfirmations),
2016-10-13 22:51:29 -05:00
}
var trustedNodes []string
if leth.config.ULC != nil {
trustedNodes = leth.config.ULC.TrustedServers
}
leth.relay = NewLesTxRelay(peers, leth.reqDist)
leth.serverPool = newServerPool(chainDb, quitSync, &leth.wg, trustedNodes)
leth.retriever = newRetrieveManager(peers, leth.reqDist, leth.serverPool)
leth.odr = NewLesOdr(chainDb, light.DefaultClientIndexerConfig, leth.retriever)
leth.chtIndexer = light.NewChtIndexer(chainDb, leth.odr, params.CHTFrequencyClient, params.HelperTrieConfirmations)
leth.bloomTrieIndexer = light.NewBloomTrieIndexer(chainDb, leth.odr, params.BloomBitsBlocksClient, params.BloomTrieFrequency)
leth.odr.SetIndexers(leth.chtIndexer, leth.bloomTrieIndexer, leth.bloomIndexer)
// Note: NewLightChain adds the trusted checkpoint so it needs an ODR with
// indexers already set but not started yet
if leth.blockchain, err = light.NewLightChain(leth.odr, leth.chainConfig, leth.engine); err != nil {
2016-10-13 22:51:29 -05:00
return nil, err
}
// Note: AddChildIndexer starts the update process for the child
leth.bloomIndexer.AddChildIndexer(leth.bloomTrieIndexer)
leth.chtIndexer.Start(leth.blockchain)
leth.bloomIndexer.Start(leth.blockchain)
// Rewind the chain in case of an incompatible config upgrade.
if compat, ok := genesisErr.(*params.ConfigCompatError); ok {
log.Warn("Rewinding chain to upgrade configuration", "err", compat)
leth.blockchain.SetHead(compat.RewindTo)
rawdb.WriteChainConfig(chainDb, genesisHash, chainConfig)
}
2016-10-13 22:51:29 -05:00
leth.txPool = light.NewTxPool(leth.chainConfig, leth.blockchain, leth.relay)
if leth.protocolManager, err = NewProtocolManager(
leth.chainConfig,
light.DefaultClientIndexerConfig,
true,
config.NetworkId,
leth.eventMux,
leth.engine,
leth.peers,
leth.blockchain,
nil,
chainDb,
leth.odr,
leth.relay,
leth.serverPool,
quitSync,
&leth.wg,
config.ULC); err != nil {
2016-10-13 22:51:29 -05:00
return nil, err
}
if leth.protocolManager.isULCEnabled() {
log.Warn("Ultra light client is enabled", "trustedNodes", len(leth.protocolManager.ulc.trustedKeys), "minTrustedFraction", leth.protocolManager.ulc.minTrustedFraction)
leth.blockchain.DisableCheckFreq()
}
leth.ApiBackend = &LesApiBackend{leth, nil}
cmd/geth: add --config file flag (#13875) * p2p/discover, p2p/discv5: add marshaling methods to Node * p2p/netutil: make Netlist decodable from TOML * common/math: encode nil HexOrDecimal256 as 0x0 * cmd/geth: add --config file flag * cmd/geth: add missing license header * eth: prettify Config again, fix tests * eth: use gasprice.Config instead of duplicating its fields * eth/gasprice: hide nil default from dumpconfig output * cmd/geth: hide genesis block in dumpconfig output * node: make tests compile * console: fix tests * cmd/geth: make TOML keys look exactly like Go struct fields * p2p: use discovery by default This makes the zero Config slightly more useful. It also fixes package node tests because Node detects reuse of the datadir through the NodeDatabase. * cmd/geth: make ethstats URL settable through config file * cmd/faucet: fix configuration * cmd/geth: dedup attach tests * eth: add comment for DefaultConfig * eth: pass downloader.SyncMode in Config This removes the FastSync, LightSync flags in favour of a more general SyncMode flag. * cmd/utils: remove jitvm flags * cmd/utils: make mutually exclusive flag error prettier It now reads: Fatal: flags --dev, --testnet can't be used at the same time * p2p: fix typo * node: add DefaultConfig, use it for geth * mobile: add missing NoDiscovery option * cmd/utils: drop MakeNode This exposed a couple of places that needed to be updated to use node.DefaultConfig. * node: fix typo * eth: make fast sync the default mode * cmd/utils: remove IPCApiFlag (unused) * node: remove default IPC path Set it in the frontends instead. * cmd/geth: add --syncmode * cmd/utils: make --ipcdisable and --ipcpath mutually exclusive * cmd/utils: don't enable WS, HTTP when setting addr * cmd/utils: fix --identity
2017-04-12 09:27:23 -05:00
gpoParams := config.GPO
if gpoParams.Default == nil {
gpoParams.Default = config.MinerGasPrice
}
leth.ApiBackend.gpo = gasprice.NewOracle(leth.ApiBackend, gpoParams)
return leth, nil
2016-10-13 22:51:29 -05:00
}
func lesTopic(genesisHash common.Hash, protocolVersion uint) discv5.Topic {
var name string
switch protocolVersion {
case lpv1:
name = "LES"
case lpv2:
name = "LES2"
default:
panic(nil)
}
return discv5.Topic(name + "@" + common.Bytes2Hex(genesisHash.Bytes()[0:8]))
}
2016-10-13 22:51:29 -05:00
type LightDummyAPI struct{}
// Etherbase is the address that mining rewards will be send to
func (s *LightDummyAPI) Etherbase() (common.Address, error) {
return common.Address{}, fmt.Errorf("not supported")
}
// Coinbase is the address that mining rewards will be send to (alias for Etherbase)
func (s *LightDummyAPI) Coinbase() (common.Address, error) {
return common.Address{}, fmt.Errorf("not supported")
}
// Hashrate returns the POW hashrate
func (s *LightDummyAPI) Hashrate() hexutil.Uint {
return 0
2016-10-13 22:51:29 -05:00
}
// Mining returns an indication if this node is currently mining.
func (s *LightDummyAPI) Mining() bool {
return false
}
// APIs returns the collection of RPC services the ethereum package offers.
// NOTE, some of these services probably need to be moved to somewhere else.
func (s *LightEthereum) APIs() []rpc.API {
return append(ethapi.GetAPIs(s.ApiBackend), []rpc.API{
2016-10-13 22:51:29 -05:00
{
Namespace: "eth",
Version: "1.0",
Service: &LightDummyAPI{},
Public: true,
}, {
Namespace: "eth",
Version: "1.0",
Service: downloader.NewPublicDownloaderAPI(s.protocolManager.downloader, s.eventMux),
Public: true,
}, {
Namespace: "eth",
Version: "1.0",
Service: filters.NewPublicFilterAPI(s.ApiBackend, true),
Public: true,
}, {
Namespace: "net",
Version: "1.0",
Service: s.netRPCService,
Public: true,
},
}...)
}
func (s *LightEthereum) ResetWithGenesisBlock(gb *types.Block) {
s.blockchain.ResetWithGenesisBlock(gb)
}
func (s *LightEthereum) BlockChain() *light.LightChain { return s.blockchain }
func (s *LightEthereum) TxPool() *light.TxPool { return s.txPool }
func (s *LightEthereum) Engine() consensus.Engine { return s.engine }
func (s *LightEthereum) LesVersion() int { return int(ClientProtocolVersions[0]) }
2016-10-13 22:51:29 -05:00
func (s *LightEthereum) Downloader() *downloader.Downloader { return s.protocolManager.downloader }
func (s *LightEthereum) EventMux() *event.TypeMux { return s.eventMux }
2016-10-13 22:51:29 -05:00
// Protocols implements node.Service, returning all the currently configured
// network protocols to start.
func (s *LightEthereum) Protocols() []p2p.Protocol {
return s.makeProtocols(ClientProtocolVersions)
2016-10-13 22:51:29 -05:00
}
// Start implements node.Service, starting all internal goroutines needed by the
// Ethereum protocol implementation.
func (s *LightEthereum) Start(srvr *p2p.Server) error {
log.Warn("Light client mode is an experimental feature")
s.startBloomHandlers(params.BloomBitsBlocksClient)
s.netRPCService = ethapi.NewPublicNetAPI(srvr, s.networkId)
// clients are searching for the first advertised protocol in the list
protocolVersion := AdvertiseProtocolVersions[0]
s.serverPool.start(srvr, lesTopic(s.blockchain.Genesis().Hash(), protocolVersion))
s.protocolManager.Start(s.config.LightPeers)
2016-10-13 22:51:29 -05:00
return nil
}
// Stop implements node.Service, terminating all internal goroutines used by the
// Ethereum protocol.
func (s *LightEthereum) Stop() error {
s.odr.Stop()
s.bloomIndexer.Close()
s.chtIndexer.Close()
2016-10-13 22:51:29 -05:00
s.blockchain.Stop()
s.protocolManager.Stop()
s.txPool.Stop()
s.engine.Close()
2016-10-13 22:51:29 -05:00
s.eventMux.Stop()
time.Sleep(time.Millisecond * 200)
s.chainDb.Close()
close(s.shutdownChan)
return nil
}