go-ethereum/swarm/pss/notify/notify_test.go

265 lines
6.8 KiB
Go
Raw Normal View History

package notify
import (
"bytes"
"context"
"flag"
"fmt"
"os"
"testing"
"time"
"github.com/ethereum/go-ethereum/common/hexutil"
"github.com/ethereum/go-ethereum/crypto"
"github.com/ethereum/go-ethereum/log"
"github.com/ethereum/go-ethereum/node"
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 17:59:00 -05:00
"github.com/ethereum/go-ethereum/p2p/enode"
"github.com/ethereum/go-ethereum/p2p/simulations"
"github.com/ethereum/go-ethereum/p2p/simulations/adapters"
"github.com/ethereum/go-ethereum/swarm/network"
"github.com/ethereum/go-ethereum/swarm/pss"
"github.com/ethereum/go-ethereum/swarm/state"
whisper "github.com/ethereum/go-ethereum/whisper/whisperv5"
)
var (
loglevel = flag.Int("l", 3, "loglevel")
psses map[string]*pss.Pss
w *whisper.Whisper
wapi *whisper.PublicWhisperAPI
)
func init() {
flag.Parse()
hs := log.StreamHandler(os.Stderr, log.TerminalFormat(true))
hf := log.LvlFilterHandler(log.Lvl(*loglevel), hs)
h := log.CallerFileHandler(hf)
log.Root().SetHandler(h)
w = whisper.New(&whisper.DefaultConfig)
wapi = whisper.NewPublicWhisperAPI(w)
psses = make(map[string]*pss.Pss)
}
// Creates a client node and notifier node
// Client sends pss notifications requests
// notifier sends initial notification with symmetric key, and
// second notification symmetrically encrypted
func TestStart(t *testing.T) {
adapter := adapters.NewSimAdapter(newServices(false))
net := simulations.NewNetwork(adapter, &simulations.NetworkConfig{
ID: "0",
DefaultService: "bzz",
})
leftNodeConf := adapters.RandomNodeConfig()
leftNodeConf.Services = []string{"bzz", "pss"}
leftNode, err := net.NewNodeWithConfig(leftNodeConf)
if err != nil {
t.Fatal(err)
}
err = net.Start(leftNode.ID())
if err != nil {
t.Fatal(err)
}
rightNodeConf := adapters.RandomNodeConfig()
rightNodeConf.Services = []string{"bzz", "pss"}
rightNode, err := net.NewNodeWithConfig(rightNodeConf)
if err != nil {
t.Fatal(err)
}
err = net.Start(rightNode.ID())
if err != nil {
t.Fatal(err)
}
err = net.Connect(rightNode.ID(), leftNode.ID())
if err != nil {
t.Fatal(err)
}
leftRpc, err := leftNode.Client()
if err != nil {
t.Fatal(err)
}
rightRpc, err := rightNode.Client()
if err != nil {
t.Fatal(err)
}
var leftAddr string
err = leftRpc.Call(&leftAddr, "pss_baseAddr")
if err != nil {
t.Fatal(err)
}
var rightAddr string
err = rightRpc.Call(&rightAddr, "pss_baseAddr")
if err != nil {
t.Fatal(err)
}
var leftPub string
err = leftRpc.Call(&leftPub, "pss_getPublicKey")
if err != nil {
t.Fatal(err)
}
var rightPub string
err = rightRpc.Call(&rightPub, "pss_getPublicKey")
if err != nil {
t.Fatal(err)
}
rsrcName := "foo.eth"
rsrcTopic := pss.BytesToTopic([]byte(rsrcName))
// wait for kademlia table to populate
time.Sleep(time.Second)
ctx, cancel := context.WithTimeout(context.Background(), time.Second*2)
defer cancel()
rmsgC := make(chan *pss.APIMsg)
rightSub, err := rightRpc.Subscribe(ctx, "pss", rmsgC, "receive", controlTopic, false, false)
if err != nil {
t.Fatal(err)
}
defer rightSub.Unsubscribe()
updateC := make(chan []byte)
var updateMsg []byte
ctrlClient := NewController(psses[rightPub])
ctrlNotifier := NewController(psses[leftPub])
ctrlNotifier.NewNotifier("foo.eth", 2, updateC)
pubkeybytes, err := hexutil.Decode(leftPub)
if err != nil {
t.Fatal(err)
}
pubkey, err := crypto.UnmarshalPubkey(pubkeybytes)
if err != nil {
t.Fatal(err)
}
addrbytes, err := hexutil.Decode(leftAddr)
if err != nil {
t.Fatal(err)
}
copyOfUpdateMsg := make([]byte, len(updateMsg))
copy(copyOfUpdateMsg, updateMsg)
ctrlClientError := make(chan error, 1)
ctrlClient.Subscribe(rsrcName, pubkey, addrbytes, func(s string, b []byte) error {
if s != "foo.eth" || !bytes.Equal(copyOfUpdateMsg, b) {
ctrlClientError <- fmt.Errorf("unexpected result in client handler: '%s':'%x'", s, b)
} else {
log.Info("client handler receive", "s", s, "b", b)
}
return nil
})
var inMsg *pss.APIMsg
select {
case inMsg = <-rmsgC:
case err := <-ctrlClientError:
t.Fatal(err)
case <-ctx.Done():
t.Fatal(ctx.Err())
}
dMsg, err := NewMsgFromPayload(inMsg.Msg)
if err != nil {
t.Fatal(err)
}
if dMsg.namestring != rsrcName {
t.Fatalf("expected name '%s', got '%s'", rsrcName, dMsg.namestring)
}
if !bytes.Equal(dMsg.Payload[:len(updateMsg)], updateMsg) {
t.Fatalf("expected payload first %d bytes '%x', got '%x'", len(updateMsg), updateMsg, dMsg.Payload[:len(updateMsg)])
}
if len(updateMsg)+symKeyLength != len(dMsg.Payload) {
t.Fatalf("expected payload length %d, have %d", len(updateMsg)+symKeyLength, len(dMsg.Payload))
}
rightSubUpdate, err := rightRpc.Subscribe(ctx, "pss", rmsgC, "receive", rsrcTopic, false, false)
if err != nil {
t.Fatal(err)
}
defer rightSubUpdate.Unsubscribe()
updateMsg = []byte("plugh")
updateC <- updateMsg
select {
case inMsg = <-rmsgC:
case <-ctx.Done():
log.Error("timed out waiting for msg", "topic", fmt.Sprintf("%x", rsrcTopic))
t.Fatal(ctx.Err())
}
dMsg, err = NewMsgFromPayload(inMsg.Msg)
if err != nil {
t.Fatal(err)
}
if dMsg.namestring != rsrcName {
t.Fatalf("expected name %s, got %s", rsrcName, dMsg.namestring)
}
if !bytes.Equal(dMsg.Payload, updateMsg) {
t.Fatalf("expected payload '%x', got '%x'", updateMsg, dMsg.Payload)
}
}
func newServices(allowRaw bool) adapters.Services {
stateStore := state.NewInmemoryStore()
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 17:59:00 -05:00
kademlias := make(map[enode.ID]*network.Kademlia)
kademlia := func(id enode.ID) *network.Kademlia {
if k, ok := kademlias[id]; ok {
return k
}
params := network.NewKadParams()
params.NeighbourhoodSize = 2
params.MaxBinSize = 3
params.MinBinSize = 1
params.MaxRetries = 1000
params.RetryExponent = 2
params.RetryInterval = 1000000
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 17:59:00 -05:00
kademlias[id] = network.NewKademlia(id[:], params)
return kademlias[id]
}
return adapters.Services{
"pss": func(ctx *adapters.ServiceContext) (node.Service, error) {
ctxlocal, cancel := context.WithTimeout(context.Background(), time.Second)
defer cancel()
keys, err := wapi.NewKeyPair(ctxlocal)
if err != nil {
return nil, err
}
privkey, err := w.GetPrivateKey(keys)
if err != nil {
return nil, err
}
pssp := pss.NewPssParams().WithPrivateKey(privkey)
pssp.MsgTTL = time.Second * 30
pssp.AllowRaw = allowRaw
pskad := kademlia(ctx.Config.ID)
ps, err := pss.NewPss(pskad, pssp)
if err != nil {
return nil, err
}
//psses[common.ToHex(crypto.FromECDSAPub(&privkey.PublicKey))] = ps
psses[hexutil.Encode(crypto.FromECDSAPub(&privkey.PublicKey))] = ps
return ps, nil
},
"bzz": func(ctx *adapters.ServiceContext) (node.Service, error) {
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 17:59:00 -05:00
addr := network.NewAddr(ctx.Config.Node())
hp := network.NewHiveParams()
hp.Discovery = false
config := &network.BzzConfig{
OverlayAddr: addr.Over(),
UnderlayAddr: addr.Under(),
HiveParams: hp,
}
return network.NewBzz(config, kademlia(ctx.Config.ID), stateStore, nil, nil), nil
},
}
}