OSX-KVM - November 2021 Batch Update #1

References.md

@@ -13,3 +13,7 @@
 * https://github.com/ofawx/VmAssetCacheEnable
 
 * https://dortania.github.io/OpenCore-Install-Guide/troubleshooting/extended/post-issues.html
+
+- https://wiki.archlinux.org/title/QEMU#UNIX_socket
+
+- https://wiki.archlinux.org/title/PCI_passthrough_via_OVMF#USB_controller

boot-passthrough.sh

@@ -46,6 +46,7 @@ args=(
   # 01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590] [1002:aaf0]
   #         Subsystem: Sapphire Technology Limited Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590] [1da2:aaf0]
   -device vfio-pci,host=01:00.0,multifunction=on
+  # -device vfio-pci,host=01:00.0,multifunction=on,romfile=gpu_original_bios.bin
   -device vfio-pci,host=01:00.1
   # ASMedia ASM1142 USB 3.1 Host Controller (comment out as needed)
   # 03:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1142 USB 3.1 Host Controller [1b21:1242]

notes.md

@@ -170,6 +170,17 @@ AMD RX 570 GPU (May 2021).
 * To reuse the keyboard and mouse devices from the host, setup "Automatic
   login" in System Preferences in macOS and configure Synergy software.
 
+Note: On `Pop!_OS`, use the `kernelstub` command to change the kernel boot
+arguments.
+
+Note 2: Use [AMD VBFlash](https://www.techpowerup.com/download/ati-atiflash/)
+to dump the AMD GPU bios, and pass on to QEMU. This is especially required if
+your AMD GPU is not starting up properly (resulting in "no signal" on the
+monitor).
+
+Tested GPUs: ZOTAC GeForce GT 710 DDR3 (<= Big Sur), Sapphire Radeon RX 570.
+
+
 UPDATE: Project sponsors get access to the `Private OSX-KVM repository`, and
 direct support. This private repository has a playbook to automate 95% of this
 work in a rugged, consistent manner.