Merge 08e95d8580 into 326053dd61

OpenCore-Boot-NoUI.sh

@@ -0,0 +1,50 @@
+#!/usr/bin/env bash
+
+MY_OPTIONS="+ssse3,+sse4.2,+popcnt,+avx,+aes,+xsave,+xsaveopt,check"
+
+ALLOCATED_RAM="8192" # MiB
+CPU_SOCKETS="1"
+CPU_CORES="2"
+CPU_THREADS="4"
+
+REPO_PATH="."
+OVMF_DIR="."
+
+args=(
+  -enable-kvm -m "$ALLOCATED_RAM"
+
+  # Set the CPU model and options
+  # Use Haswell-noTSX for Sonoma and Penryn for older versions
+  -cpu Haswell-noTSX,kvm=on,vendor=GenuineIntel,+invtsc,vmware-cpuid-freq=on,"$MY_OPTIONS"
+
+  -machine q35
+  -device qemu-xhci,id=xhci
+  -device usb-kbd,bus=xhci.0 -device usb-tablet,bus=xhci.0
+  -smp "$CPU_THREADS",cores="$CPU_CORES",sockets="$CPU_SOCKETS"
+  -device usb-ehci,id=ehci
+  -device isa-applesmc,osk="ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc"
+  -drive if=pflash,format=raw,readonly=on,file="$REPO_PATH/$OVMF_DIR/OVMF_CODE.fd"
+  -drive if=pflash,format=raw,file="$REPO_PATH/$OVMF_DIR/OVMF_VARS-1920x1080.fd"
+  -smbios type=2
+  -device ich9-intel-hda -device hda-duplex
+  -device ich9-ahci,id=sata
+  
+  # Add the OpenCore bootloader drive with boot priority 
+  -drive id=OpenCoreBoot,if=none,snapshot=on,format=qcow2,file="$REPO_PATH/OpenCore/OpenCore.qcow2"
+  -device ide-hd,bus=sata.2,drive=OpenCoreBoot,bootindex=1
+
+  # Add the macOS hard drive
+  -drive id=MacHDD,if=none,file="$REPO_PATH/mac_hdd_ng.img",format=qcow2
+  -device ide-hd,bus=sata.4,drive=MacHDD
+
+  # Configure network with port forwarding for SSH access
+  -netdev user,id=net0,hostfwd=tcp::2222-:22
+  -device virtio-net-pci,netdev=net0,id=net0,mac=52:54:00:c9:18:27
+
+  # Disable the QEMU monitor interface and graphical output
+  -monitor none
+  -nographic
+)
+
+# Start the QEMU virtual machine in the background and disown the process
+qemu-system-x86_64 "${args[@]}" > /dev/null 2>&1 & disown

OpenCore-Boot.sh

@@ -13,7 +13,7 @@
 # NOTE: Tweak the "MY_OPTIONS" line in case you are having booting problems!
 ###############################################################################
 #
-# Change `Penryn` to `Haswell-noTSX` in OpenCore-Boot.sh file for macOS Sonoma!
+# Change `Haswell-noTSX` to `Penryn` in OpenCore-Boot.sh file for macOS Ventura and older versions!
 #
 ###############################################################################
 
@@ -23,7 +23,7 @@ MY_OPTIONS="+ssse3,+sse4.2,+popcnt,+avx,+aes,+xsave,+xsaveopt,check"
 # This script works for Big Sur, Catalina, Mojave, and High Sierra. Tested with
 # macOS 10.15.6, macOS 10.14.6, and macOS 10.13.6.
 
-ALLOCATED_RAM="4096" # MiB
+ALLOCATED_RAM="8192" # MiB
 CPU_SOCKETS="1"
 CPU_CORES="2"
 CPU_THREADS="4"
@@ -33,7 +33,12 @@ OVMF_DIR="."
 
 # shellcheck disable=SC2054
 args=(
-  -enable-kvm -m "$ALLOCATED_RAM" -cpu Penryn,kvm=on,vendor=GenuineIntel,+invtsc,vmware-cpuid-freq=on,"$MY_OPTIONS"
+  -enable-kvm -m "$ALLOCATED_RAM" 
+
+  # Set the CPU model and options
+  # Use Haswell-noTSX for Sonoma and Penryn for older versions
+  -cpu Haswell-noTSX,kvm=on,vendor=GenuineIntel,+invtsc,vmware-cpuid-freq=on,"$MY_OPTIONS"
+
   -machine q35
   -device qemu-xhci,id=xhci
   -device usb-kbd,bus=xhci.0 -device usb-tablet,bus=xhci.0
@@ -53,9 +58,12 @@ args=(
   -device ich9-intel-hda -device hda-duplex
   -device ich9-ahci,id=sata
   -drive id=OpenCoreBoot,if=none,snapshot=on,format=qcow2,file="$REPO_PATH/OpenCore/OpenCore.qcow2"
-  -device ide-hd,bus=sata.2,drive=OpenCoreBoot
+  -device ide-hd,bus=sata.2,drive=OpenCoreBoot,bootindex=1
+
+  # **IMPORTANT:** Make sure to comment out the following two lines after macOS installation
   -device ide-hd,bus=sata.3,drive=InstallMedia
   -drive id=InstallMedia,if=none,file="$REPO_PATH/BaseSystem.img",format=raw
+
   -drive id=MacHDD,if=none,file="$REPO_PATH/mac_hdd_ng.img",format=qcow2
   -device ide-hd,bus=sata.4,drive=MacHDD
   # -netdev tap,id=net0,ifname=tap0,script=no,downscript=no -device virtio-net-pci,netdev=net0,id=net0,mac=52:54:00:c9:18:27

README-NoUI.md

@@ -0,0 +1,108 @@
+## Setup Instructions - SSH iOS Development Environment
+
+### Step 1: Clone the Repository
+
+Clone this repository to your local machine and navigate to the repository root.
+
+### Step 2: Follow Initial Setup Instructions
+
+Follow the steps in the [README.md](README.md) file to set up the environment and install macOS (Sonoma).
+
+### Step 3: Initial VM Boot
+
+Start the VM for the first time with the GUI to complete the initial macOS setup:
+
+```bash
+./OpenCore-Boot.sh
+```
+
+Complete the macOS setup and install XCode and other GUI-dependent tools.
+
+**Note:** Active SSH on macOS `System Preferences > Sharing > Remote Login`.
+
+### Step 4: Install XCode and Generate Unique Serial
+
+If you need to install XCode, you'll need a unique serial number. Complete steps 1-5 below and start `./OpenCore-Boot.sh` again to connect to your Apple account, install XCode, and other tools.
+
+1. Navigate or clone GenSMBIOS repository into workspace:
+
+    ```bash
+    git clone https://github.com/corpnewt/GenSMBIOS.git
+    cd GenSMBIOS
+    ```
+
+2. Make `GenSMBIOS.command` executable and run it:
+
+    ```bash
+    chmod +x GenSMBIOS.command
+    ./GenSMBIOS.command
+    ```
+
+3. Install/Update MacSerial.
+4. Select `$osx_kvm_path/OpenCore/Boot-NoUI/config.plist` as the configuration file.
+5. Generate SMBIOS for `iMacPro1,1`.
+6. Generate UUID.
+
+### Step 5: Generate OpenCore Image with NoUI Configuration
+
+```bash
+# Update submodule
+git submodule update --init --recursive ./resources/OcBinaryData
+
+cd ./OpenCore
+
+# Generate OpenCore image with NoUI configuration
+rm -f OpenCore.qcow2; sudo ./opencore-image-ng.sh --cfg ./Boot-NoUI/config.plist --img OpenCore.qcow2
+```
+
+### Step 6: Start OpenCore VM with NoUI Configuration
+
+```bash
+# Navigate to repository root
+cd $osx_kvm_path
+# cd ..
+
+# Make the shell script executable
+chmod +x ./OpenCore-Boot-NoUI.sh
+
+./OpenCore-Boot-NoUI.sh
+```
+
+### Step 7: Connect to macOS VM with SSH
+
+```bash
+ssh -p 2222 $user_name@localhost
+```
+
+### Step 8: Map Port 22 to 2222 and Open Firewall
+
+```bash
+# Map port 22 to 2222
+sudo iptables -t nat -A PREROUTING -p tcp --dport 22 -j REDIRECT --to-port 2222
+
+# Open firewall
+sudo iptables -A INPUT -p tcp --dport 22 -j ACCEPT
+```
+
+### Step 9: Connect from Any Device on the Network to the VM
+
+```bash
+ssh $user_name@$vm_host_ip
+```
+
+### Step 10: Shutdown the VM
+
+```bash
+# (run on mac via SSH)
+sudo shutdown -h now
+```
+
+## Additional Notes
+
+When you use the VSCode Remote SSH extension, you will disconnect from the VM as soon as the VM enters sleep mode. To prevent this, you can enable automatic login and disable lock screen in the macOS settings. This way, the user will be logged in automatically when the VM starts and won't enter sleep mode.
+
+I personally use Nix flakes to manage the environment, so I can install all the required tools with `nix develop` and run the scripts from there. (The Nix package manager does not support XCode, so you need to install it manually first.)
+
+Additionally, I use GitHub to store my credentials, which allows me to just copy the `.gitconfig` and `.git-credentials` to the user home directory on the VM.
+
+To debug iOS apps, it's easiest to use XCode Wi-Fi debugging, so you don't need to connect the phone to the VM.

fetch-macOS-v2.py

@@ -529,8 +529,8 @@ def main():
             {"name": "Catalina (10.15)", "b": "Mac-00BE6ED71E35EB86", "m": "00000000000000000", "short": "catalina"},
             {"name": "Big Sur (11.7)", "b": "Mac-2BD1B31983FE1663", "m": "00000000000000000", "short": "big-sur"},
             {"name": "Monterey (12.6)", "b": "Mac-B809C3757DA9BB8D", "m": "00000000000000000", "os_type": "latest", "short": "monterey"},
-            {"name": "Ventura (13) - RECOMMENDED", "b": "Mac-4B682C642B45593E", "m": "00000000000000000", "os_type": "latest", "short": "ventura"},
-            {"name": "Sonoma (14) ", "b": "Mac-A61BADE1FDAD7B05", "m": "00000000000000000", "short": "sonoma"}
+            {"name": "Ventura (13)", "b": "Mac-4B682C642B45593E", "m": "00000000000000000", "os_type": "latest", "short": "ventura"},
+            {"name": "Sonoma (14) - RECOMMENDED", "b": "Mac-A61BADE1FDAD7B05", "m": "00000000000000000", "short": "sonoma"}
     ]
     for index, product in enumerate(products):
         name = product["name"]