diff --git a/.gitignore b/.gitignore
new file mode 100644
index 00000000..478cda0b
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,5 @@
+*~
+Makefile
+aclocal.m4
+depcomp
+.deps/
diff --git a/src/AUTHORS b/AUTHORS
similarity index 100%
rename from src/AUTHORS
rename to AUTHORS
diff --git a/src/COPYING b/COPYING
similarity index 100%
rename from src/COPYING
rename to COPYING
diff --git a/src/INSTALL b/INSTALL
similarity index 100%
rename from src/INSTALL
rename to INSTALL
diff --git a/src/Makefile b/Makefile.in
similarity index 65%
rename from src/Makefile
rename to Makefile.in
index 50766592..92a0ff81 100644
--- a/src/Makefile
+++ b/Makefile.in
@@ -1,37 +1,32 @@
 #
-# Makefile.  Generated from Makefile.in by configure.
+# @configure_input@
 #
 
 
-package = getdns
-version = 0.320
-tarname	= getdns
+package = @PACKAGE_NAME@
+version = @PACKAGE_VERSION@
+tarname	= @PACKAGE_TARNAME@
 distdir	= $(tarname)-$(version)
 
-prefix = /usr/local
-exec_prefix = ${prefix}
-bindir = ${exec_prefix}/bin
-
-srcdir = .
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+bindir = @bindir@
 
+srcdir = @srcdir@
+VPATH = @srcdir@
 
 default:
-	cd common && $(MAKE)
+	cd src && $(MAKE) $@
 
-all : default test 
-
-test:
-	cd test && $(MAKE) $@
+all : default 
 
 clean:
-	cd common && $(MAKE) $@
-	cd test && $(MAKE) $@
+	cd src && $(MAKE) $@
 	rm -f *.o
 
 distclean:
-	cd common && $(MAKE) $@
-	cd test && $(MAKE) $@
-	rm -f libgetdns*.so config.log config.status Makefile
+	cd src && $(MAKE) $@
+	rm -f config.log config.status Makefile
 	rm -fR autom4te.cache
 
 $(distdir): FORCE
@@ -50,8 +45,8 @@ distcheck: $(distdir).tar.gz
 	cd $(distdir) && $(MAKE) DESTDIR=$${PWD}/_inst uninstall
 	@remaining="`find $${PWD}/$(distdir)/_inst -type f | wc -l`"; \
 	if test "$${remaining}" -ne	0; then
-	  echo "@@@	$${remaining} file(s) remaining	in stage directory!"; \
-	  exit 1; \
+	echo "@@@	$${remaining} file(s) remaining	in stage directory!"; \
+	exit 1; \
 	fi
 	cd $(distdir) && $(MAKE) clean
 	rm -rf $(distdir)
@@ -59,7 +54,7 @@ distcheck: $(distdir).tar.gz
 
 Makefile: Makefile.in config.status
 	./config.status $@
-
+ 
 configure.status: configure
 	./config.status --recheck
 
diff --git a/src/NEWS b/NEWS
similarity index 100%
rename from src/NEWS
rename to NEWS
diff --git a/src/README b/README
similarity index 100%
rename from src/README
rename to README
diff --git a/src/configure b/configure
similarity index 99%
rename from src/configure
rename to configure
index c3282f1c..56db59a6 100755
--- a/src/configure
+++ b/configure
@@ -3628,7 +3628,7 @@ _ACEOF
   esac
 
 
-ac_config_files="$ac_config_files Makefile common/Makefile test/Makefile"
+ac_config_files="$ac_config_files Makefile src/common/Makefile src/test/Makefile"
 
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
@@ -4336,8 +4336,8 @@ for ac_config_target in $ac_config_targets
 do
   case $ac_config_target in
     "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-    "common/Makefile") CONFIG_FILES="$CONFIG_FILES common/Makefile" ;;
-    "test/Makefile") CONFIG_FILES="$CONFIG_FILES test/Makefile" ;;
+    "src/common/Makefile") CONFIG_FILES="$CONFIG_FILES src/common/Makefile" ;;
+    "src/test/Makefile") CONFIG_FILES="$CONFIG_FILES src/test/Makefile" ;;
 
   *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
   esac
diff --git a/src/configure.ac b/configure.ac
similarity index 92%
rename from src/configure.ac
rename to configure.ac
index 79732316..253b1f6f 100644
--- a/src/configure.ac
+++ b/configure.ac
@@ -27,5 +27,5 @@ AC_TYPE_UINT32_T
 AC_TYPE_UINT64_T
 AC_TYPE_UINT8_T
 
-AC_CONFIG_FILES([Makefile common/Makefile test/Makefile])
+AC_CONFIG_FILES([Makefile src/common/Makefile src/test/Makefile])
 AC_OUTPUT
diff --git a/src/.deps/example_all_functions.Po b/src/.deps/example_all_functions.Po
deleted file mode 100644
index 9ce06a81..00000000
--- a/src/.deps/example_all_functions.Po
+++ /dev/null
@@ -1 +0,0 @@
-# dummy
diff --git a/src/.deps/example_simple_answers.Po b/src/.deps/example_simple_answers.Po
deleted file mode 100644
index e2a083eb..00000000
--- a/src/.deps/example_simple_answers.Po
+++ /dev/null
@@ -1,161 +0,0 @@
-example_simple_answers.o: example_simple_answers.c /usr/include/stdio.h \
- /usr/include/features.h /usr/include/i386-linux-gnu/bits/predefs.h \
- /usr/include/i386-linux-gnu/sys/cdefs.h \
- /usr/include/i386-linux-gnu/bits/wordsize.h \
- /usr/include/i386-linux-gnu/gnu/stubs.h \
- /usr/include/i386-linux-gnu/gnu/stubs-32.h \
- /usr/lib/gcc/i686-linux-gnu/4.6.1/include/stddef.h \
- /usr/include/i386-linux-gnu/bits/types.h \
- /usr/include/i386-linux-gnu/bits/typesizes.h /usr/include/libio.h \
- /usr/include/_G_config.h /usr/include/wchar.h \
- /usr/lib/gcc/i686-linux-gnu/4.6.1/include/stdarg.h \
- /usr/include/i386-linux-gnu/bits/stdio_lim.h \
- /usr/include/i386-linux-gnu/bits/sys_errlist.h \
- /usr/include/i386-linux-gnu/bits/stdio.h \
- /usr/include/i386-linux-gnu/bits/stdio2.h \
- /usr/lib/gcc/i686-linux-gnu/4.6.1/include/stdint.h /usr/include/stdint.h \
- /usr/include/i386-linux-gnu/bits/wchar.h /usr/include/stdlib.h \
- /usr/include/i386-linux-gnu/bits/stdlib.h /usr/include/string.h \
- /usr/include/i386-linux-gnu/bits/string.h \
- /usr/include/i386-linux-gnu/bits/string2.h /usr/include/endian.h \
- /usr/include/i386-linux-gnu/bits/endian.h \
- /usr/include/i386-linux-gnu/bits/string3.h /usr/include/inttypes.h \
- getdns_libevent.h /usr/include/event2/event.h \
- /usr/include/event2/event-config.h \
- /usr/include/i386-linux-gnu/sys/types.h /usr/include/time.h \
- /usr/include/i386-linux-gnu/sys/time.h \
- /usr/include/i386-linux-gnu/bits/time.h \
- /usr/include/i386-linux-gnu/sys/select.h \
- /usr/include/i386-linux-gnu/bits/select.h \
- /usr/include/i386-linux-gnu/bits/sigset.h /usr/include/event2/util.h \
- /usr/include/netdb.h /usr/include/netinet/in.h \
- /usr/include/i386-linux-gnu/sys/socket.h \
- /usr/include/i386-linux-gnu/sys/uio.h \
- /usr/include/i386-linux-gnu/bits/uio.h \
- /usr/include/i386-linux-gnu/bits/socket.h \
- /usr/include/i386-linux-gnu/bits/sockaddr.h \
- /usr/include/i386-linux-gnu/asm/socket.h \
- /usr/include/asm-generic/socket.h \
- /usr/include/i386-linux-gnu/asm/sockios.h \
- /usr/include/asm-generic/sockios.h \
- /usr/include/i386-linux-gnu/bits/socket2.h \
- /usr/include/i386-linux-gnu/bits/in.h \
- /usr/include/i386-linux-gnu/bits/byteswap.h \
- /usr/include/i386-linux-gnu/bits/netdb.h getdns_core_only.h \
- /usr/lib/gcc/i686-linux-gnu/4.6.1/include/stdbool.h
-
-/usr/include/stdio.h:
-
-/usr/include/features.h:
-
-/usr/include/i386-linux-gnu/bits/predefs.h:
-
-/usr/include/i386-linux-gnu/sys/cdefs.h:
-
-/usr/include/i386-linux-gnu/bits/wordsize.h:
-
-/usr/include/i386-linux-gnu/gnu/stubs.h:
-
-/usr/include/i386-linux-gnu/gnu/stubs-32.h:
-
-/usr/lib/gcc/i686-linux-gnu/4.6.1/include/stddef.h:
-
-/usr/include/i386-linux-gnu/bits/types.h:
-
-/usr/include/i386-linux-gnu/bits/typesizes.h:
-
-/usr/include/libio.h:
-
-/usr/include/_G_config.h:
-
-/usr/include/wchar.h:
-
-/usr/lib/gcc/i686-linux-gnu/4.6.1/include/stdarg.h:
-
-/usr/include/i386-linux-gnu/bits/stdio_lim.h:
-
-/usr/include/i386-linux-gnu/bits/sys_errlist.h:
-
-/usr/include/i386-linux-gnu/bits/stdio.h:
-
-/usr/include/i386-linux-gnu/bits/stdio2.h:
-
-/usr/lib/gcc/i686-linux-gnu/4.6.1/include/stdint.h:
-
-/usr/include/stdint.h:
-
-/usr/include/i386-linux-gnu/bits/wchar.h:
-
-/usr/include/stdlib.h:
-
-/usr/include/i386-linux-gnu/bits/stdlib.h:
-
-/usr/include/string.h:
-
-/usr/include/i386-linux-gnu/bits/string.h:
-
-/usr/include/i386-linux-gnu/bits/string2.h:
-
-/usr/include/endian.h:
-
-/usr/include/i386-linux-gnu/bits/endian.h:
-
-/usr/include/i386-linux-gnu/bits/string3.h:
-
-/usr/include/inttypes.h:
-
-getdns_libevent.h:
-
-/usr/include/event2/event.h:
-
-/usr/include/event2/event-config.h:
-
-/usr/include/i386-linux-gnu/sys/types.h:
-
-/usr/include/time.h:
-
-/usr/include/i386-linux-gnu/sys/time.h:
-
-/usr/include/i386-linux-gnu/bits/time.h:
-
-/usr/include/i386-linux-gnu/sys/select.h:
-
-/usr/include/i386-linux-gnu/bits/select.h:
-
-/usr/include/i386-linux-gnu/bits/sigset.h:
-
-/usr/include/event2/util.h:
-
-/usr/include/netdb.h:
-
-/usr/include/netinet/in.h:
-
-/usr/include/i386-linux-gnu/sys/socket.h:
-
-/usr/include/i386-linux-gnu/sys/uio.h:
-
-/usr/include/i386-linux-gnu/bits/uio.h:
-
-/usr/include/i386-linux-gnu/bits/socket.h:
-
-/usr/include/i386-linux-gnu/bits/sockaddr.h:
-
-/usr/include/i386-linux-gnu/asm/socket.h:
-
-/usr/include/asm-generic/socket.h:
-
-/usr/include/i386-linux-gnu/asm/sockios.h:
-
-/usr/include/asm-generic/sockios.h:
-
-/usr/include/i386-linux-gnu/bits/socket2.h:
-
-/usr/include/i386-linux-gnu/bits/in.h:
-
-/usr/include/i386-linux-gnu/bits/byteswap.h:
-
-/usr/include/i386-linux-gnu/bits/netdb.h:
-
-getdns_core_only.h:
-
-/usr/lib/gcc/i686-linux-gnu/4.6.1/include/stdbool.h:
diff --git a/src/.deps/example_synchronous.Po b/src/.deps/example_synchronous.Po
deleted file mode 100644
index 9ce06a81..00000000
--- a/src/.deps/example_synchronous.Po
+++ /dev/null
@@ -1 +0,0 @@
-# dummy
diff --git a/src/.deps/example_tree.Po b/src/.deps/example_tree.Po
deleted file mode 100644
index 9ce06a81..00000000
--- a/src/.deps/example_tree.Po
+++ /dev/null
@@ -1 +0,0 @@
-# dummy
diff --git a/src/common/Makefile b/src/common/Makefile
deleted file mode 100644
index 897a597e..00000000
--- a/src/common/Makefile
+++ /dev/null
@@ -1,70 +0,0 @@
-#
-# common/Makefile.  Generated from Makefile.in by configure.
-#
-
-package = getdns
-version = 0.320
-tarname = getdns
-distdir = $(tarname)-$(version)
-
-prefix = /usr/local
-exec_prefix = ${prefix}
-bindir = ${exec_prefix}/bin
-
-srcdir = .
-
-
-CC=gcc
-CFLAGS=-Wall -g -fPIC -I$(srcdir)/ -std=c99
-LDFLAGS=-L. 
-LDLIBS=-levent_core -lldns -lgetdns
-PROGRAMS=example-simple-answers example-tree example-all-functions example-synchronous
-
-.SUFFIXES: .c .o .a .lo .h
-
-.c.o:
-	$(CC) $(CFLAGS) -c $< -o $@
-
-all: libgetdns example-simple-answers example-tree example-all-functions example-synchronous
-
-libgetdns: getdns_sync.o getdns_context.o getdns_list.o getdns_dict.o getdns_address.o getdns_convert.o getdns_general.o getdns_hostname.o getdns_service.o getdns_validate_dnssec.o
-	$(CC) $(CFLAGS) -shared -o libgetdns.so $^
-
-clean:
-	rm -f *.o $(PROGRAMS) libgetdns.so
-
-distclean : clean
-	rm -f Makefile config.status config.log
-	rm -Rf autom4te.cache
-
-$(distdir): FORCE
-	mkdir -p $(distdir)/src
-	cp configure.ac $(distdir)
-	cp configure $(distdir)
-	cp Makefile.in $(distdir)
-	cp src/Makefile.in $(distdir)/src
-
-distcheck: $(distdir).tar.gz
-	gzip -cd $(distdir).tar.gz | tar xvf -
-	cd $(distdir) && ./configure
-	cd $(distdir) && $(MAKE) all
-	cd $(distdir) && $(MAKE) check
-	cd $(distdir) && $(MAKE) DESTDIR=$${PWD}/_inst install
-	cd $(distdir) && $(MAKE) DESTDIR=$${PWD}/_inst uninstall
-	@remaining="`find $${PWD}/$(distdir)/_inst -type f | wc -l`"; \
-	if test "$${remaining}" -ne 0; then
-	  echo "@@@ $${remaining} file(s) remaining in stage directory!"; \
-	  exit 1; \
-	fi
-	cd $(distdir) && $(MAKE) clean
-	rm -rf $(distdir)
-	@echo "*** Package $(distdir).tar.gz is ready for distribution"
-
-Makefile: Makefile.in ../config.status
-	cd .. && ./config.status $@
-
-configure.status: configure
-	cd .. && ./config.status --recheck
-
-.PHONY: clean
-
diff --git a/src/common/Makefile.in b/src/common/Makefile.in
index c28e6cd9..6000b878 100644
--- a/src/common/Makefile.in
+++ b/src/common/Makefile.in
@@ -15,8 +15,8 @@ srcdir = @srcdir@
 VPATH = @srcdir@
 
 CC=gcc
-CFLAGS=-Wall -g -fPIC -I$(srcdir)/ -std=c99
-LDFLAGS=-L. 
+CFLAGS=-Wall -g -fPIC -I$(srcdir)/ -I /usr/local/include -std=c99
+LDFLAGS=-L. -L/usr/local/lib
 LDLIBS=-levent_core -lldns -lgetdns
 PROGRAMS=example-simple-answers example-tree example-all-functions example-synchronous
 
@@ -28,7 +28,7 @@ PROGRAMS=example-simple-answers example-tree example-all-functions example-synch
 all: libgetdns example-simple-answers example-tree example-all-functions example-synchronous
 
 libgetdns: getdns_sync.o getdns_context.o getdns_list.o getdns_dict.o getdns_address.o getdns_convert.o getdns_general.o getdns_hostname.o getdns_service.o getdns_validate_dnssec.o
-	$(CC) $(CFLAGS) -shared -o libgetdns.so $^
+	$(CC) $(CFLAGS) -shared -o libgetdns.so $?
 
 clean:
 	rm -f *.o $(PROGRAMS) libgetdns.so
diff --git a/src/common/Makefile.in~ b/src/common/Makefile.in~
deleted file mode 100644
index 05e9015f..00000000
--- a/src/common/Makefile.in~
+++ /dev/null
@@ -1,64 +0,0 @@
-#
-# @configure_input@
-#
-
-package = @PACKAGE_NAME@
-version = @PACKAGE_VERSION@
-tarname = @PACKAGE_TARNAME@
-distdir = $(tarname)-$(version)
-
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-bindir = @bindir@
-
-srcdir = @srcdir@
-VPATH = @srcdir@
-
-CC=gcc
-CFLAGS=-g -I. -std=c99
-LDFLAGS=-L. 
-LDLIBS=-levent_core -lldns -lgetdns
-PROGRAMS=example-simple-answers example-tree example-all-functions example-synchronous
-
-all: libgetdns example-simple-answers example-tree example-all-functions example-synchronous
-
-getdns_core_only.o: getdns_core_only.c
-	$(CC) -c -Wall -fPIC $(CFLAGS) $^
-
-libgetdns: getdns_core_only.c
-	$(CC) $(CFLAGS) -shared -o libgetdns.so $^
-
-clean:
-	rm -f *.o $(PROGRAMS) libgetdns.so
-
-$(distdir): FORCE
-	mkdir -p $(distdir)/src
-	cp configure.ac $(distdir)
-	cp configure $(distdir)
-	cp Makefile.in $(distdir)
-	cp src/Makefile.in $(distdir)/src
-
-distcheck: $(distdir).tar.gz
-	gzip -cd $(distdir).tar.gz | tar xvf -
-	cd $(distdir) && ./configure
-	cd $(distdir) && $(MAKE) all
-	cd $(distdir) && $(MAKE) check
-	cd $(distdir) && $(MAKE) DESTDIR=$${PWD}/_inst install
-	cd $(distdir) && $(MAKE) DESTDIR=$${PWD}/_inst uninstall
-	@remaining="`find $${PWD}/$(distdir)/_inst -type f | wc -l`"; \
-	if test "$${remaining}" -ne 0; then
-	  echo "@@@ $${remaining} file(s) remaining in stage directory!"; \
-	  exit 1; \
-	fi
-	cd $(distdir) && $(MAKE) clean
-	rm -rf $(distdir)
-	@echo "*** Package $(distdir).tar.gz is ready for distribution"
-
-Makefile: Makefile.in ../config.status
-	cd .. && ./config.status $@
-
-configure.status: configure
-	cd .. && ./config.status --recheck
-
-.PHONY: clean
-
diff --git a/src/common/aclocal.m4 b/src/common/aclocal.m4
deleted file mode 100644
index 1bc55f42..00000000
--- a/src/common/aclocal.m4
+++ /dev/null
@@ -1,951 +0,0 @@
-# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_AUTOCONF_VERSION],
-  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
-[m4_warning([this file was generated for autoconf 2.68.
-You have another version of autoconf.  It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically `autoreconf'.])])
-
-# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.11'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.11.1], [],
-      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too.  Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.11.1])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
-  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
-
-# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory.  The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run.  This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-#    fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-#    fails if $ac_aux_dir is absolute,
-#    fails when called from a subdirectory in a VPATH build with
-#          a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
-#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-#   MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH.  The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL                                            -*- Autoconf -*-
-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 9
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
-	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-m4_define([_AM_COND_VALUE_$1], [$2])dnl
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-  AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 10
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery.  Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
-       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
-       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
-       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
-                   [depcc="$$1"   am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
-               [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_$1_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
-  fi
-  am__universal=false
-  m4_case([$1], [CC],
-    [case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac],
-    [CXX],
-    [case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac])
-
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
-    am__obj=sub/conftest.${OBJEXT-o}
-    am__minus_obj="-o $am__obj"
-    case $depmode in
-    gcc)
-      # This depmode causes a compiler race in universal mode.
-      test "$am__universal" = false || continue
-      ;;
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
-      # not run yet.  These depmodes are late enough in the game, and
-      # so weak that their functioning should not be impacted.
-      am__obj=conftest.${OBJEXT-o}
-      am__minus_obj=
-      ;;
-    none) break ;;
-    esac
-    if depmode=$depmode \
-       source=sub/conftest.c object=$am__obj \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_$1_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[  --disable-dependency-tracking  speeds up one-time build
-  --enable-dependency-tracking   do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-])
-
-# Generate code to set up dependency tracking.              -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-#serial 5
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[{
-  # Autoconf 2.62 quotes --file arguments for eval, but not when files
-  # are listed without --file.  Let's play safe and only enable the eval
-  # if we detect the quoting.
-  case $CONFIG_FILES in
-  *\'*) eval set x "$CONFIG_FILES" ;;
-  *)   set x $CONFIG_FILES ;;
-  esac
-  shift
-  for mf
-  do
-    # Strip MF so we end up with the name of the file.
-    mf=`echo "$mf" | sed -e 's/:.*$//'`
-    # Check whether this is an Automake generated Makefile or not.
-    # We used to match only the files named `Makefile.in', but
-    # some people rename them; so instead we look at the file content.
-    # Grep'ing the first line is not enough: some people post-process
-    # each Makefile.in and add a new line on top of each file to say so.
-    # Grep'ing the whole file is not good either: AIX grep has a line
-    # limit of 2048, but all sed's we know have understand at least 4000.
-    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
-      dirpart=`AS_DIRNAME("$mf")`
-    else
-      continue
-    fi
-    # Extract the definition of DEPDIR, am__include, and am__quote
-    # from the Makefile without running `make'.
-    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-    test -z "$DEPDIR" && continue
-    am__include=`sed -n 's/^am__include = //p' < "$mf"`
-    test -z "am__include" && continue
-    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-    # When using ansi2knr, U may be empty or an underscore; expand it
-    U=`sed -n 's/^U = //p' < "$mf"`
-    # Find all dependency output files, they are included files with
-    # $(DEPDIR) in their names.  We invoke sed twice because it is the
-    # simplest approach to changing $(DEPDIR) to its actual value in the
-    # expansion.
-    for file in `sed -n "
-      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-      # Make sure the directory exists.
-      test -f "$dirpart/$file" && continue
-      fdir=`AS_DIRNAME(["$file"])`
-      AS_MKDIR_P([$dirpart/$fdir])
-      # echo "creating $dirpart/$file"
-      echo '# dummy' > "$dirpart/$file"
-    done
-  done
-}
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled.  FIXME.  This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
-     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
-     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Do all the work for Automake.                             -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 16
-
-# This macro actually does too much.  Some checks are only needed if
-# your package does certain things.  But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out.  PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition.  After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.62])dnl
-dnl Autoconf wants to disallow AM_ names.  We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
-  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
-  # is not polluted with repeated "-I."
-  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
-  # test to see if srcdir already configured
-  if test -f $srcdir/config.status; then
-    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-  fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
-  if (cygpath --version) >/dev/null 2>/dev/null; then
-    CYGPATH_W='cygpath -w'
-  else
-    CYGPATH_W=echo
-  fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
-  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
-	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-			     [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
-		  [_AM_DEPENDENCIES(CC)],
-		  [define([AC_PROG_CC],
-			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
-		  [_AM_DEPENDENCIES(CXX)],
-		  [define([AC_PROG_CXX],
-			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
-		  [_AM_DEPENDENCIES(OBJC)],
-		  [define([AC_PROG_OBJC],
-			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
-])
-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
-dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
-dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
-AC_CONFIG_COMMANDS_PRE(dnl
-[m4_provide_if([_AM_COMPILER_EXEEXT],
-  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-])
-
-dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
-dnl mangled by Autoconf and run in a shell conditional statement.
-m4_define([_AC_COMPILER_EXEEXT],
-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated.  The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_arg=$1
-_am_stamp_count=1
-for _am_header in $config_headers :; do
-  case $_am_header in
-    $_am_arg | $_am_arg:* )
-      break ;;
-    * )
-      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
-  esac
-done
-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\	*)
-    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
-  *)
-    install_sh="\${SHELL} $am_aux_dir/install-sh"
-  esac
-fi
-AC_SUBST(install_sh)])
-
-# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot.  For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
-else
-  am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Check to see how 'make' treats includes.	            -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-	@echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
-  am__include=include
-  am__quote=
-  _am_result=GNU
-  ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   case `$am_make -s -f confmf 2> /dev/null` in #(
-   *the\ am__doit\ target*)
-     am__include=.include
-     am__quote="\""
-     _am_result=BSD
-     ;;
-   esac
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 6
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-if test x"${MISSING+set}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\	*)
-    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
-  *)
-    MISSING="\${SHELL} $am_aux_dir/missing" ;;
-  esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
-else
-  am_missing_run=
-  AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for `mkdir -p'.
-AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
-  [[\\/$]]* | ?:[[\\/]]*) ;;
-  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
-
-# Helper functions for option handling.                     -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# ------------------------------
-# Set option NAME.  Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Check to make sure that the build environment is sane.    -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name.  Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
-  *[[\\\"\#\$\&\'\`$am_lf]]*)
-    AC_MSG_ERROR([unsafe absolute working directory name]);;
-esac
-case $srcdir in
-  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
-    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
-esac
-
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-   if test "$[*]" = "X"; then
-      # -L didn't work.
-      set X `ls -t "$srcdir/configure" conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$[*]" != "X $srcdir/configure conftest.file" \
-      && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "$[2]" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries.  This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
-  AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Public sister of _AM_SUBST_NOTMAKE.
-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
-
-# Check how to create a tarball.                            -*- Autoconf -*-
-
-# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-#     tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-#     $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
-m4_if([$1], [v7],
-     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
-     [m4_case([$1], [ustar],, [pax],,
-              [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
-  case $_am_tool in
-  gnutar)
-    for _am_tar in tar gnutar gtar;
-    do
-      AM_RUN_LOG([$_am_tar --version]) && break
-    done
-    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
-    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
-    am__untar="$_am_tar -xf -"
-    ;;
-  plaintar)
-    # Must skip GNU tar: if it does not support --format= it doesn't create
-    # ustar tarball either.
-    (tar --version) >/dev/null 2>&1 && continue
-    am__tar='tar chf - "$$tardir"'
-    am__tar_='tar chf - "$tardir"'
-    am__untar='tar xf -'
-    ;;
-  pax)
-    am__tar='pax -L -x $1 -w "$$tardir"'
-    am__tar_='pax -L -x $1 -w "$tardir"'
-    am__untar='pax -r'
-    ;;
-  cpio)
-    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
-    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
-    am__untar='cpio -i -H $1 -d'
-    ;;
-  none)
-    am__tar=false
-    am__tar_=false
-    am__untar=false
-    ;;
-  esac
-
-  # If the value was cached, stop now.  We just wanted to have am__tar
-  # and am__untar set.
-  test -n "${am_cv_prog_tar_$1}" && break
-
-  # tar/untar a dummy directory, and stop if the command works
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  echo GrepMe > conftest.dir/file
-  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
-  rm -rf conftest.dir
-  if test -s conftest.tar; then
-    AM_RUN_LOG([$am__untar <conftest.tar])
-    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
-  fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
diff --git a/src/common/configure.ac b/src/common/configure.ac
deleted file mode 100644
index f11e08e9..00000000
--- a/src/common/configure.ac
+++ /dev/null
@@ -1,32 +0,0 @@
-#                                               -*- Autoconf -*-
-# Process this file with autoconf to produce a configure script.
-# @configure_input@
-#
-
-AC_PREREQ([2.68])
-AC_INIT([getdns], [0.320], [melinda.shore@nomountain.net])
-AM_INIT_AUTOMAKE([getkey], [0.320])
-AC_CONFIG_SRCDIR([configure.ac])
-AC_CONFIG_HEADERS([config.h])
-
-# Checks for programs.
-AC_PROG_CC
-
-# Checks for libraries.
-AC_CHECK_LIB([event_core], [event_base_new])
-AC_CHECK_LIB([getdns], [getdns_context_create])
-AC_CHECK_LIB([ldns], [ldns_dname_new_frm_str])
-
-# Checks for header files.
-AC_CHECK_HEADERS([inttypes.h netinet/in.h stdint.h stdlib.h string.h])
-
-# Checks for typedefs, structures, and compiler characteristics.
-AC_HEADER_STDBOOL
-AC_TYPE_SIZE_T
-AC_TYPE_UINT16_T
-AC_TYPE_UINT32_T
-AC_TYPE_UINT64_T
-AC_TYPE_UINT8_T
-
-AC_CONFIG_FILES([Makefile])
-AC_OUTPUT
diff --git a/src/common/depcomp b/src/common/depcomp
deleted file mode 100755
index df8eea7e..00000000
--- a/src/common/depcomp
+++ /dev/null
@@ -1,630 +0,0 @@
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2009-04-28.21; # UTC
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
-# Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
-  '')
-     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
-  depmode     Dependency tracking mode.
-  source      Source file read by `PROGRAMS ARGS'.
-  object      Object file output by `PROGRAMS ARGS'.
-  DEPDIR      directory where to store dependencies.
-  depfile     Dependency file to output.
-  tmpdepfile  Temporary file to use when outputing dependencies.
-  libtool     Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "depcomp $scriptversion"
-    exit $?
-    ;;
-esac
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
-  echo "depcomp: Variables source, object and depmode must be set" 1>&2
-  exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
-  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags.  We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write.  Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
-  # HP compiler uses -M and no extra arg.
-  gccflag=-M
-  depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
-fi
-
-cygpath_u="cygpath -u -f -"
-if test "$depmode" = msvcmsys; then
-   # This is just like msvisualcpp but w/o cygpath translation.
-   # Just convert the backslash-escaped backslashes to single forward
-   # slashes to satisfy depend.m4
-   cygpath_u="sed s,\\\\\\\\,/,g"
-   depmode=msvisualcpp
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff.  Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am.  Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
-  for arg
-  do
-    case $arg in
-    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
-    *)  set fnord "$@" "$arg" ;;
-    esac
-    shift # fnord
-    shift # $arg
-  done
-  "$@"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  mv "$tmpdepfile" "$depfile"
-  ;;
-
-gcc)
-## There are various ways to get dependency output from gcc.  Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-##   up in a subdir.  Having to rename by hand is ugly.
-##   (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-##   than renaming).
-  if test -z "$gccflag"; then
-    gccflag=-MD,
-  fi
-  "$@" -Wp,"$gccflag$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
-  sed -e 's/^[^:]*: / /' \
-      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header).  We avoid this by adding
-## dummy dependencies for each header file.  Too bad gcc doesn't do
-## this for us directly.
-  tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'.  On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-sgi)
-  if test "$libtool" = yes; then
-    "$@" "-Wp,-MDupdate,$tmpdepfile"
-  else
-    "$@" -MDupdate "$tmpdepfile"
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-
-  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
-    echo "$object : \\" > "$depfile"
-
-    # Clip off the initial element (the dependent).  Don't try to be
-    # clever and replace this with sed code, as IRIX sed won't handle
-    # lines with more than a fixed number of characters (4096 in
-    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like `#:fec' to the end of the
-    # dependency line.
-    tr ' ' '
-' < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr '
-' ' ' >> "$depfile"
-    echo >> "$depfile"
-
-    # The second pass generates a dummy entry for each header file.
-    tr ' ' '
-' < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-aix)
-  # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  In older versions, this file always lives in the
-  # current directory.  Also, the AIX compiler puts `$object:' at the
-  # start of each line; $object doesn't have directory information.
-  # Version 6 uses the directory in both cases.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.u
-    tmpdepfile2=$base.u
-    tmpdepfile3=$dir.libs/$base.u
-    "$@" -Wc,-M
-  else
-    tmpdepfile1=$dir$base.u
-    tmpdepfile2=$dir$base.u
-    tmpdepfile3=$dir$base.u
-    "$@" -M
-  fi
-  stat=$?
-
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-    exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    # Each line is of the form `foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-    # That's a tab and a space in the [].
-    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-icc)
-  # Intel's C compiler understands `-MD -MF file'.  However on
-  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # ICC 7.0 will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want:
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-  # ICC 7.1 will output
-  #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using \ :
-  #    foo.o: sub/foo.c ... \
-  #     sub/foo.h ... \
-  #     ...
-
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  # Each line is of the form `foo.o: dependent.h',
-  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
-  # Do two passes, one to just change these to
-  # `$object: dependent.h' and one to simply `dependent.h:'.
-  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
-  # Some versions of the HPUX 10.20 sed can't process this invocation
-  # correctly.  Breaking it into two sed invocations is a workaround.
-  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
-    sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp2)
-  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
-  # compilers, which have integrated preprocessors.  The correct option
-  # to use with these is +Maked; it writes dependencies to a file named
-  # 'foo.d', which lands next to the object file, wherever that
-  # happens to be.
-  # Much of this is similar to the tru64 case; see comments there.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir.libs/$base.d
-    "$@" -Wc,+Maked
-  else
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir$base.d
-    "$@" +Maked
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-     rm -f "$tmpdepfile1" "$tmpdepfile2"
-     exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
-    # Add `dependent.h:' lines.
-    sed -ne '2,${
-	       s/^ *//
-	       s/ \\*$//
-	       s/$/:/
-	       p
-	     }' "$tmpdepfile" >> "$depfile"
-  else
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile" "$tmpdepfile2"
-  ;;
-
-tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in `foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
-   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mechanism is used in libtool 1.4 series to
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in $dir.libs/$base.o.d and
-      # in $dir$base.o.d.  We have to check for both files, because
-      # one of the two compilations can be disabled.  We should prefer
-      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-      # automatically cleaned when .libs/ is deleted, while ignoring
-      # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1=$dir$base.o.d
-      tmpdepfile2=$dir$base.d
-      tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
-      "$@" -MD
-   fi
-
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-      exit $stat
-   fi
-
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-   do
-     test -f "$tmpdepfile" && break
-   done
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a tab and a space in the [].
-      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
-
-#nosideeffect)
-  # This comment above is used by automake to tell side-effect
-  # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  test -z "$dashmflag" && dashmflag=-M
-  # Require at least two characters before searching for `:'
-  # in the target name.  This is to cope with DOS-style filenames:
-  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
-  "$@" $dashmflag |
-    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-dashXmstdout)
-  # This case only exists to satisfy depend.m4.  It is never actually
-  # run, as this mode is specially recognized in the preamble.
-  exit 1
-  ;;
-
-makedepend)
-  "$@" || exit $?
-  # Remove any Libtool call
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-  # X makedepend
-  shift
-  cleared=no eat=no
-  for arg
-  do
-    case $cleared in
-    no)
-      set ""; shift
-      cleared=yes ;;
-    esac
-    if test $eat = yes; then
-      eat=no
-      continue
-    fi
-    case "$arg" in
-    -D*|-I*)
-      set fnord "$@" "$arg"; shift ;;
-    # Strip any option that makedepend may not understand.  Remove
-    # the object too, otherwise makedepend will parse it as a source file.
-    -arch)
-      eat=yes ;;
-    -*|$object)
-      ;;
-    *)
-      set fnord "$@" "$arg"; shift ;;
-    esac
-  done
-  obj_suffix=`echo "$object" | sed 's/^.*\././'`
-  touch "$tmpdepfile"
-  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile" "$tmpdepfile".bak
-  ;;
-
-cpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  "$@" -E |
-    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  cat < "$tmpdepfile" >> "$depfile"
-  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvisualcpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  IFS=" "
-  for arg
-  do
-    case "$arg" in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-	set fnord "$@"
-	shift
-	shift
-	;;
-    *)
-	set fnord "$@" "$arg"
-	shift
-	shift
-	;;
-    esac
-  done
-  "$@" -E 2>/dev/null |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
-  echo "	" >> "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvcmsys)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-none)
-  exec "$@"
-  ;;
-
-*)
-  echo "Unknown depmode $depmode" 1>&2
-  exit 1
-  ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End: